Applies your boat trailers free-backing drum brakes. Listen for the click on the eZ-Latch when coupling, and you'll never worry about highballing ever again. Made in the USA with heavy-duty, zinc-plated steel, and other corrosion-resistant parts.
A-frame coupler is made of sturdy steel and has a silver powder coat finish, making it ideal for marine applications. eZ-Latch ensures fast, easy, secure hookup and disconnect. Includes cutout for your 2-1/4" round jack. Bolt-on installation.
A-frame coupler is made of sturdy steel and has a durable zinc finish with a 200-hour salt spray rating. eZ-Latch ensures fast, easy, secure hookup and disconnect. Includes cutout for your 2-1/4" round jack. Bolt-on installation.
3-3/4" Round. Incandescent trailer light serves as a stop, tail, turn, and license plate light. Durable polycarbonate housing with screw-on lens. Stud mount with included studs. 2-Wire design grounds through mounting hardware. (1) 1157 Bulb.
Straight-tongue coupler is made of sturdy steel and has a corrosion-resistant zinc finish with a 200-hour salt spray rating. eZ-Latch ensures fast, easy, secure hookup and disconnect. Designed to bolt onto your 3" wide trailer tongue.
Yes, the correct replacement door latch kit you'd want is the Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option #295-000019. This matches the exact type of latch that you sent in a picture of. I attached a review video for…
I was able to go out to our warehouse and measure the face plate on the Bauer Products Camper Door Lock #BA65FR. The face plate is 5-1/2" tall and 5-7/8" wide.
I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…
There is! To replace the standard pin and clip on the Curt QuickPin No Latch A-Frame Trailer Coupler #C84DR Curt actually recommend the Hitch Lock #C23025 which is what I recommend going with!
We have just what you are looking for. I called my contact at TDE and asked about the hub you have on your boat trailer. They told me that it was a 5-stud idler hub for a 3,500-lb axle. That means you need the part #AKIHUB-545-35-K. This is a fit for…
There typically aren't any part numbers stamped onto the trailer spindle that can be used for identification. There are however numbers stamped onto the hub most times which can be used for identification. The TDE46210 tells me you have a 3,500…
To install the Demco A-Frame Trailer Coupler #DM16680-52 that you referenced, you will want to use 3/8 inch, grade 5 bolts , approximately 1-1/2 inches long (depending on how you are installing the coupler). You will want to use 5 of these bolts per…
The Demco coupler #DM16680-52 you were looking at does not include the hardware needed for installation. It would be a good idea to switch over from your weld on to a bolt on coupler, this will make it a whole lot easier to replace over time as it…
If you look at the diagram that I received from my contact at Demco, you can see several of the dimensions of the #DM14793-81 trailer coupler. If there were other dimensions you were needing, please let me know.
Correct, there will need to be a small amount of wiggle room or play between the trailer coupler and hitch ball which is to allow the trailer to track and turn smoothly. If the connection point between the trailer coupler and hitch ball was too tight…
Thanks so much for the photos, and there isn't a replacement for just the front coupler portion of the long-discontinued coupler you have. So in order to switch out from a 2" to a 2-5/16" coupler attachment, you will need to replace the…
I do have an option for you and this is a common question but the trailer coupler repairs kits aren't universal and only a very few available for select trailer couplers. Therefore, if you're having issue with your existing coupler it will…
Heavy-duty, stainless steel lock provides superior security when locking your cast Demco eZ-Latch trailer coupler or gooseneck coupler ball. Third-party-tested pin has a 42,000-lb shear strength.
Use this 4-hole, 3-position channel bracket to mount your height-adjustable coupler. Offers 6" of vertical adjustment. Raw finish makes welding a breeze.
Use this heavy-duty cast iron coupler lock to help prevent trailer towaway theft. Fits standard 2-5/16" ball couplers with flat lips. Resists picking, cutting, drilling, and freezing. Tumbler offers nearly 1 million possible key codes.
Footplate, weld-on mount and pull pin are included with this round swivel jack. Ideal for agricultural and commercial uses. Jack has 11-3/16" retracted height and measures 4" from mounting bracket to top, excluding handle.
Surge-type actuator features a corrosion-resistant composite master cylinder and a primed finish. EZ-Latch coupler latch is easy to use. Welds onto a 50-degree A-frame trailer.
Surge actuator has a corrosion-resistant composite master cylinder and zinc plating. EZ-Latch coupler is easy to use. Electric lockout activates automatically to keep brakes from actuating when in reverse.
Straight-tongue coupler is made of sturdy steel with a silver powder coat finish, making it ideal for marine applications. eZ-Latch ensures fast, easy, secure hookup and disconnect. Designed to bolt onto your 3" wide trailer tongue.
Straight-tongue coupler is made of sturdy steel with a silver powder coat finish, making it ideal for marine applications. eZ-Latch ensures fast, easy, secure hookup and disconnect. Designed to bolt onto your 3" wide trailer tongue.
Straight-tongue coupler is made of sturdy steel with a silver powder coat finish, making it ideal for marine applications. eZ-Latch ensures fast, easy, secure hookup and disconnect. Bolts onto your 3" wide trailer tongue. 5-Hole bolt-on case.
Straight-tongue coupler is made of sturdy steel with a silver powder coat finish, ideal for marine applications. eZ-Latch ensures fast, easy, secure hookup and disconnect. Designed to bolt onto your 3" wide trailer tongue. 4-Hole bolt-on case.
Wheel chocks are ideal for ground support equipment or construction vehicles. Place chocks on either side of your wheel to help keep your vehicle from moving while it's parked. Rope keeps set together and allows you to pull them out easily.
Mount this connector in your truck bed to hook up your 5th-wheel or gooseneck trailer. Custom harness plugs in-line with factory wiring. 90-Degree connector fits into tight spaces. Aluminum mounting screws avoid galvanic corrosion in an aluminum bed.
Install this heavy-duty hitch on your vehicle so that you can securely tow your gooseneck trailer. Store the removable ball upside down in the hitch when you aren't towing to get complete bed access. Square ball base won't turn in hitch.
2" Shock-absorbing ball mount is designed for superior ride comfort and control. ShockDrop core absorbs road vibration and rattling to minimize stress on your rig's suspension and braking systems. Rugged, textured finish resists rust.
Use this low-profile hook-and-keeper door holder to keep your trailer door open while you're loading and unloading. Zinc-plated steel construction resists corrosion and lasts longer than plastic holders. Mounting screws not included.
Replace the standard entry door lock on your camper or travel trailer with this durable locking latch. It replaces your original Bauer, Global Link, Lippert, Fastec, or TriMark entry door lock. Can be keyed alike to match other Bauer RV locks.
Flip and stow this pintle hook combo beneath your hitch for a sleek look when you are done towing. Haul up to 16,000 lbs with the pintle hook or up to 10,000 lbs with the 2" ball.
Filter Results
