This heavy-duty cargo strap has Etrack fittings at either end that secure to Snap-Loc or Etrack anchor points. A loop at one end serves as a soft tie for bikes, and the ratchet makes it easy to tighten down the strap. 3,000 lbs Max load.Use this heavy-duty ratchet strap to help secure your cargo. Each end of the logistics strap has an ETrack fitting that connects to a Snap-Loc single-slot anchor or to any other ETrack anchor point, and the sewn-in soft loop can be used as a tie-down for your bike or motorcycle handlebars.
This heavy-duty cargo strap has Etrack fittings at either end that secure to Snap-Loc or Etrack anchor points. A loop at one end acts as a soft tie for bikes, and the ratchet makes it easy to tighten the strap. 4,400 lbs Max load.Each end of the logistics strap has an ETrack fitting that connects to a Snap-Loc single-slot anchor or to any other ETrack anchor point, and the sewn-in soft loop can be used as a tie-down for your bike or motorcycle handlebars.
These ratcheting tire straps secure 2 tires to your floor-mounted Etrack. The roller idlers allow the straps to fit snug over the tires, and swivel to keep the straps from bunching up if the angles are offset from your Etrack. 3,300 lbs Max load.Features: Tire straps let you use the floor-mounted Etracks on your trailer to secure 2 of your vehicle's tires Perfect for transporting a low-profile car, motorcycle, or ATV Large ratchet handles tighten and maintain tension on the straps Release levers disengage the ratchets when you're ready to unload Roller idlers create anchor points at the base of the tires, so the ratchet straps fits snug Swivel to align straps if the angles are offset from your Etracks - prevent bunching up Allow ratchets to sit away from tires - no more crawling under vehicle to tighten straps Rubber blocks prevent the straps from sliding off your tires Spring-loaded fittings let you easily move straps from one Etrack slot to another High-visibility polyester webbing is strong and won't stretch or tear Zinc-plated steel ratchets, idlers, and fittings are rust resistant Specs: Application: floor-mounted Etrack and X track Strap dimensions: 2" wide x 12' long Safe working load limit (WLL): 1,100 lbs each Maximum load (break strength): 3,300 lbs each Quantity: 2 tie-down straps and idlers 1-Year warranty Note: Tie-down straps and their accessories must be chosen according to their safe working load limit (WLL).
These ratcheting tire straps come with roller idlers, which allow you to move the ratchets away from the vehicle so it is easier to tighten down the straps. The spring-loaded fittings on straps and rollers clip into Etrack slots. 3,300 lbs Max load.Features: Etrack tire straps with roller idlers let you secure a vehicle to your trailer Roller idler allows you to move ratchet away from vehicle so it's easier to operate No need to crawl under vehicle to tighten ratchet Positions at base of tire to serve as third anchor point for strap Helps keep tension on strap Ratchet straps secure tire in place Sturdy ratchet helps you achieve and maintain maximum tension on the strap Release lever disengages the ratchet when you're ready to unload Spring-loaded fittings on strap ends and roller idlers snap into Etrack (sold separately) anchor slots Yellow carry bag included for storage and transportation Durable polyester strap webbing is abrasion resistant Zinc-coated steel roller idlers and ratchets are rust resistant Specs: Strap dimensions: 2" wide x 12' long Safe working load limit (WLL): 1,333 lbs Maximum load (break strength): 3,300 lbs Quantity: 2 ratchet straps with roller idlers 1-Year warranty
This heavy-duty O-ring tie-down anchor is perfect for securing a small car, UTV, or other large objects to the Etrack in your trailer or garage. It provides an attachment point for a ratchet strap, rope, chain, or bungee cord. 6,000 lbs Max load.Features: Heavy-duty O-ring provides an anchor point for securing a small car, UTV, or other large objects to your Etrack Perfect for attaching a ratchet strap, rope, chain, or bungee cord Spring-loaded fitting lets you easily move ring from one Etrack slot to another Zinc-plated steel is rust resistant Specs: Application: horizontal and vertical Etrack and X track Interior ring diameter: 1-1/2" Safe working load limit (WLL): 2,000 lbs Maximum load (break strength): 6,000 lbs 1-Year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This ratcheting tire strap secures 1 tire to your floor-mounted Etrack. The roller idler allows the strap to fit snug over the tire, and swivels to keep the strap from bunching up if the angle is offset from your Etrack. 4,000 lbs Max load.Features: Tire strap lets you use the floor-mounted Etrack on your trailer to secure 1 of your vehicle's tires Perfect for transporting a low-profile car, motorcycle, or ATV Large ratchet handle tightens and maintains tension on the strap Release lever disengages the ratchet when you're ready to unload Roller idler creates an anchor point at the base of the tire, so the ratchet strap fits snug Swivels to align strap if the angle is offset from your Etrack - prevents bunching up Allows ratchet to sit away from tire - no more crawling under vehicle to tighten strap Rubber blocks prevent the strap from sliding off your tire Spring-loaded fittings let you easily move strap from one Etrack slot to another High-visibility polyester webbing is strong and won't stretch or tear Zinc-plated steel ratchet, idler, and fitting are rust resistant Specs: Application: floor-mounted Etrack and X track Strap dimensions: 2" wide x 12' long Safe working load limit (WLL): 1,333 lbs Maximum load (break strength): 4,000 lbs Quantity: 1 tie-down strap and idler 1-Year warranty Note: Tie-down straps and their accessories must be chosen according to their safe working load limit (WLL).
