Hangers suspend leaf springs from the frame of your tandem-axle trailer. Designed to be used with either equalizer kit AP202 or AP216. Front hangers are 4-1/4" tall. Center hangers are 3-1/2" tall. Rear hangers are 5-1/4" tall.Features: Attach 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location (when used with AP202 or AP216) based on type of leaf springs Achieve 4-3/4", 5" or 5-1/4" clearance between trailer frame and axle, depending on axle size Include: (2) 4-1/4" Tall front hangers (28-1) (2) 3-1/2" Tall center hangers (29-1) (2) 5-1/4" Tall rear hangers (30-28) Use in conjunction with either AP202 or AP216 for complete kit AP202 and AP216 contain equalizers, bolts and shackle straps Designed for use on trailers with tandem, 3,500-lb to 8,000-lb axles Does not include components for mounting axle to springs When used with AP202: Leaf Springs A - Distance Between Front and Center Hangers B - Distance Between Center and Rear Hangers C - Distance Between U-Bolts D - Distance Between Center of Axle and Trailer Frame Axle Diameter 803T3, 1203T3, 1403T3 28-3/4" 28-3/4" 33-1/2" 5-1/4" 3" (typical 5,200-lb to 7,200-lb trailer axle) E5226 29-3/4" 29-3/4" 34-1/2" 5" 3" (typical 5,200-lb to 7,200-lb trailer axle) E5115 32-1/2" 32-1/2" 36-3/4" 4-3/4" 3" (typical 5,200-lb to 7,200-lb trailer axle) When used with AP216: Leaf Springs A - Distance Between Front and Center Hangers B - Distance Between Center and Rear Hangers C - Distance Between U-Bolts D - Distance Between Center of Axle and Trailer Frame Axle Diameter 803T3, 1203T3, 1403T3 30-1/2" 30-1/2" 36" 5" 3" (typical 5,200-lb to 7,200-lb trailer axle) E5226 31-1/2" 31-1/2" 37" 5" 3" (typical 5,200-lb to 7,200-lb trailer axle) E5115 33-3/4" 33-3/4" 39" 5" 3" (typical 5,200-lb to 7,200-lb trailer axle)
Leaf-spring mounting kit includes 3-9/16" tall front hangers, 3-11/16" tall center hangers, 5-1/16" tall rear hangers and necessary hardware. Equalizers are 12" long. Components for mounting axle to springs sold separately.Features: Attaches 6 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location based on type of leaf springs Achieves 4-3/4" clearance between trailer frame and axle, depending on axle size Includes: (2) 3-9/16" Tall front hangers (721584) (4) 3-11/16" Tall center hangers (721586) (2) 5-1/16" Tall rear hangers (721585) (4) 12" Long straight equalizers (E5541) 7/8" Diameter center hole for mounting to hanger 9/16" Diameter side hole for attaching to spring (12) 3-1/2" Long x 9/16" diameter shackle bolts (91635B) (12) 9/16" Diameter locknuts (916DLN) (4) 4-11/16" Long x 7/8" diameter equalizer bolts (7845B) (4) 7/8" Diameter castle nuts for 7845B (78CN) (4) 2-1/4" Long cotter pins for 7845B (165649) Designed for use on trailers with triple, 3,500-lb to 8,000-lb axles Does not include components for mounting axle to springs Leaf Springs A - Distance Between Front and 1st-Center Hangers B - Distance Between Center Hangers C - Distance Between 2nd-Center and Rear Hangers D - Distance Between U-Bolts E - Distance Between Center of Axle and Trailer Frame Axle Diameter SP-230275 (803T3) SP-232275 (1203T3) SP-285275 (1403T3) 29" 33-1/2" 29" 33-1/2" 4-3/4" 3" (typical 5,200-lb to 7,200-lb trailer axle) SP-160275 (E5226) 29-1/2" 34" 29-1/2" 34" 4-3/4" 3" (typical 5,200-lb to 7,200-lb trailer axle) SP-161275 (E5115) 32" 36-1/2" 32" 36-3/4" 4-3/4" 3" (typical 5,200-lb to 7,200-lb trailer axle)
Leaf-spring mounting kit includes 3-3/4" tall front hangers, 3-3/8" tall center hangers, 5-1/6" tall rear hangers, and necessary hardware. Equalizers are 12" long. Components for mounting axle to springs sold separately.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location based on type of leaf springs Achieves 4-1/2" or 4-3/4" clearance between trailer frame and axle, depending on axle size Includes: (2) 3-3/4" Tall front hangers (2) 3-3/8" Tall center hangers (2) 5-1/6" Tall rear hangers (2) 12" Long straight equalizers 7/8" Diameter center hole for mounting to hanger 9/16" Diameter side hole for attaching to spring (8) 3-1/2" Long x 9/16" diameter shackle bolts (8) 9/16" Diameter locknuts (2) 4-11/16" Long x 7/8" diameter equalizer bolts (2) 7/8" Diameter castle nuts (2) 2-1/4" Long cotter pins Designed for use on trailers with tandem, 3,500-lb to 8,000-lb axles Does not include components for mounting axle to springs Leaf Springs A - Distance Between Front and Center Hangers B - Distance Between Center and Rear Hangers C - Distance Between U-Bolts D - Distance Between Center of Axle and Trailer Frame Axle Diameter SP-160275 (E5226) 29-3/4" 29-3/4" 34-1/2" 4-3/4" 3" (typical 5,200-lb to 7,200-lb trailer axle) SP-230275 (803T3) SP-232275 (1203T3) SP-285275 (1403T3) 28-1/2" 29-1/2" 33" 4-1/2" 3" (typical 5,200-lb to 7,200-lb trailer axle) SP-161275 (E5115) 32" 32" 36-3/4" 4-3/4" 3" (typical 5,200-lb to 7,200-lb trailer axle) Note: The above table provides an indication of where the included hangers can be mounted on your trailer.
