A perfect match for DeeZee Brite-Tread running boards, these 2 tread plate, aluminum mud flaps offer serious (and stylish) protection from road debris. Standard mud flaps are 12" wide x 16" long and powder coated for durability.Features: Constructed of classic, Brite-Tread aluminum - rustproof Powder coated for durability Measure 12" wide x 16" long Fit full-size trucks Install at rear of vehicle Do not fit pickups with fenderflares Includes 2 mud flaps Made in the USA 1-Year limited warranty
Straight trailer axle measures 95" from hub face to hub face and 80" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 13" to 15" wheels. E-Z Lube spindles for simple lubrication.
Waterproof, 2-LED marker light with chrome trim can be installed on either your driver's-side or passenger's-side trailer fender. Amber light faces front, and red light faces rear. Surface mount. 2-Wire pigtail. P2 rated.Features: 2-Sided clearance light installs on your trailer fender Amber light faces front of trailer Red light faces rear of trailer Reversible assembly can be installed on either driver's-side or passenger's-side fender Sonically sealed, waterproof unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Clear polycarbonate lenses with red and amber LEDs Chrome-plated ABS plastic trim snaps on for a finished look Mounts on surface of trailer - hardware not included 2-Wire pigtail with power lead and ground wire DOT compliant P2 rated Specs: Dimensions: 1-5/8" long x 13/16" tall x 1-1/4" wide Distance between mounting holes (center to center): 1-1/4" Diodes: 2 Power draw at 12.8 volts: 0.04 amps Quantity: 1 fender clearance/marker light Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Waterproof clearance/marker light can be installed on either your driver's-side or passenger's-side trailer fender. Amber light faces front, and red light faces rear. Surface mount with durable ABS plastic base. 2-Wire pigtail. P2 rated.Features: Dual clearance light installs on your trailer fender Amber lens faces front of trailer Red lens faces rear of trailer Reversible assembly can be installed on either driver's-side or passenger's-side fender Light pops out of bracket and flips around to switch sides Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lenses and housings Mounts on surface of trailer with black ABS plastic bracket - hardware not included 2-Wire pigtail - includes power lead and ground wire DOT compliant P2 rated Specs: Dimensions: 8-1/2" long x 1-11/16" tall x 13/16" deep Mounting hole dimensions (center to center): 1" Diodes: 2 Power draw at 12.8 volts: 0.033 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Stylish mud flaps contour around your wheel wells to provide protection for your fenders from road debris. Polymer construction is more rigid and less likely to sail than rubber splash guards, but still flexible and forgiving.Features: Mud flaps shield your vehicle, towed cargo, and other cars from rocks, grime, and road debris Protects your boat, car, snowmobile, ATV, 5th-wheel trailer, or other towed gear Creates a barrier between your tires and wheel well to prevent mud, salt, and snow buildup Contours around your wheel well to provide more protection for your fenders Thermoflex is a durable polymer (hard plastic) that is highly flexible Won't break in strong winds or subfreezing temperatures Won't sail or flap like rubber material Black color helps hides dirt Bolt-on installation - hardware not included Made in the USA Specs: Quantity: 2 mud flaps Flap dimensions: 12" wide x 37" tall x 1/8" thick Fender Guard Mud Flaps These truck or trailer mud flaps are constructed of Thermoflex, a hard plastic that is both durable and flexible.
