Rust-resistant disc brakekit is great for boat trailers. Includes 2 KodaGuard-plated calipers; 2 Dacromet-plated, slip-on rotors and brackets; and 4 stainless steel caliper mounting bolts. ... Disc brakes deliver consistent braking - even at highway speeds - unlike drum brakes, which often show a substantial drop in braking torque at higher speeds.
Get 6 super rust-resistant hub-rotor assemblies - complete with inner (25580) and outer (14125A) bearings - and an electric-over-hydraulic actuator that works with your existing brake controller for stellar performance. Includes lines and fittings.All-in-one Brake Replacement DeeMaxx's integral brakekits combine the brake hub and rotor into a single cast iron piece. Unlike a slip-on assembly, the 1-piece setup makes installation easier because the hub and the rotor are combined .
Upgrade to disc brakes with 6 super rust-resistant slip-on rotors and an electric-over-hydraulic actuator that works with your existing brake controller, and get outstanding braking performance. ... The same is true for the slip-on rotors in this kit. DeeMaxx also has simple instructions for bleeding the brakes laser-etched on the back of the calipers. This convenient time saver means you'll always have the guidance you need on hand when the time comes for maintenance.
Rust-resistant disc brakekit is great for boat trailers. Includes 2 KodaGuard-plated calipers; 2 Dacromet-plated, slip-on rotors and brackets; and stainless steel caliper mounting bolts. ... Disc brakes deliver consistent braking - even at highway speeds - unlike drum brakes, which often show a substantial drop in braking torque at higher speeds.
This kit includes everything you need to upgrade your triple-axle boat trailer or camper to disc brakes for improved performance and greater stopping power. ... All-in-one Brake Replacement DeeMaxx's integral brakekits combine the brake hub and rotor into a single cast iron piece. Unlike a slip-on assembly, the one-piece setup makes installation easier since the hub and the rotor are combined .
Complete single-axle disc brake set offers better performance and increased stopping power for your trailer. Includes 2 hub-and-rotor assemblies, 2 calipers and 2 mounting brackets, all Dacromet-plated for superior corrosion resistance.Performance increases as well. Disc brakes deliver consistent braking even at highway speeds, unlike drum brakes, which often show a substantial drop in braking torque at higher speeds.
Replace your hubs with these rust-resistant hub-rotor assemblies to get safer, more consistent braking. Maxx coating is even better than Dacromet, making this kit perfect for your boat trailer. Includes inner (25580) and outer (14125A) bearings.This particular kit can save you time and money over other disc brakes on the market as well. A slip-on rotor may be easier to install initially, but water can find its way between the rotor and your existing hub, causing uneven rotor wear or runout.
Kit includes everything you need to switch your trailer over to disc brakes for improved performance and greater stopping power. Dacromet-coated brakes are corrosion resistant. ... Features: All-inclusive kit has everything you need to switch your trailer over to disc brakes 4 Disc brake end kits Hub-and-rotor assemblies Grease seals, races and bearings Grease caps (F001526) available separately Calipers with mounting brackets and hardware - attach to 5-bolt brake flanges Hydrastar electric-over-hydraulic brake actuator Hardwires into tow vehicle and signals in-cab brake controller when brakes are applied, triggering pump and motor on actuator Creates smooth, even braking with fast response time Works with most in-cab brake controllers (sold separately) Line kit with brake lines and fittings for tandem-axle trailers Disc brakes deliver better performance Consistent stopping even at highway speeds Shorter stopping distance than most drum brakes Trailer coupler not included Specs: Axle capacity: 7,000 lbs Bolt pattern: 8 on 6-1/2" Rotor diameter: 13" Wheel stud diameter: 1/2" Warranty: Actuator: 2 years Brakes and components: 1 year Bearings, Race, and Seal Information: Bearings Inner bearing 25580 Outer bearing: 14125A Races Inner race: 25520 Outer race: 14276 Seal: GS-2250DL Inner diameter: 2.250" Outer diameter: 3.376" Complete Kit Includes: Hydrastar electric-over-hydraulic trailer brake actuator 7K disc brakekit including hub-and-rotor assemblies with bearings, races, and seals Hydraulic tandem-axle brake line kit (1) 15' Long brake line with 3/8"-24 inverted flare nuts (1) 6' Long brake line with 3/8"-24 inverted flare nuts (2) 4-1/4' Long brake lines with 3/8"-24 inverted flare nuts (4) 18" Male/male rubber flex lines (1) 3/16" Brass T-fitting (2) 3/16" Brass union fittings (1) 3/16" Brass X-fitting 1/2" Nylon hose clamps 3/16" Nylon hose clamps Self-tapping screws Disc Brakes More and more people are switching their trailers over to disc brakes, and with good reason.