Kit includes 3-3/4" tall front hangers, 5-1/6" tall rear hangers and hardware for mounting 2" springs to your 2,000-lb to 8,000-lb, single-axle trailer frame. Components for mounting axle to springs sold separately.Features: Attaches 2 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location based on type of leaf springs Achieves 4-3/4" or 5" clearance between trailer frame and axle, depending on axle size Includes: (2) 3-3/4" Tall front hangers (2) 5-1/6" Tall rear hangers (4) 3-1/2" Long x 9/16" diameter shackle bolts (4) 9/16" Diameter locknuts Designed for use on trailers with single, 2,000-lb to 8,000-lb axles Does not include components for mounting axle to springs Leaf Springs A - Distance Between Hangers B - Distance Between Center of Axle and Trailer Frame Axle Diameter SP-230275 (803T3) SP-232275 (1203T3) SP-285275 (1403T3) 25" 4-3/4" 3" (typical 5,200-lb to 7,200-lb trailer axle) SP-160275 (E5226) 26" 5" 3" (typical 5,200-lb to 7,200-lb trailer axle) SP-161275 (E5115) 28" 5" 3" (typical 5,200-lb to 7,200-lb trailer axle) Note: The above table provides an indication of where the included hangers can be mounted on your trailer.
Leaf-spring mounting kit includes 4-1/2" tall front hangers, 3-1/2" tall center hangers, 5-1/4" tall rear hangers and necessary hardware. Equalizers are 13-1/8" long. Components for mounting axle to springs sold separately.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location based on type of leaf springs Achieves 5" clearance between trailer frame and axle, depending on axle size Includes: (2) 4-1/2" Tall front hangers (28-1) (2) 3-1/2" Tall center hangers (29-1) (2) 5-1/4" Tall rear hangers (30-28) (2) 13-1/8" Long straight equalizers (13-44) 7/8" Diameter center hole for mounting to hanger 9/16" Diameter side hole for attaching to spring (4) 3-1/4" Long x 5/16" diameter spring keeper bolts (7-7) (4) 5/16" Diameter locknuts (6-11) (4) 3-1/2" Long x 9/16" diameter shackle bolts (91635B) (4) 9/16" Diameter locknuts (916DLN) (2) 4-1/2" Long x 7/8" diameter wet equalizer bolts (7-1-1) (2) 7/8" Diameter locknuts for 7-1-1 (6-111) Designed for use on trailers with tandem, 3,500-lb to 8,000-lb axles Does not include components for mounting axle to springs Leaf Springs A - Distance Between Front and Center Hangers B - Distance Between Center and Rear Hangers C - Distance Between U-Bolts D - Distance Between Center of Axle and Trailer Frame Axle Diameter SP-230275 (803T3) SP-232275 (1203T3) SP-285275 (1403T3) 30-1/2" 30-1/2" 36" 5" 3" (typical 5,200-lb to 7,200-lb trailer axle) SP-160275 (E5226) 31-1/2" 31-1/2" 37" 5" 3" (typical 5,200-lb to 7,200-lb trailer axle) SP-161275 (E5115) 33-3/4" 33-3/4" 39" 5" 3" (typical 5,200-lb to 7,200-lb trailer axle)
Hey Justin, thanks for reaching out, and good question. The Curt Double Lock #C60712 and Curt EZr Double Lock #C619-648 are extremely similar. The #C60607 Double Lock is the older, more traditional design. It still uses the same double-lock ball…
It may be possible to change your studs from 1/2" to 9/16" so long as the studs are drive-in (as opposed to threaded); also, the length and knurl diameter needs to be the same. For example, the Kodiak Wheel Bolt - 9/16" Diameter x…
There are actually a couple differences between the Curt EZr #C619-648 and the Double Lock #C60712. The visible one will be that the safety chains on the #C60712 are not centered like the ones on the #C619-648. The difference that is not visible is…
From a function point of view there isn't a huge difference between the two Curt gooseneck hitches #C60712 and #C619-648. You might notice that the EZR has a smaller plate that has larger u-bolts for safety chains and the Double Lock has smaller…
Though I may have an option for you, I was also unable to find any info on the T-23972 seal you currently have. With that being said, the Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2 #RG06-050, or #58846 as…
For a Bulldog 180 series jack you will need replacement drop leg pin #BD500177. It includes the spring, cotter pin, and washer. You should not have to remove the inner drop leg to replace the pin and spring. Start by pulling back on the pin. Then use…
The return spring inside the Bulldog Square Jacks like part #BD182800 are neither replaceable nor repairable according to Bulldog. Therefore, so you will have to replace the entire jack if yours is broken or damaged.