Weatherproof clearance/marker light installs on your driver-side trailer fender. Amber light faces front, and red light faces rear. Surface mount with ABS plastic base. 2-wire pigtail. P2 rated.Features: Dual clearance light installs on your trailer fender Amber lens faces front of trailer Red lens faces rear of trailer Designed for driver side fender Weatherproof housing and lens protect against water damage LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Mounts on surface of trailer with black ABS plastic bracket - hardware not included 2-Wire pigtail - includes power lead and ground wire DOT compliant P2 rated Specs: Configuration: driver side (left side) Passenger side: DG52443VP (sold separately) Quantity: 1 fender light Diodes: 2 Overall dimensions: 6-1/4" long x 2-1/8" wide x 3/4" deep Distance between mounting holes (center on center): 1-1/16" 1-Year limited warranty
3-7/8" x 1-1/4" Rectangle. Trailer fender light functions as both amber front clearance and red rear clearance light. Hard-wired terminals are potted with polyurethane. Surface mounts with bracket (sold separately). ... Features: Dual-face LED trailer light functions as both amber front clearance and red rear clearance light Great for boat, cargo, and horse trailers LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate base with acrylic lens Amber and red lenses with amber and red LEDs Compatible with 12V DC systems Mounts on surface of trailer fender with bracket (sold separately) - hardware not included Designed for top or side placement at widest point of trailer Accepts industry standard 2-prong plug P2 rated light produces a 90-degree beam pattern DOT compliant Specs: Overall dimensions: 3-7/8" long x 1-1/4" tall x 7/8" deep Bolt hole radius: 3-1/16" Diodes: 2 Power draw at 12V: 0.08 amps Limited lifetime warranty P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
8-1/4" x 3-1/4". Incandescent marker light mounts on your trailer fender. Built-in reflex reflector. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. Pre-wired design. (2) 194 bulbs.Features: Dual-face incandescent trailer light installs on your trailer fender Amber light faces the front of trailer Red light faces the rear of trailer Built-in reflex reflector removes the need for a separate reflector Incandescent bulbs can be easily replaced Druable polycarbonate housing and lens Red and amber lens over incandescent bulbs Compatible with 12V DC systems Surface mount with included mounting bracket Pre-wired design includes female barrel and grounding eyelet DOT complaint P2 rated Specs: Configuration: passenger side Driver side: BA44FNL - sold separately Dimensions: 8-1/2" long x 3-1/4" wide Distance between mounting holes (center on center): 1-1/2" Bulb type: 194 Number of bulbs: 2 Power draw at 12.8V: 0.4 amps 3-Year warranty P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
Weatherproof clearance/marker light installs on your passenger-side trailer fender. Amber light faces front, and red light faces rear. Surface mount with ABS plastic base. 2-wire pigtail. P2 rated.Features: Dual clearance light installs on your trailer fender Amber lens faces front of trailer Red lens faces rear of trailer Designed for passenger side fender Weatherproof housing and lens protect against water damage LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Mounts on surface of trailer with black ABS plastic bracket - hardware not included 2-Wire pigtail - includes power lead and ground wire DOT compliant P2 rated Specs: Configuration: passenger side (right side) Driver side: DG52444VP (sold separately) Quantity: 1 fender light Diodes: 2 Overall dimensions: 6-1/4" long x 2-1/8" wide x 3/4" deep Distance between mounting holes (center on center): 1-1/16" 1-Year limited warranty
Dependable LED lighting that outperforms engineered, built in the USA, backed by lifetime warranty. From trailers to trucks to marine, its durable, bright, and ready for anything.Features: Powered by 2 LEDs Impact resistant lens for fender Fully submersible bi color red and amber LEDs Specs: Measurements: 3-3/4" long x 7/8" tall x 7/8" deep LEDs: 2 LEDs Color: Red / Amber Voltage: 9 to 14 volts DC Mounting: Surface mounted with 3" hole spacing Wiring: 9" sheathed pigtail Lifetime warranty TecNiq packs durability to withstand the harsh elements and vigorous use in this heavy duty mini fender light.