This O-ring tie-down anchor is perfect for securing an ATV, generator, or other large object to the Etrack in your trailer or garage. It provides an attachment point for a ratchet strap, rope, chain, or bungee cord. 4,000 lbs Max load.Features: O-ring provides an anchor point for securing an ATV, generator, or other large object to your Etrack Perfect for attaching a ratchet strap, rope, chain, or bungee cord Spring-loaded fitting lets you easily move ring from one Etrack slot to another Zinc-plated steel is rust resistant Specs: Application: horizontal and vertical Etrack and X track Interior ring diameter: 1-7/8" Safe Working Load Limit: 1,333 lbs Maximum load (break strength): 4,000 lbs 1-Year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Tie-down kit has 4 ratcheting tire straps and 2 moveable wheel chocks for securing your wheeled equipment to your truck bed or trailer. ... The other end of the strap is then clipped into the ETrack. You should now have plenty of room to operate the ratchet and tighten down the strap.
Tie-down kit has 2 ratcheting tire straps and 2 moveable wheel chocks for securing your wheeled equipment to your truck bed or trailer. ... The other end of the strap is then clipped into the ETrack. You should now have plenty of room to operate the ratchet and tighten down the strap.
Tie-down kit secures your ATV or other wheeled equipment to your trailer. The ratchet straps have Etrack fittings that clip into the anchor slots on the wheel chocks. ... Features: Tie-down kit secures your ATV, lawn mower, or other wheeled equipment in your trailer Wheel chocks and ratchet tie-down straps included for 4 wheels Wheel chocks with Etrack slots permanently install in the bed of your trailer Chocks are positioned in front and behind wheels to stabilize equipment 2 Anchor slots on each chock to accommodate wheels of different sizes Ratchet straps have Etrack fittings that snap into anchor slots on chocks Sturdy ratchets help achieve maximum tension on the straps Release lever disengages each ratchet when you're ready to unload Strong polyester strap webbing Rust-resistant powder coating on wheel chocks Easy, bolt-on installation Mounting hardware not included Specs: Fits: tires from 10" to 30" in diameter Strap dimensions: 2" wide x 7-1/2' long Maximum load (break strength): 4,500 lbs Safe working load limit (WLL): 1,500 lbs Note: Tie-down straps must be chosen according to their safe working load limit (WLL).
This logistics strap is equipped with steel ends that fit into vertical or horizontal Etracks installed in enclosed cargo trailers. Ratcheting buckle tightens and locks strap in place to secure whatever you are carrying. 3,000 lbs Max load.Features: 2-Piece polyester strap attaches to Etrack systems to secure loads to the walls or floor inside your trailer Ratchet tightens strap to secure your cargo in place Short end with the ratchet is 4' long Specs: Strap dimensions: 2" wide x 12' long Safe working load limit (WLL): 1,000 lbs Maximum load (break strength): 3,000 lbs 1-Year limited warranty
This ring connects quickly to a Snap-Loc or any etrack so that you can attach ropes, hooks or standard straps to any etracktie-down point. The spring-loaded attachment point lets you install and remove the ring with just the pull of a lever.Features: Adds a tie-down ring to your Snap-Loc anchor point or to any standard etrack Allows you to use ropes or hooks (sold separately) to help secure your cargo Spring loaded for secure fit and easy removal Pull back on lever to fit the Loc-Ring into the etrack and then release the lever to secure Dimensions: Base height: 3" Ring width: 2-1/18" Capacity: 3,000 lbs Safe working load limit: 1,000 lbs 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This tie-down anchor is perfect for securing boxes, pallets, or other large objects to the Etrack in your trailer or garage. The pre-drilled 3/8" hole lets you attach a bungee cord, ratchet strap, or carabiner.Features: Tie-down anchor provides an attachment point for securing boxes, pallets, or other large objects to your Etrack Pre-drilled hole lets you attach a bungee cord, ratchet strap, or carabiner Spring-loaded fitting lets you easily move anchor from one Etrack slot to another Zinc-plated steel is rust resistant Specs: Application: horizontal and vertical Etrack and X track Anchor hole diameter: 3/8" Safe working load limit (WLL): 1,333 lbs Maximum load (break strength): 4,000 lbs 1-Year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Features: Trailer Etrack Round Heavy Duty D-Ring 6,000-lb Capacity Safe Working Load Limit: 2,000 lbs Compatible with horizontal or vertical Etrack Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This ratcheting tire strap comes with a roller idler, which allows you to move the ratchet away from the vehicle so it is easier to tighten down the strap. The spring-loaded fittings on strap and roller clip into E-track slots. 3,300 lbs Max load.The other end of the strap is then clipped into the E-track. You should now have plenty of room to operate the ratchet and tigten down the strap.
