Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
I went to the warehouse to measure the brackets of Curt hitch #C15801 and found it was approximately 8-1/2" from the top of the brackets to the top of the receiver tube (see accompanying photo). So the fit will depend on how much room there is…
view full answer...The Curt Class V hitch part #C15801 is a very high capacity hitch that has been confirmed as a fit for your 2016 Ram 3500 short bed. This hitch has a 2,700 lb tongue weight rating and a 20k lb trailer weight rating.
view full answer...Yes, you can remove/replace the factory hitch on your 2016 Ram 2500 with The Curt Trailer Hitch Receiver #C15801. If you want to keep the factory hitch on you can do that as well and use the factory hitch so you can carry a bike rack or other…
view full answer...To verify if you will be able to use the Brophy Hitch Reducer and Extender #HR26 as both an adapter and a reducer you will need to measure your current receiver. The hitch pin center hole to the weld on the tube is 1-1/2" and 9-1/2" from…
view full answer...Randy made a video, which I've posted below, where he went through the specs of the Furrion, Advent Air, and Atwood untis that we carry and came to the conclusion that Furrion was the overall best option so I definitely recommend the Furrion…
view full answer...The hitch opening location for the Torklift Hitch part #TLF1002-30 that you referenced will be very close to where you current hitch opening is. If the 28 extension part #TLE1528 would work well based on your current measurements it would be a great…
view full answer...I have a solution for you but the Buyers Products Hitch Plate with Receiver Tube - Chevy/GMC item #3371809065 will not fit your 2002 GMC W4500 Forward. You will need to use one of our universal hitches like the Draw-Tite Ultra Frame Service Body…
view full answer...I spoke with my contact at Ultra-Fab about the Power Twin II Electric Stabilizer, part #UF39-941705. They recommend not using this system because of the movement any livestock would make in the trailer. They said any movement would cause additional…
view full answer...I have another option for you, but the Trailer Connector Adapter w/ Lamp-Out Sensor Bypass - 7-Way RV to 7-Way RV - Vehicle End #20142 has built in resistors for vehicles with a lamp-out error and and since the lights are working properly when…
view full answer...To use the TorkLift SuperTruss Hitch Extension 48" Long item #TLE1548 with your 2023 Ford F-250 you are going to want the TorkLift SuperHitch Magnum Trailer Hitch Receiver item #TLF1008-30. This hitch is custom fit and bolts to your F-250 with…
view full answer...Yes, 14 gauge wire seems too small. I would go with 10 or 12 gauge. For 10 gauge you can use #10-1-1 and for 12 gauge use #12-1-1. These wires are sold in increments of 1 foot. So if you needed 20 feet of wire you would enter 20 in the quantity box.…
view full answer...We definitely have the needed plugs for your Peterson LumenX #M880-7. For the 3 wire, you will need the #A45PMB, and for the single pin, you will need the #PE58WR. These will get all the functions working properly.
view full answer...Filters
959 results
Vehicle Fit
Fit 2000 Jeep Wrangler