3-3/4" x 7/8" Oblong. Waterproof LED marker light can be installed on your trailer fender. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. 2-Wire pigtail. P2 rated.Features: Dual-face LED trailer light installs on your trailer fender Sonically sealed, waterproof unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Red and amber lens over white LEDs Compatible with 12V DC systems Surface mount on trailer with included bracket 2-Wire pigtail with power lead and ground wire P2 rated light produces a 90-degree beam pattern Specs: Quantity: 1 fender light Dimensions with bracket: 3-3/4" long x 7/8" tall x 13/16" thick Distance between mounting holes (center on center): 3" Diodes: 2 Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
8-1/4" x 3-1/4". Incandescent marker light mounts on your trailer fender. Built-in reflex reflector. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. Pre-wired design. (2) 194 bulbs.Features: Dual-face incandescent trailer light installs on your trailer fender Amber light faces the front of trailer Red light faces the rear of trailer Built-in reflex reflector removes the need for a separate reflector Incandescent bulbs can be easily replaced Druable polycarbonate housing and lens Red and amber lens over incandescent bulbs Compatible with 12V DC systems Surface mount with included mounting bracket Installation hardware not included Pre-wired design includes female barrel and grounding eyelet DOT complaint P2 rated Specs: Configuration: driver side Passenger side: BA44FNR - sold separately Dimensions: 8-1/2" long x 3-1/4" wide Distance between mounting holes (center on center): 1-1/2" Bulb type: 194 Number of bulbs: 2 Power draw at 12.8V: 0.4 amps 3-Year warranty P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
3-7/8" x 1-1/4" Rectangle. Waterproof, 2-LED trailer marker light mounts on your trailer fender. Amber light faces front, and red light faces rear. Surface mount with bracket (sold separately). Accepts 1-prong or 2-prong plug. ... Features: Dual-face LED trailer light installs on your trailer fender Amber light faces front of trailer Red light faces rear of trailer Thinline Series has a low profile so that light can fit in tight spaces Sonically sealed, waterproof unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Red and amber lens over white LEDs Compatible with 12V DC electrical systems Surface mount with bracket (A65B - sold separately) Accepts industry standard 1-prong plug (A65P - sold separately) P2 rated Specs: Dimensions: 3-7/8" long x 1-1/4" wide x 7/8" thick Distance between mounting holes (center on center): 3" Diodes: 2 Power draw at 12.8V: 0.048 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Pre-wired fender light assembly mounts on top or side of your fender to mark the widest point on your trailer. The bracket has 1 amber front clearance light and 1 red rear clearance light. ... Features: Pre-wired LED light assembly mounts on fender to mark widest point of trailer Amber LED light points toward front of trailer to act as front clearance light Red LED light faces rearward to act as rear clearance light Long-lasting LEDs are great replacements for incandescent lights No bulbs to replace - no brittle filaments More efficient - provide brighter light with less power draw Sealed, polycarbonate lenses are waterproof Easy installation with durable, ABS plastic mounting bracket and housing Mounting screws not included 2-Wire design - includes ground wire and lead wire for power Department of Transportation compliant Meets FMVSS 108 and CMVSS requirements for automotive lighting Specs: Application: trailers over 80" wide Installs on left fender (driver's side) of trailer Housing dimensions: 1-5/8" wide x 4-3/4" long x 1-1/4" tall Diodes: 2 Power draw: 0.047 amps at 12.8 volts Lifetime warranty on LEDs 3-Year warranty on housing and wiring
Waterproof LED clearance/marker light installs on your driver's-side or passenger's-side trailer fender. Amber light faces front, and red light faces rear. Surface mount with ABS plastic base. 2-Wire pigtail.Features: Dual clearance light installs on your trailer fender Amber lens faces front of trailer Red lens faces rear of trailer Reversible assembly can be installed on either driver's-side or passenger's-side fender Sealed, waterproof unit includes durable, polycarbonate housing and UV-resistant lens Military-grade construction of circuit board Urethane potting offers better protection than common epoxy potting Premium LEDs are energy efficient, long-lasting, and vibration resistant Rated for up to 100,000 hours of operation Clear lens over red and amber LEDs Surface-mount installation - hardware not included Available cover (TN88XR) adds a protective case for the light 2-Wire pigtail White wire for ground Red wire for power Meets or exceeds FMVSS 108 standards Specs: Quantity: 1 fender light Dimensions: 1-1/2" long x 3/4" wide x 3/4" deep Distance between mounting holes (center on center): 1" Diodes: 2 Input voltage: 9V - 14V Power draw: 0.04 - 0.07 amps Wire length: 9" IP rated: 68 Limited lifetime warranty
