This steel D-ring tie-down kit gives you a strong, secure anchor point for hauling cargo without getting in the way. The flush-mount design sits low to prevent interference, and each pack includes 2 rings with mounting hardware.Features: Steel D-ring tie-down kit provides a secure anchor point for hauling cargo Flush-mount design sits low so it does not interfere with your cargo 5,000-lb Rating supports heavy-duty tie-down applications Zinc-plated finish helps resist corrosion Stainless steel hardware and galvanized backer plates are included for installation 2 D-rings are included per pack Specs: Quantity: 2 D-rings Rating: 5,000 lbs Construction: Material: Steel Finish: Zinc plated Hardware: Stainless steel Backer plates: Galvanized
Weld on a heavy-duty tie-down point where your load sits, not where the trailer came with loops. The curved D-ring gives hooks and straps more room to seat, so you can cinch down hard without fighting a flat ring.A Curved Ring Gives Your Tie-Down Hardware Room to Sit Right This D-ring has a bend instead of a flat ring, which helps hooks and strap hardware seat more naturally on the anchor point.
Bolt a tie-down point where your load sits, not where the trailer came with loops. This forged steel D-ring and bolt-on clip give straps, chain, and hooks a solid place to connect, so you spend less time re-hooking and repositioning tie-downs.Highlights 4,000-lb Working Load Limit for Cargo Control: A solid capacity for utility trailers, haulers, and tie-down upgrades. Bolt-On Clip and D-Ring Let You Add a Tie-Down Point Where You Need It: Place it where your straps or chain pull straight to help reduce off-angle pulls.
Weld on a tie-down point where your load sits, not where the trailer came with loops. This forged steel D-ring and weld-on clip give straps, chain, and hooks a direct place to connect, so you spend less time re-hooking and repositioning tie-downs.Highlights 4,000-lb Working Load Limit for Cargo Control: A solid capacity for utility trailers, haulers, and tie-down upgrades. Weld-On Clip and D-Ring Let You Add a Tie-Down Point Where You Need It: Place it where your straps or chain pull straight to help reduce off-angle pulls.
Weld on a heavy-duty tie-down point where your load sits, not where the trailer came with loops. This forged steel D-ring and weld-on clip give straps, chain, and hooks a tough place to connect, so you can cinch down hard without shifting tie-downs.Highlights 15,600-lb Working Load Limit for Heavy-Duty Cargo Control: A solid capacity for equipment trailers, flatbeds, and haulers that see big loads. Weld-On Clip and D-Ring Let You Add a Tie-Down Point Where You Need It: Place it where your straps or chain pull straight to help reduce off-angle pulls.
Weld on a heavy-duty tie-down point where your load sits, not where the trailer came with loops. This forged steel D-ring and weld-on clip give straps, chain, and hooks a tough place to connect, so you can cinch down hard without reworking tie-downs.Highlights 8,833-lb Working Load Limit for Heavy-Duty Cargo Control: A solid capacity for equipment trailers, flatbeds, and haulers that see big loads. Weld-On Clip and D-Ring Let You Add a Tie-Down Point Where You Need It: Place it where your straps or chain pull straight to help reduce off-angle pulls.
Hey Corry, you would basically want to mock up the Terran Industries Tandem-Axle Hanger Kit #TX85VJ with the 26-5/8 inch springs that you have and have the springs temporarily mounted in the hanger and the equalizers to get the correct dimensions to…
Hey Nate, We do not have a 3/4" spindle nut or washer, the smallest option is the 7/8" spindle nut #165931and a 1" washer #SW1000. I cannot find anything smaller. Are you sure the threads on you're spindle are 3/4"? If they…
Hey Kerri. The Replacement Fabric item #e96QV is going to be white when it's rolled up. This black fade fabric is designed to replace the ones on 15' wide awnings like our etrailer item #e24QV. What kind of awning do you have and what color…
Hey Dave. The T5079 RV Designer Entrance Door Lock item #RD68SR is made of a die-cast zinc alloy for the housing and handles. The strike plate, plunger load pins and plunger end plates are made of steel. The parts are then black powder coated and…
The best way to power the interior lights in your trailer is with its own independent battery. You will not want to use the breakaway battery. The breakaway battery is only designed to operate the breakaway and will drain extremely quickly,…
Hey Tim. From center to center of the hitch pin holes is 10" on the etrailer High-Low Fixed Adapter for Tow Bars item #e85ZV. This 2" high low adapter fits a 2" hitch receiver and has a 10,000 lbs capacity. It's designed to be used…
To use a TorkLift 48" hitch extender you will have to change out your receiver on your 2019 GMC Sierra 3500HD Denali. The TorkLift Cannon Hitch Extension #TLE1648 will only fit the 3" receiver that comes on the Ford Super Duty trucks. To…
Hey Gary! I would be happy to help you get all the parts you need to flat tow your new Flat Tow 2025 Ford Escape Platinum Hybrid. If you don't already have them, make sure you get the version of the Ready Brute Elite that has the Roadmaster…
Hey Joan, there's a good chance you still will be able to open your moonroof with the Malone roof rack part number #MAL74AR installed but what you will most likely notice is a lot of wind noise and you'll want to keep it shut when you have…
Hello Jason, thanks for reaching out. The Bauer Products Locking Cam Latches #BA84FR and #BA32FR are dimensionally the same. The difference is in the kind of keys they use. The #BA84FR uses the 300 series keys and offers a keyed alike option. Meaning…
For your 2022 Volkswagen Taos, we do have the Vehicle Wiring Harness #C59236. This wiring kit with give a 4-flat connector and we power your trailer's stop, turn, tail, and running lights directly from the tow vehicle's battery.