The standard torque on a Redline Trailer Wheel Lug Nut - 9/16 inch, part #6-53, is 135 to 145 ft lbs. This is the torque range that is normally used. If the instructions for the wheel are saying 110 ft lbs there might be a reason, like the wheel…
Hi Bryan, It looks like the Sienna doesn't come with a plug-and-play connector for wiring in a brake controller so you will have to do a bit of splicing but it's honestly a lot easier than you'd think. In order to tow a trailer with…
Yes, there is a difference between an oil seal and a grease seal for trailer hubs. Oil seals have a much tighter fit on the spindle to keep the oil from leaking out. An oil seal can be used with grease but a grease seal cannot be used with oil. The…
You can use bearing protectors on a hub with electric brakes. You have to make sure you are using a double lip seal though because a single lip seal is more likely to blow and allow grease to leak out and get all over the hub and brake components.…
Brake controllers are not vehicle specific so you can install the P2 #90885 or P3 #90195 or any controller in your 2004 Toyota Highlander. Brake controller power output can be adjusted to as long as you do not set the controller too aggressively it…
Leaf-spring mounting kit includes 4-1/4" tall front hangers, 3-1/2" tall center hangers, 5-1/4" tall rear hangers and necessary hardware. Equalizers are 10-1/8" long. Components for mounting axle to springs sold separately.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location based on type of leaf springs Achieves 4-3/4", 5" or 5-1/4" clearance between trailer frame and axle, depending on axle size Includes: (2) 4-1/4" Tall front hangers (28-1) (2) 3-1/2" Tall center hangers (29-1) (2) 5-1/4" Tall rear hangers (30-28) (2) 10-1/8" Long swan-shaped equalizers (13-4) 7/8" Diameter center hole for mounting to hanger 9/16" Diameter side hole for attaching to spring (4) 3-1/4" Long x 5/16" diameter spring keeper bolts (7-7) (4) 5/16" Diameter locknuts (6-11) (4) 3-1/2" Long x 9/16" diameter shackle bolts (91635B) (4) 9/16" Diameter locknuts (916DLN) (2) 4-1/2" Long x 7/8" diameter wet equalizer bolts (7-1-1) (2) 7/8" Diameter locknut for 7-1-1 (6-111) Designed for use on trailers with tandem, 3,500-lb to 8,000-lb axles Does not include components for mounting axle to springs Leaf Springs A - Distance Between Front and Center Hangers B - Distance Between Center and Rear Hangers C - Distance Between U-Bolts D - Distance Between Center of Axle and Trailer Frame Axle Diameter SP-230275 (803T3) SP-232275 (1203T3) SP-285275 (1403T3) 28-3/4" 28-3/4" 33-1/2" 5-1/4" 3" (typical 5,200-lb to 7,200-lb trailer axle) SP-160275 (E5226) 29-3/4" 29-3/4" 34-1/2" 5" 3" (typical 5,200-lb to 7,200-lb trailer axle) SP-161275 (E5115) 32-1/2" 32-1/2" 36-3/4" 4-3/4" 3" (typical 5,200-lb to 7,200-lb trailer axle)
Leaf-spring mounting hangers include 4-1/4" tall front hangers, 3-1/2" tall center hangers, and 5-1/4" tall rear hangers. Equalizers, shackle straps, bolts, and components for mounting axle to springs sold separately.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location based on type of leaf springs Achieves 4-3/4", 5" or 5-1/4" clearance between trailer frame and axle, depending on axle size Includes: (2) 4-1/4" Tall front hangers (028-001-00) (2) 3-1/2" Tall center hangers (029-001-00) (2) 5-1/4" Tall rear hangers (030-028-00) Designed for use on trailers with tandem, 3,500-lb to 8,000-lb axles Equalizers, shackle straps, bolts, and components for mounting axle to springs sold separately Leaf Springs A - Distance Between Front and Center Hangers B - Distance Between Center and Rear Hangers C - Distance Between U-Bolts D - Distance Between Center of Axle and Trailer Frame Axle Diameter SP-230275 (803T3) SP-232275 (1203T3) SP-285275 (1403T3) 28-3/4" 28-3/4" 33-1/2" 5-1/4" 3" (typical 5,200-lb to 7,200-lb trailer axle) SP-160275 (E5226) 29-3/4" 29-3/4" 34-1/2" 5" 3" (typical 5,200-lb to 7,200-lb trailer axle) SP-161275 (E5115) 32-1/2" 32-1/2" 36-3/4" 4-3/4" 3" (typical 5,200-lb to 7,200-lb trailer axle)
Slipper leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 6,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.
Slipper leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 7,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushing with 9/16" inner diameter.
Filters