Pre-wired fender light assembly mounts on top or side of your fender to mark the widest point on your trailer. The bracket has 1 amber front clearance light and 1 red rear clearance light. ... Features: Pre-wired LED light assembly mounts on fender to mark widest point of trailer Amber LED light points toward front of trailer to act as front clearance light Red LED light faces rearward to act as rear clearance light Long-lasting LEDs are great replacements for incandescent lights No bulbs to replace - no brittle filaments More efficient - provide brighter light with less power draw Sealed, polycarbonate lenses are waterproof Easy installation with durable, ABS plastic mounting bracket and housing Mounting screws not included 2-Wire design - includes ground wire and lead wire for power Department of Transportation compliant Meets FMVSS 108 and CMVSS requirements for automotive lighting Specs: Application: trailers over 80" wide Installs on right fender (passenger's side) of trailer Housing dimensions: 1-5/8" wide x 4-3/4" long x 1-1/4" tall Width including lights: 2-1/8" Diodes: 2 Power draw: 0.047 amps at 12.8 volts Lifetime warranty on LEDs 3-Year warranty on housing and wiring
Stylish mud flaps contour around your wheel wells to provide protection for your fenders from road debris. Polymer construction is more rigid and less likely to sail than rubber splash guards, but still flexible and forgiving.Features: Mud flaps shield your vehicle, towed cargo, and other cars from rocks, grime, and road debris Protects your boat, car, snowmobile, ATV, 5th-wheel trailer, or other towed gear Creates a barrier between your tires and wheel well to prevent mud, salt, and snow buildup Contours around your wheel well to provide more protection for your fenders Thermoflex is a durable polymer (hard plastic) that is highly flexible Won't break in strong winds or subfreezing temperatures Won't sail or flap like rubber material Black color helps hides dirt Bolt-on installation Made in the USA Specs: Quantity: 2 mud flaps Flap dimensions: 10" wide x 18" tall x 1/8" thick Fender Guard Mud Flaps These truck or trailer mud flaps are constructed of Thermoflex, a hard plastic that is both durable and flexible.
... Waterproof, incandescent trailer marker light mounts on your trailer fender. Amber light faces front, and red light faces rear. Mounts to trailer with bracket (sold separately). Accepts 1-prong or 2-prong plug. ... Features: Dual-face incandescent trailer light installs on your trailer fender Amber light faces front of trailer Red light faces rear of trailer Sonically sealed, waterproof unit is submersible Durable polycarbonate housing and lens Red and amber lens over incandescent bulbs Compatible with 12V DC systems Surface mount to trailer with bracket (A65PB or A67BB - sold separately) Accepts industry standard 1-prong plug (A65P - sold separately) P2 rated Specs: Dimensions: 3-15/16" wide x 1-1/4" tall x 7/8" thick Distance between mounting holes (center on center): 3" Bulb type: incandescent Power draw at 12.8V: 0.689 amps 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Peterson # M154A-R Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
3-15/16" x 1-1/4". Waterproof LED marker light can be installed on your trailer fender. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket (not included). Accepts 1-prong or 2-prong plug. ... Features: Dual-face LED trailer light installs on your trailer fender Thinline Series has a low profile so that light can fit in tight spaces Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Clear lens over red and amber LEDs Compatible with 12V DC systems Surface mount to trailer with bracket (A65B - sold separately) Accepts industry standard 1-prong or 2-prong plugs DOT compliant P2 Rated Specs: Dimensions: 3-15/16" long x 1-1/4" tall x 7/8" thick Diodes: 10 Power draw at 12.8 volts: 0.048 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Stylish mud flaps contour around your wheel wells to provide protection for your fenders from road debris. Polymer construction is more rigid and less likely to sail than rubber splash guards, but still flexible and forgiving.Features: Mud flaps shield your vehicle, towed cargo, and other cars from rocks, grime, and road debris Protects your boat, car, snowmobile, ATV, 5th-wheel trailer, or other towed gear Creates a barrier between your tires and wheel well to prevent mud, salt, and snow buildup Contours around your wheel well to provide more protection for your fenders Thermoflex is a durable polymer (hard plastic) that is highly flexible Won't break in strong winds or subfreezing temperatures Won't sail or flap like rubber material Black color helps hide dirt Bolt-on installation Made in the USA Specs: Quantity: 2 mud flaps Flap dimensions: 10-15/16" wide x 20" tall x 1/8" thick Fender Guard Mud Flaps These truck or trailer mud flaps are constructed of Thermoflex, a hard plastic that is both durable and flexible.