Weld on a tie-down point where your load sits, not where the trailer came with loops. This forged steel D-ring and weld-on clip give straps, chain, and hooks a tough place to connect, so you can cinch down without reworking tie-downs.Highlights 6,300-lb Working Load Limit for Heavy-Duty Cargo Control: A solid capacity for equipment trailers, flatbeds, and haulers that see big loads. Weld-On Clip and D-Ring Let You Add a Tie-Down Point Where You Need It: Place it where your straps or chain pull straight to help reduce off-angle pulls.
Weld on a tie-down point where your load sits, not where the trailer came with loops. This forged steel D-ring and weld-on clip give straps, chain, and hooks a solid place to connect, so you spend less time re-hooking and repositioning tie-downs.Highlights 1,667-lb Working Load Limit for Heavy-Duty Cargo Control: A solid capacity for equipment trailers, flatbeds, and haulers that see big loads. Weld-On Clip and D-Ring Let You Add a Tie-Down Point Where You Need It: Place it where your straps or chain pull straight to help reduce off-angle pulls.
These sturdy steel D-rings create stable tie-down points in your trailer or truck bed. Recessed D-rings swivel 360 degrees for versatile tie-down positioning. ... Features: D-ring anchors provide tie-down points in your utility trailer or truck bed Perfect for securing a rope, cargo net, bungee cord, or ratchet strap (sold separately) 360-Degree swivel lets you rotate D-rings so you can easily attach straps from any angle Recessed, low-profile design helps prevent D-rings from interfering as you roll cargo into and out of your trailer or truck bed Backing plates reinforce the surface of your trailer where the tie-downs attach Zinc-plated steel resists rust and corrosion Bolt-on installation on flat surface Cut a hole in your trailer or truck bed for the recessed portion of the D-ring to sit inside Backing plates attach directly under D-ring anchors and on the opposite side of the mounting surface 16 Nuts, 16 lock washers, and (16) 5/16" x 2-1/4" bolts included Specs: Maximum load (break strength): 6,000 lbs per D-ring Safe working load limit (WLL): 2,000 lbs per D-ring Anchor dimensions: Base diameter: 6-5/16" Recess: 7/8" D-ring thickness: 1/4" Backing plate dimensions: 6-1/2" long x 6-1/2" wide x 1/8" thick Quantity: 4 D-rings Limited 1-year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Black powder coated anchors slide into a 2x4 stake pockets on your flatbed truck or trailer. Movable anchors secure with the included pins and clips, so you can quickly and easily remove and reinstall them as needed. 12,000 lbs Max load.Features: Stake pocket anchors provide tie-down points in your flatbed truck or trailer Movable anchors slide into a standard 2x4 stake pockets Can be easily removed and reinstalled as needed Secure in place with included pins and clips Hinged D-rings let you attach straps from different angles Black powder coated steel is durable and rust resistant Specs: Safe working load limit (WLL): 4,000 lbs Maximum load (break strength): 12,000 lbs Inner diameter of D-ring: 2-3/8" Anchor dimensions: 5" Tall from the bottom of the mounting plate to the bottom of the anchor 2-3/4" Wide 3-1/4" Tall from the bottom of the mounting plate to the top of the pin hole Quantity: 2 stake pocket tie-downs Anchor weight (each): 3 lbs 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring. ... Specs: Maximum load (break strength): 6,000 lbs Safe working load limit (WLL): 2,000 lbs Anchor: Bezel dimensions: 4-1/2" wide x 4-7/8" tall D-ring thickness: 3/8" Inner ring diameter: 1-3/8" Recess dimensions: 3-3/8" wide x 3/4" deep Bolt hole dimensions: 3/8" wide x 3/8" long 1-Year limited warranty Features: Tie-down provides a solid point to secure your cargo with straps or bungee cords D-ring pivots 90 degrees so you can attach straps from multiple angles Recessed design allows cargo to slide over the ring without interference Zinc-plated steel construction resists corrosion and retains its strength through repeated use 1/4" Hole located underneath D-ring for drainage Simple, bolt-on installation Square mounting holes Mounting hardware not included Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Zinc-plated, corrosion resistant steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring. ... Features: Tie-down anchor provides a solid point to secure your cargo with straps or bungee cords D-ring 90-degrees so you can attach straps from multiple angles Recessed design allows cargo to slide over the ring without interference Included backing plate