This 360-degree swivel anchor serves as a versatile etracktie-down point in your truck bed or trailer. Mount on the floor or wall and the rotating center makes it easy to keep straps straight. ... Features: Anchor ring provides an etracktie-down point in your truck bed or trailer Steel support plate included for added strength Bright zinc finish Specs: Load capacity: 2,000 lbs Quantity: 1 anchor ring
This logistics strap is equipped with steel ends that fit into vertical or horizontal Etracks installed in enclosed cargo trailers. Ratcheting buckle tightens and locks strap in place to secure whatever you are carrying. 3,000 lbs Max load.Features: 2-Piece polyester strap attaches to Etrack systems to secure loads to the walls or floor inside your trailer Ratchet tightens strap to secure your cargo in place Short end with the ratchet is 4' long Specs: Strap dimensions: 2" wide x 16' long Safe working load limit (WLL): 1,333 lbs Maximum load (break strength): 3,000 lbs 1-Year limited warranty
Attaches anywhere along Etrack to provide a tie-down point where you need it. Push-button design makes it easy to move and secure.Features: Tie-off Ring Color may vary Not compatible with Snap-Loc EtrackTie-Down Anchors Specs: 4,000 lbs Capacity Safe Working Load Limit: 1,333 lbs Ring dimensions: 1/4" thick x 1-7/8" inner diameter Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Create a tie-down point for securing a cargo strap, rope, net, or tarp by snapping this fitting into your etrack anchor or rail. Steel attachment point and polyester strap are durable. 1,000-lb Load limit.Features: Creates a tie-down point in your trailer for rope, cargo straps, net, or tarps Clips easily into an etrack anchor or rail (sold separately) Constructed of durable steel and polyester webbing Specs: Overall dimensions: 6" long x 2" wide Safe working load limit (WLL): 1,000 lbs 1-Year limited warranty
This zinc-plated Etrack link allows you to join 2 Etrack straps or connect a single strap to itself to create a loop. Connecting the straps helps you to safely control large, awkward cargo.Features: Joins 2 Etrack straps or lets you connect a single strap to itself (straps sold separately) Zinc plated to resist corrosion Made in the USA Specs: Dimensions: 4-3/4" long x 1" wide x 1-1/8" tall Break strength: 4,000 lbs Working load limit: 1,000 lbs Limited lifetime warranty
Add a tie-down point to your truck or trailer with a Snap-Loc Etrack anchor. Made of 2.5-mm stainless steel, the low-profile tie-down anchor stands up to harsh weather, road chemicals and marine use. ... The streamlined fit also keeps the anchor out of your way when it's not in use. And if you need a recessed tie-down point, this single ETrack anchor can be installed upside down - your ETrack accessories will still lock into it securely. The single-slot anchor also gives you a cleaner look for a more economical price than heavier 2' or 6' long ETrack sections.
Add a tie-down point to your truck or trailer with a Snap-Loc Etrack anchor. Made of 3.5-mm steel, this low-profile tie-down anchor has a zinc finish to resist corrosion. ... The streamlined fit also keeps the anchor out of your way when it's not in use. And if you need a recessed tie-down point, this single ETrack anchor can be installed upside down - your ETrack accessories will still lock into it securely. The single-slot anchor also gives you a cleaner look for a more economical price than heavier 2' or 6' long ETrack sections.
Filters
