Replacement heavy-duty jack leg is ready to get back on the job site! Front-facing plunger pin is easy to reach when using the adjustable drop leg. Jack lifts 5 tons supported by a strong carbon steel frame. ... But, if you are just using it to stabilize or support a parked trailer, then you should focus on the jack's support capacity. Heavy-duty jacks like this one stabilize about 25% of your trailer's total weight when it's loaded up.
Minimize chassis movement in your fifth-wheel RV with this jack stabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear.Features: Helps to stabilize your 5th-wheel RV and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on 5th-wheel campers Bolts onto C-channel, I-beam or H-beam trailer frames - no welding required Attaches to traditional stabilizer jacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Bolt-on installation - no welding required One end of each stabilizer tube attaches to each landing gear leg and the other end attaches to the RV frame Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 2 Clevis brackets 6 Stiffening pads 4 Spacer mounts 6 T-bolts 4 Flanged bushings 30 Nuts 48 Washers 18 Hex cap screws 10 Swing bolts 2 Silver bullet lifting handles 2 Hex nuts 8 Hex washer heads 1 Warning sticker for jacks Application: 5th-wheel trailers with 58" or more between front landing gear legs 1-Year warranty
Stabilize and level your travel or 5th-wheel trailer with this unique device. Designed to span the width of your rig for maximum support, the opposing sides of this stabilizer can be adjusted independently for effective leveling.Features: Cross-frame-mount jack stops front-to-back and side-to-side motion of travel or 5th-wheel trailer Provides support across the width of your motor home or trailer Not recommended for use on front of motorized vehicle Stabilizes with wide side support brackets Connecting bracket holds sides of stabilizer together and provides additional support Adjusts to fit the width of your trailer or RV Extra-large footplates help to minimize sinking and tilting Hand crank attaches for manual operation Sturdy steel construction Specs: Application: trailers and RVs with frames from 48" to 80" wide Lift: 30" Bracket width: 36" Weight capacity: 6,000 lbs 3-Year warranty
Minimize chassis movement in your fifth-wheel RV with this jack stabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear.Features: Helps to stabilize your 5th-wheel RV and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on 5th-wheel campers Bolts onto C-channel, I-beam or H-beam trailer frames - no welding required Attaches to traditional stabilizer jacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Bolt-on installation - no welding required One end of each stabilizer tube attaches to each landing gear leg and the other end attaches to the RV frame Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 2 Clevis brackets 6 Stiffening pads 4 Spacer mounts 6 T-bolts 4 Flanged bushings 30 Nuts 48 Washers 18 Hex cap screws 10 Swing bolts 2 Silver bullet lifting handles 2 Hex nuts 8 Hex washer heads 1 Warning sticker for jacks Application: 5th-wheel trailers with less than 58" between front landing gear legs 1-Year warranty Specs: Telescoping tube: Retracted length: (2) 24" and (2) 27" Extended length: (2) 44" and (2) 47" 1-Year limited warranty
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for 13-3/4" of lift in addition to the 15" of screw travel. ... Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black powder coated finish on inner and outer tubes Sidewind handle has curved edges - no sharp ends Footplate minimizes sinking in soft ground Weld-on installation Specs: Height (from bottom of foot to top of jack): 27-1/8" Retracted 41-7/8" Extended Total lift: 28-3/4" Screw travel: 15" Drop leg travel: 13-3/4" Lift capacity: 12,000 lbs Support capacity: 15,000 lbs Outer tube width: 4-5/16" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Pull the front-facing plunger pin on this jack to release the drop leg for 13-1/2" of lift on top of the 12-3/8" of screw travel. Durable screw offers increased strength. ... Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle has curved edges - no sharp ends Handle can be secured for travel with included weld-on clip Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Total lift: 25-7/8" Screw travel: 12-3/8" Drop leg travel: 13-1/2" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Pull the front-facing plunger pin on this jack to release the drop leg for 13-3/4" of lift on top of the 15" of screw travel. Durable screw offers increased strength. ... Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Lift capacity: 12,000 lbs Support capacity : 15,000 lbs Total travel: 28-3/4" Screw travel : 15" Drop leg travel : 13-3/4" Overall height: 27-1/8" Retracted 41-7/8" Extended Outer tube width: 4-5/16" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 3-3/8" on center Jack screw diameter: 1" 1-Year warranty
Pull the front-facing plunger pin on this jack to release the drop leg for 13-1/2" of lift on top of the 12-3/8" of screw travel. Durable screw offers increased strength. ... Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Total lift: 25-7/8" Screw travel: 12-3/8" Drop leg travel: 13-1/2" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. Get maximum lifting power in low gear and fast cranking in high gear. ... Features: 2-Speed jack lets you raise and lower your trailer Low gear offers full lifting power High gear provides ultimate speed Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1-1/4" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Total lift: 25-7/8" Screw travel: 12-3/8" Drop leg travel: 13-1/2" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Powered A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 10-3/4", an extended height of 28-3/4", and 18" of travel. ... It also has helical-cut gears, which have angled teeth that mesh together clearly. This allows for quieter, more efficient operation than a jack that uses a standard Acme screw. To ensure great performance even at night, this jack also comes with a front-facing light that houses 3 LEDs.