provides greater support than mounting the anchor directly to wood Zinc-plated steel construction resists corrosion and retains its strength through repeated use Simple, bolt-on installation with mounting hardware Includes 4 Nuts, 4 lock washers, and (4) 3/8" x 2-1/4" bolts Specs: Maximum load (break strength): 5,000 lbs Working load limit: 1,600 lbs Anchor: Bezel dimensions: 4-1/2" wide x 4-7/8" tall Ring diameter: 1/2" Inner ring diameter: 1-3/8" Recess dimensions: 3-3/8" wide x 3/4" deep Bolt hole dimensions: 3/8" wide x 3/8" tall Bolt size: 3/8" diameter x 2-1/4" long Backing plate dimensions: 6-1/2" wide x 6-1/2" tall 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring. ... Features: Tie-down provides a solid point to secure your cargo with straps or bungee cords D-ring pivots 90 degrees so you can attach straps from multiple angles Recessed design allows cargo to slide over the ring without interference Zinc-plated steel construction resists corrosion and retains its strength through repeated use 1/4" Hole located underneath D-ring for drainage Simple, bolt-on installation Round mounting holes Mounting hardware not included Specs: Maximum load (break strength): 6,000 lbs Safe working load limit (WLL): 2,000 lbs Anchor: Bezel dimensions: 4-1/2" wide x 4-7/8" tall D-ring thickness: 3/8" Inner ring diameter: 1-3/8" Recess dimensions: 3-3/8" wide x 3/4" deep Bolt hole dimensions: 3/8" wide x 3/8" long 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This sturdy D-ring anchor bolts onto a backing plate (BP1D - sold separately) to create an attachment point for tie-down straps and bungee cords wherever you need cargo control. ... Features: Tie-down anchor provides a solid point to secure your cargo with straps or bungee cords Requires backing plate (BP1D - sold separately) for installation D-ring rotates 180 degrees so you can attach straps from multiple angles Zinc-plated steel construction resists corrosion and retains its strength through repeated use Built-in bolt for easy installation Made in the USA Specs: Safe working load limit (WLL): 2,000 lbs Maximum load (break strength): 6,000 lbs Ring diameter: 1/2" Bolt dimensions: 3" long x 5/8" diameter Thread: 5/8-11 1-Year limited warranty
Bolt-on 5/8" forged D-ring spreads the pull to the entire mounting plate instead of concentrating it on a single point. Bolt-on design means you don't have to weld, so it's great for surfaces like wood where welding is not an option.Features: 4-Hole mounting bracket helps spread pull force to multiple anchor points Versatile uses across many applications Works on flat wood or metal surfaces Corrosion-resistant black powder-coated finish Strong forged steel construction Includes required mounting hardware: 4 carriage bolts and 4 nuts Made in the USA Specs: Working load limit: 6,130 lbs Ring diameter: 5/8" Inner dimensional height: 3" Inner dimensional width: 3" Carriage bolt length: 2-1/4"
Securing cargo is easy and convenient with this set of 4 D-rings. Powder coated steel offers corrosion resistance. D-rings bolt onto the surface of your trailer or cargo carrier. Mounting hardware is not included.Features: D-ring anchors provide attachment points for securing ropes, straps, or bungees to your trailer Rings swivel for easy hookup Bolt-on installation Hardware not included Durable, powder coated steel resists corrosion Specs: Quantity: 4 D-rings Capacity: 800 lbs per ring Interior dimensions: 1-3/4" x 1-1/2" D-ring thickness: 1/4" Bolt hole diameter: 3/8" 1-Year limited warranty
This sturdy D-ring serves as an attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring and is zinc-plated for corrosion resistance. ... Features: D-ring anchor provides tie-down point in your utility trailer or truck bed Perfect for securing a rope, cargo net, bungee cord, or ratchet strap (sold separately) 360-Degree swivel lets you rotate D-ring so you can easily attach straps from any angle Recessed, low-profile design helps prevent D-ring from interfering as you roll cargo in and out of your trailer or truck bed Backing plate reinforces the surface of your trailer where the tie-down is attached Zinc-plated steel resists rust and corrosion Bolt-on installation on flat surface Cut a hole in your trailer or truck bed for the recessed portion of the D-ring to sit inside Backing plate attaches directly under D-ring anchor and on the opposite side of the mounting surface 4 Nuts, 4 lock washers, and (4) 5/16" x 2-1/4" bolts included Specs: Maximum load (break strength): 6,000 lbs Safe working load limit (WLL): 2,000 lbs Anchor: Base diameter: 6-5/16" Recess: 7/8" D-ring thickness: 1/4" Backing plate dimensions: 6-1/2" long x 6-1/2" wide x 1/8" thick Limited 1-year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Black powder coated anchor slides into a 2x4 stake pocket on your flatbed truck or trailer. Movable anchor secures with the included pin and clip so you can quickly and easily remove and reinstall it as needed. 