Two brakes fit 6,000-lb E-Z Lube axles with 15" to 16-1/2" wheels. E-coat finish on hubs, rotors, calipers, and brackets resists corrosion. ... Features: Trailer brake assemblies make it easy to upgrade from drum brakes to disc brakes for better performance More consistent stopping, even at highway speeds Dramatically shorter stopping distance Easier and less expensive to maintain E-coat finish provides corrosion resistance for freshwater and limited saltwater use Vented rotors help to regulate temperature to prevent overheating Included hubs replace your existing hubs Self-adjusting calipers ensure maximum surface contact for smooth, equal braking Semi-metallic brake pads resist heat and provide excellent grip Grease caps feature removable plugs for easy access to grease zerks on E-Z Lube axle Ductile iron mounting brackets provide strength and durability Weld-on flanges sold separately Kit includes 2 full brake assemblies for 1 axle 2 E-coated rotors 2 E-coated hubs with bolts pressed in 2 E-coated ductile iron calipers 4 Semi-metallic brake pads 2 E-coated caliper mounting brackets with bolts and nuts Bearings, races, grease seals, and E-Z Lube grease caps Thread sealant Hydraulic brake actuator and lines (sold separately) are required for brakes to be activated Requires psi rating of at least 1,600 Made in the USA Specs: Fits: Axle capacity: 6,000 lbs Wheel size: 15", 16", and 16-1/2" Bolt pattern: 6 on 5-1/2" Wheel bolt diameter: 1/2" Rotor diameter: 12" Brake flange configuration: 5 bolt 5-Year limited warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 15123 (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 15245 Grease seal (included): GS-2250DL Inner diameter: 2.25" Outer diameter: 3.376"
Rust-resistant disc brakekit is great for boat trailers. Includes 2 KodaGuard-plated calipers, 2 Dacromet-plated hub-rotor assemblies and brackets, 4 stainless steel caliper mounting bolts, and inner and outer races. ... Disc brakes deliver consistent braking - even at highway speeds - unlike drum brakes, which often show a substantial drop in braking torque at higher speeds.
Rust-resistant disc brakekit is great for boat trailers. Includes 2 KodaGuard-plated calipers, 2 Dacromet-plated hub rotor assemblies and brackets, 4 stainless steel caliper mounting bolts, and inner and outer races. ... Disc brakes deliver consistent braking - even at highway speeds - unlike drum brakes, which often show a substantial drop in braking torque at higher speeds.
Replaces 1 rotor spacer for your Kodiak 12,000-lb disc brakekit (2/R-11-12D-HD-REER). Fits the left or right side.Features: Replaces 1 rotor spacer for your Kodiak 12K disc brakekit (2/R-11-12D-HD-REER) Fits the driver or passenger side
Great for coastal or snowy areas, these Dacromet-coated disc brakes offer a safe ride. Short stopping distances and consistent braking keep your trailer from pushing and pulling. Includes inner (L68149) and outer (L44649) bearings.This particular kit can save you time and money over other disc brakes on the market as well. A slip-on rotor may be easier to install initially, but water can find its way between the rotor and your existing hub, causing uneven rotor wear or runout.
Trust in faster braking response and improved control for your 5th wheel, horse, or work trailer. Works with from-the-factory electric brake controllers, so you won't need an extra adapter.Features: Activates the hydraulic disc system when you apply the brakes in your vehicle Reaches 1,000 psi in just 3/16 of a second Made to last and protect key components for everyday reliability Stout, extruded aluminum housing minimizes heat Upgraded gaskets and isolated, sealed fluid tank eliminate risk of contamination Powerful DC motor and German-made pump Installs on your trailer frame or in an enclosed compartment Rotating, 90-degree brake line fitting allows for any mounting position Meets DOT specifications Requires components that are sold separately: EOH-compatible factory or aftermarket trailer brake controller DOT required battery-powered breakaway device with switch 7-Way trailer connector to send wired signal Mounting hardware, wires/connectors, and hydraulic lines/fittings Specs: Application: for single-, tandem-, or triple-axle trailers with disc brakes Maximum output pressure: 1,600 psi Dimensions: 10" long x 3-5/8" wide x 6" tall Mounting holes center-to-center: 10-7/8" long x 1-5/8" wide Power: 12 V DC (minimum 30 amp circuit) Current draw at full pressure: 18-24 amps Hydraulic port size: 3/16" inverted flare (standard brake line fitting) Tank: 15.7 oz - DOT 4 fluid Wiring configuration: Black: 12 V DC power Blue: brake controller Yellow: breakaway White: ground 2-Year warranty Note: Deutsche Hydrapro's quality assurance bench testing may result in fluid residue in the reservoir when you receive this actuator.