This fast electric A-frame jack has a durable, super-efficient ball screw and a memory function for fast, easy setup. Offers 26" of total lift. Extends 6" in 18.4 seconds with 1,000 lbs of tongue weight.Features: Electric jack lets you lift and lower your A-frame trailer quickly and easily Efficient ball screw makes it fast and easy to position your trailer Ball bearings roll along sturdy, threaded steel rod Powered drive provides quiet operation and eliminates the need for hand cranking Easy-to-access on/off and retract/extend buttons make for simple operation Buttons on front panel will not break off like standard toggle switches Wireless capability - operate jack with included remote control key fob Hitch memory function stores hitch height and weight distribution system height to make hooking up simple Automatically returns your trailer to the position at which you unhooked LED courtesy light on front of jack allows for simple nighttime setup Durable powder coat finish resists corrosion Emergency override allows manual operation in case of power failure Included adapter allows you to easily use your drill to raise and lower the jack Manual crank handle not included Bolt-on installation Specs: Bracket height: Retracted: 10-1/2" Total lift: 26" Screw travel: 21" Drop leg travel: 5" Travel speed (w/ 1,000-lb tongue weight): Extends 6" in 18.4 seconds Retracts 6" in 18.7 seconds Lift capacity: 5,500 lbs Outer tube diameter: 2-1/4" Footplate diameter: 7" Motor attributes: 12 Volt 2-Year warranty 10-Year warranty when registered within 90 days How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Electric camper jack system lets you load and unload your truck bed camper faster and easier than manual cranking. Jacks install permanently on the 4 corners of your camper. ... Easy Installation The included mounting brackets are used to attach the jacks to each corner of your camper. The L-brackets and flat brackets secure the jacks to the front of your camper while the Z-brackets are used to secure the jacks to the rear of your camper.
Electric camper jack system lets you load and unload your truck bed camper faster and easier than manual cranking. Jacks install permanently on the 4 corners of your camper. ... Easy Installation The included mounting brackets are used to attach the jacks to each corner of your camper. The L-brackets and flat brackets secure the jacks to the front of your camper while the Z-brackets are used to secure the jacks to the rear of your camper.
With a front-facing plunger pin and 29-1/2" retracted height, this jack offers maximum lifting power in low gear and the fastest cranking in its weight class in high gear. ... Features: 2-Speed design makes cranking faster and easier Low gear: full lifting power offers smooth and easy ratio of 1" every 27 turns High gear: ultimate speed with 1" for every 9 turns - fastest in the weight class Ideal for standard agricultural, construction and industrial trailer applications Planetary gearbox makes switching gears fast and easy No need to reposition crank Eliminates need for spacers by fitting within the jack's width profile Smooth and simple operation Specially engineered alloys provide strength and stability Painted surfaces include both inner and outer tubes and drop leg Drop leg with non-spring return increases overall extension for maximum adjustability "Non-spring return" means user will need to physically lift jack at the foot to return to up position Plunger pin positioned to the front Standard footplate included Sidewind crank not included Specs: Bracket height: 29-1/2" Retracted 42" Extended Total lift: 26" Travel: 12-1/2" Drop leg: 13-1/2" Tubing width: 4" Lift capacity: 10,000 lbs Static capacity: 12,000 lbs Limited 5-year warranty
This super-fast electric A-frame jack has a durable, efficient ball screw and a memory function for easy setup. Offers 18" of travel and 4-1/2" of extension with the drop leg. ... Features: Electric jack lets you lift and lower your A-frame trailer quickly and easily Efficient ball screw makes it fast and easy to position your trailer Ball bearings roll along sturdy, threaded steel rod Powered drive provides quiet operation and eliminates the need for hand cranking Easy-to-access on/off and retract/extend buttons make for simple operation Buttons on front panel will not break off like standard toggle switches LED courtesy light on front of jack allows for simple nighttime setup Durable powder coat finish resists corrosion Emergency override allows manual operation in case of power failure Included adapter allows you to easily use your drill to raise and lower the jack Manual crank handle not included Bolt-on installation Specs: Bracket height: 10-1/2" Retracted - from mounting bracket to bottom of footpad 28-1/2" Extended - from the bottom of the extended jack and extended footpad Total travel: 22-1/2" Travel: 18" Drop leg: 4-1/2" Drop leg: 4 adjustment holes 1-1/2" apart center to center Travel speed (w/ 1,000-lb tongue weight): Extends 6" in 9.5 seconds Retracts 6" in 8.6 seconds Lift capacity: 4,000 lbs Outer tube diameter: 2-1/4" Footplate diameter: 6" Motor attributes: 12 Volt 10" Travel in 18 seconds 2-Year warranty 10-Year warranty if registered within 90 days How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Load and unload your truck bed camper with these manual camper jacks. Jacks install permanently on the 4 corners of your camper for stable and convenient loading and unloading.The L-brackets and flat brackets secure the jacks to the front of your camper while the Z-brackets are used to secure the jacks to the rear of your camper. For dually pickup trucks, an optional swing-out bracket (LC182496) can be easily installed to give you the additional clearance you'll need for easy loading and unloading.