12,000-lb Maximum load.Features: Stake pocket anchor provides a tie-down point in your flatbed truck or trailer Movable anchor slides into a standard 2x4 stake pocket Can be easily removed and reinstalled as needed Secures in place with included pin and clip D-ring is hinged so straps can be attached from different angles Black powder coated steel is durable and rust resistant Made in the USA Specs: Dimensions: 8-1/4" tall x 3-1/2" wide Safe working load limit (WLL): 4,000 lbs Maximum load (break strength): 12,000 lbs Inner diameter of D-ring: 3" Shackle diameter: 5/8" Quantity: 1 stake pocket tie-down 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Recessed design lets you roll cargo over the D-ring without interference. ... Utility Trailer D-Ring Tie Down Recessed Ring Swivels 360 Degrees Zinc Plated Bolt-On Design Capacity: 6,000 lbs. Safe Working Load Limit: 2,000 lbs. 4 bolt holes are 3-13/16" apart Bolt holes are 1/4" in diameter Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Black powder coated anchor slides into a 2x4 stake pocket on your flatbed truck or trailer. Movable anchor secures with the included pin and clip so you can quickly and easily remove and reinstall it as needed. 12,000-lb Maximum load.Features: Stake pocket anchor provides a tie-down point in your flatbed truck or trailer Movable anchor slides into a standard 2x4 stake pocket Can be easily removed and reinstalled as needed Secures in place with included pin and clip D-ring is hinged so straps can be attached from different angles Black powder coated steel is durable and rust resistant Made in the USA Specs: Dimensions: 7-1/4" usable height x 3-1/2" outside width Safe working load limit (WLL): 4,000 lbs Maximum load (break strength): 12,000 lbs Inner diameter of D-ring: 2-5/16" Shackle diameter: 1/2" Quantity: 1 stake pocket tie-down 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Recessed design lets you roll cargo over the D-ring without interference. ... Features: D-ring anchor provides tie-down point in your utility trailer or truck bed Perfect for securing a rope, cargo net, bungee cord, or ratchet strap (sold separately) Recessed, low-profile design helps prevent D-ring from interfering as you roll cargo in and out of your trailer or truck bed Zinc-plated steel resists rust and corrosion Bolt-on installation on flat surface Hardware not included Specs: Maximum load (break strength): 1,200 lbs Safe working load limit (WLL): 400 lbs Base dimensions: 5" long x 3-9/16" wide Recess: 5/16" D-ring thickness: 1/4" Fastener hole diameter: 5/16" 1-Year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Some loads need more than a light tie-down point. This ProGrip weld-on D-ring adds a permanent place to hook straps or chains so you can cinch heavy cargo down and roll out knowing the connection point is not going anywhere.Welds Directly To Your Trailer: Installation creates a secure anchor that will not shift under load. Single D-Ring Anchor: Sold individually so you can place anchors exactly where you need them. Specs Capacity: Break strength: 20,000 lbs Quantity: 1 D-ring Installation: Mounting method: weld-on Construction: Material: steel
These D-rings let you add extra anchor points on your truck, utility trailer or enclosed cargo trailer. Bolt to most flat, solid surfaces. Perfect for securing push mowers, tillers, and other lightweight cargo.Features: Light-duty D-ring tie-down anchors provide solid attachment points for ropes, straps or bungees Let you anchor push mowers, tillers, and other lightweight cargo on your truck, trailer or van D-rings rotate 180 degrees so you can attach your ropes, straps or bungees from multiple angles Steel construction with clear-zinc plating is strong and corrosion resistant Bolt-on installation to most flat, solid surfaces Mounting hardware not included Specs: Quantity: 4 Maximum load (break strength): 1,200 lbs Safe working load limit (WLL): 400 lbs D-ring dimensions: Thickness: 1/4" Inner dimensions: 1-1/8" wide x 1" long Overall width: 1-5/8" Mounting bracket dimensions: 2-5/16" long x 3/4" wide Distance between mounting holes (center to center): 1-9/16" 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Filters