Trust in faster braking response and improved control for your 5th wheel, horse, or work trailer. Works with from-the-factory electric brake controllers, so you won't need an extra adapter.Features: Activates the hydraulic disc system when you apply the brakes in your vehicle Reaches 1,000 psi in just 3/16 of a second Made to last and protect key components for everyday reliability Stout, extruded aluminum housing minimizes heat Upgraded gaskets and isolated, sealed fluid tank eliminate risk of contamination Powerful DC motor and German-made pump Installs on your trailer frame or in an enclosed compartment Rotating, 360-degree brake line fitting allows for any mounting position Brass fitting is ideal for marine trailers Meets DOT specifications Requires components that are sold separately: EOH-compatible factory or aftermarket trailer brake controller DOT required battery-powered breakaway device with switch 7-Way trailer connector to send wired signal Mounting hardware, wires/connectors, and hydraulic lines/fittings Specs: Application: for single-, tandem-, or triple-axle trailers with disc brakes Maximum output pressure: 1,600 psi Dimensions: 10" long x 3-5/8" wide x 6" tall Mounting holes center-to-center: 10-7/8" long x 1-5/8" wide Power: 12 V DC (minimum 30 amp circuit) Current draw at full pressure: 18-24 amps Hydraulic port size: 3/16" inverted flare (standard brake line fitting) Tank: 15.7 oz - DOT 4 fluid Wiring configuration: Black: 12 V DC power Blue: brake controller Yellow: breakaway White: ground 2-Year warranty Note: The manufacturer's quality assurance bench testing may result in fluid residue in the reservoir when you receive this actuator.
Rely on faster braking response and improved control for your longer 5th wheel, horse, or work trailer. Works with from-the-factory electric brake controllers, so you won't need an extra adapter.Features: Activates the hydraulic disc system when you apply the brakes in your vehicle Reaches 1,000 psi in just 3/16 of a second Made to last and protect key components for everyday reliability Stout, extruded aluminum housing also mitigates heat build-up Upgraded gasket seals and isolated, sealed fluid tank eliminate risk of contamination Powerful DC motor and German-made pump Installs on your trailer frame or in an enclosed compartment Rotating, 90-degree brake line fitting allows for any mounting position Meets DOT specifications Requires components that are sold separately: EOH-compatible factory or aftermarket trailer brake controller DOT required battery-powered breakaway device with switch 7-Way trailer connector to send wired signal Mounting hardware, wires/connectors, and hydraulic lines/fittings Specs: Application: higher volume unit for long triple- or quad-axle trailers with disc brakes Maximum output pressure: 1,600 psi Dimensions: 16-7/16" long x 3-5/8" wide x 6" tall Mounting holes center-to-center: 16-7/8" long x 1-5/8" wide Power: 12 V DC (minimum 30 amp circuit) Current draw at full pressure: 18-24 amps Hydraulic port size: 3/16" inverted flare (standard brake line fitting) Tank: 28.7 oz - DOT 4 fluid Wiring configuration: Black: 12 V DC power Blue: brake controller Yellow: breakaway White: ground 2-Year warranty Note: Deutsche Hydrapro's quality assurance bench testing may result in fluid residue in the reservoir when you receive this actuator.
Trust in faster braking response and improved control for your 5th wheel, horse, or work trailer. Works with from-the-factory electric brake controllers, so you won't need an extra adapter.Features: Activates the hydraulic disc system when you apply the brakes in your vehicle Reaches 1,000 psi in just 3/16 of a second Made to last and protect key components for everyday reliability Stout, extruded aluminum housing in black minimizes heat Upgraded gaskets and isolated, sealed fluid tank eliminate risk of contamination Powerful DC motor and German-made pump Installs on your trailer frame or in an enclosed compartment Rotating, 360-degree brake line fitting allows for any mounting position Brass fitting is ideal for marine trailers Meets DOT specifications Requires components that are sold separately: EOH-compatible factory or aftermarket trailer brake controller DOT required battery-powered breakaway device with switch 7-Way trailer connector to send wired signal Mounting hardware, wires/connectors, and hydraulic lines/fittings Specs: Application: for single-, tandem-, or triple-axle trailers with disc brakes Maximum output pressure: 1,600 psi Dimensions: 10" long x 3-5/8" wide x 6" tall Mounting holes center-to-center: 10-7/8" long x 1-5/8" wide Power: 12 V DC (minimum 30 amp circuit) Current draw at full pressure: 18-24 amps Hydraulic port size: 3/16" inverted flare (standard brake line fitting) Tank: 15.7 oz - DOT 4 fluid Wiring configuration: Black: 12 V DC power Blue: brake controller Yellow: breakaway White: ground 2-Year warranty Note: The manufacturer's quality assurance bench testing may result in fluid residue in the reservoir when you receive this actuator.