Load and unload your truck bed camper with these manual camper jacks. Jacks install permanently on the 4 corners of your camper for stable and convenient loading and unloading.The L-brackets and flat brackets secure the jacks to the front of your camper while the Z-brackets are used to secure the jacks to the rear of your camper. For dually pickup trucks, an optional swing-out bracket (LC182496) can be easily installed to give you the additional clearance you'll need for easy loading and unloading.
Minimize chassis movement in your travel trailer with this jack stabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear.Features: Helps to stabilize your travel trailer and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on travel trailers Bolts onto C-channel, I-beam, or H-beam trailer frames - no welding required Attaches to traditional stabilizer jacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 6 Stiffening pads 4 Spacer mounts 6 T-bolts 30 Nuts 48 Washers 18 Hex cap screws 12 Swing bolts 8 Hex washer heads 1-Year warranty
... Heavy-duty jack screw can lift up to 5 tons.Features: Easy-to-use foot lever faces the front - no more bending, squatting, or muddy knees Use the drop leg completely hands-free Drop leg extension makes up about half of the total travel Works best if you have open space between your trailer and your truck Heavy-duty internal components Durable jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Black powder coated finish on inner and outer tubes Footplate minimizes sinking in soft ground Single speed gearbox is easy to maintain even in a long life of hard work Use the grease zerk fittings to help keep gears working smoothly Weld-on installation Includes footplate, handle, and connecting pin Specs: Lift capacity: 12,000 lbs Support capacity : 20,000 lbs Total travel: 26-1/2" Screw travel : 13-1/2" Drop leg travel : 13" Overall height (from bottom of foot to top of jack): Retracted: 29-1/2" Extended: 56" Outer tube width: 4-3/8" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 2-1/2" on center Jack screw diameter: 1-1/4" 1-Year warranty How to Determine the Support Capacity You Need in Your Landing Gear If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity.
Perfect for campers, RV travelers, and anyone using a trailer, these jacks make life easier and more enjoyable. They're designed with comfort and convenience in mind, helping you save time and energy for what matters most - your journey.Power Connection: Wires directly to 12-volt power source Automatic Reset, No Hassle: The 20A automatic reset relay fuse protects the jacks motor from overloads or short circuits and resets itself automatically, no need for spares or replacements Nighttime Convenience: LED courtesy light on front of jack makes nighttime setup simple Protective Cover: Canvas cover shields your jack from the suns harmful rays and harsh weather Emergency Backup: Manual crank included for peace of mind when needed Moisture Protection: Rubber cover over the crank opening keeps out moisture and the elements Durable Finish: Tough black powder coat finish resists rust and corrosion Specs: Lift: 18" Lift capacity: 5,000 lbs Dimensions: Overall height: 29-1/2" Mounting plate height: 8-7/8" Footplate diameter: 5-1/2" Outer tube diameter: 2-1/4" Motor voltage: 12 volts 2-Year warranty
Perfect for campers, RV travelers, and trailer users, these jacks make adventures easier and more enjoyable. Designed for convenience and reliability, they save time and energy, so you can focus on what truly matters - your journey.Power Connection: Wires directly to 12-volt power source Automatic Reset, No Hassle: The 20A automatic reset relay fuse protects the jacks motor from overloads or short circuits and resets itself automatically, no need for spares or replacements Nighttime Convenience: LED courtesy light on front of jack makes nighttime setup simple Protective Cover: Canvas cover shields your jack from the suns harmful rays and harsh weather Emergency Backup: Manual crank included for peace of mind when needed Moisture Protection: Rubber cover over the crank opening keeps out moisture and the elements Durable Finish: Tough black powder coat finish resists rust and corrosion Warranty: Limited lifetime warranty Specs: Lift: 18" Lift capacity: 3,500 lbs Dimensions: Overall height: 29-1/2" Mounting plate height: 8-7/8" Footplate diameter: 5-1/2" Outer tube diameter: 2-1/4" Motor voltage: 12 volts 2-Year warranty
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. The durable jack screw offers increased strength. ... Features: 2-Speed jack lets you raise and lower your trailer Low gear offers full lifting power High gear provides ultimate speed Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the side Durable 1-1/4" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle has curved edges - no sharp ends Handle can be secured for travel with included weld-on clip Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Total lift: 25-7/8" Screw travel: 12-3/8" Drop leg travel: 13-1/2" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Heavy-duty jack stabilizes your lightweight cargo or camper trailer. Leg telescopes to the ground when you release the lever. Jack swings up for storage. ... Do not use this jack to lift your trailer or RV. Doing so will exceed the capacity of the jack. This stabilizer jack is handy for leveling or stabilizing lightweight trailers.
Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 5,000 lbs. It has 18" of travel and a 5" drop leg for extra lift. ... In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
Filters