3-15/16" x 1-1/4". Waterproof LED marker light can be installed on your trailer fender. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. Hardwired with 1-prong plug. P2 rated.Features: Dual-face LED trailer light installs on your trailer fender Thinline Series has a low profile so that light can fit in tight spaces Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Red and amber lens over white LEDs Compatible with 12V DC systems Surface mount on trailer with included bracket Hardwired with industry standard 1-prong plug P2 rated Specs: Quantity: 1 fender light Dimensions with bracket: 4-1/16" long x 1-1/4" tall x 1-1/8" thick Light dimensions: 3-15/16" long x 1-1/4" tall x 7/8" thick Distance between mounting holes (center on center): 3" Diodes: 10 Power draw at 12.8V: 0.048 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Stylish mud flaps contour around your wheel wells to provide protection for your fenders from road debris. Polymer construction is more rigid and less likely to sail than rubber splash guards, but still flexible and forgiving.Features: Mud flaps shield your vehicle, towed cargo, and other cars from rocks, grime, and road debris Protects your boat, car, snowmobile, ATV, 5th-wheel trailer, or other towed gear Creates a barrier between your tires and wheel well to prevent mud, salt, and snow buildup Contours around your wheel well to provide more protection for your fenders Thermoflex is a durable polymer (hard plastic) that is highly flexible Won't break in strong winds or subfreezing temperatures Won't sail or flap like rubber material Black color helps hides dirt Bolt-on installation Made in the USA Specs: Quantity: 2 mud flaps Flap dimensions: 9" wide x 15" tall x 1/8" thick Fender Guard Mud Flaps These truck or trailer mud flaps are constructed of Thermoflex, a hard plastic that is both durable and flexible.
Stylish mud flaps contour around your wheel wells to provide protection for your fenders from road debris. Polymer construction is more rigid and less likely to sail than rubber splash guards, but still flexible and forgiving.Features: Mud flaps shield your vehicle, towed cargo, and other cars from rocks, grime, and road debris Protects your boat, car, snowmobile, ATV, 5th-wheel trailer, or other towed gear Creates a barrier between your tires and wheel well to prevent mud, salt, and snow buildup Contours around your wheel well to provide more protection for your fenders Thermoflex is a durable polymer (hard plastic) that is highly flexible Won't break in strong winds or subfreezing temperatures Won't sail or flap like rubber material White color is stylish and stands out Bolt-on installation Made in the USA Specs: Quantity: 2 mud flaps Flap dimensions: 12" wide x 37" tall x 1/8" thick Fender Guard Mud Flaps These truck or trailer mud flaps are constructed of Thermoflex, a hard plastic that is both durable and flexible.
Stylish mud flaps contour around your wheel wells to provide protection for your fenders from road debris. Polymer construction is more rigid and less likely to sail than rubber splash guards, but still flexible and forgiving.Features: Mud flaps shield your vehicle, towed cargo, and other cars from rocks, grime, and road debris Protects your boat, car, snowmobile, ATV, 5th-wheel trailer, or other towed gear Creates a barrier between your tires and wheel well to prevent mud, salt, and snow buildup Contours around your wheel well to provide more protection for your fenders Thermoflex is a durable polymer (hard plastic) that is highly flexible Won't break in strong winds or subfreezing temperatures Won't sail or flap like rubber material Black color helps hides dirt Bolt-on installation Made in the USA Specs: Quantity: 2 mud flaps Flap dimensions: 11-3/4" wide x 17-3/4" tall x 1/8" thick Fender Guard Mud Flaps These truck or trailer mud flaps are constructed of Thermoflex, a hard plastic that is both durable and flexible.
Filters