Trust in faster braking response and improved control for your longer 5th wheel, horse, or work trailer. Works with from-the-factory electric brake controllers, so you won't need an extra adapter.Features: Activates the hydraulic disc system when you apply the brakes in your vehicle Reaches 1,000 psi in just 3/16 of a second Made to last and protect key components for everyday reliability Stout, extruded aluminum housing also mitigates heat build-up Upgraded gasket seals and isolated, sealed fluid tank eliminate risk of contamination Powerful DC motor and German-made pump Installs on your trailer frame or in an enclosed compartment Rotating, 90-degree brake line fitting allows for any mounting position Brass fitting is ideal for marine trailers Meets DOT specifications Requires components that are sold separately: EOH-compatible factory or aftermarket trailer brake controller DOT required battery-powered breakaway device with switch 7-Way trailer connector to send wired signal Mounting hardware, wires/connectors, and hydraulic lines/fittings Specs: Application: higher volume unit for long triple- or quad-axle trailers with disc brakes Maximum output pressure: 1,600 psi Dimensions: 16-7/16" long x 3-5/8" wide x 6" tall Mounting holes center-to-center: 16-7/8" long x 1-5/8" wide Power: 12 V DC (minimum 30 amp circuit) Current draw at full pressure: 18-24 amps Hydraulic port size: 3/16" inverted flare (standard brake line fitting) Tank: 28.7 oz - DOT 4 fluid Wiring configuration: Black: 12 V DC power Blue: brake controller Yellow: breakaway White: ground 2-Year warranty
Your trailer won't stop fast enough when you brake, especially on hills or in traffic. Upgrading to disc brakes fixes that. This kit includes everything you need to run EOH brakes without the signal errors and lag that cause most systems to fail.This kit gives you the actuator, sealed harness, battery, switch, and junction box, all built to work together. It takes one of the hardest parts of a disc brake upgrade and makes it straightforward.
Replaces the caliper bracket for Dexter standard 10" disc brake assemblies.Features: Replaces the caliper bracket for Dexter standard 10" disc brake assemblies Does not fit premier 10" disc brake assemblies Dacromet coating provides superior corrosion resistance for freshwater or saltwater use 500-Hour salt-spray rating
For years, this UFP-style surge brake actuator has been the gold standard for boat trailers. Its bolt-on, low-profile design looks sleek on your trailer, and it comes with both electric and manual reverse lockouts. ... Or, if you're towing with a different vehicle than you normally do, add "put manual lockout pin in glovebox" to your pre-trip checklist. How Does a Surge Brake Actuator Work? When you slow to a stop as you're towing, momentum pushes your trailer toward the rear of your vehicle. When this happens, the surge brake actuator compresses the master cylinder inside, which forces it to push hydraulic fluid out to your brake lines, ultimately engaging your trailer brakes.
Use this actuator to synchronize your trailer brakes with your tow-vehicle brakes. Over-center latch mechanism only engages when the actuator is fully seated on 2" hitch ball. Designed for hydraulic disc brakes and 3x3 or 3x4 straight tongue.With surge brake systems, the actuator is triggered as your trailer moves forward while the tow vehicle slows. The actuator telescopes, applying force to its master cylinder, which in turn supplies the necessary hydraulic pressure to engage the trailer's brakes.
Replaces the master cylinder assembly for your Dexter Model 10 or Model 20 brake actuator. Works for disc brake applications only. For drum brake applications use T2374600 instead.Features: Replaces the master cylinder assembly for your Dexter Model 10 or Model 20 brake actuator Works for disc brake applications only For drum brake applications use T2374600 instead Comes with the master cylinder and everything needed to install in your actuator including: Master cylinder Brass connector Right-hand cylinder mounting bracket Left-hand cylinder mounting bracket (2) 3/8" Hex bolts (2) 3/8" Hex nuts (2) 3/8" Lock washers Filler cap Fits: All Dexter Model 10 brake actuators for disc brakes All Dexter Model 20 brake actuators for disc brakes
Replaces 1 anchor yoke assembly for your Dexter disc brake caliper rated for 8,000 lbs.Features: Replaces 1 anchor yoke assembly for your Dexter disc brake caliper rated for 8,000 lbs
Filters
