Rust-resistant galvanized steel bracket lets you mount a tail light to your trailer frame. Acts as direct replacement for bracket on CE Smith boattrailer (CE48810). Requires (2) 3/8" carriage bolts (sold separately) for installation.Features: L-shaped tail lightbracket lets you mount a tail light on your trailer Designed for CE Smith boattrailer (CE48810) Fits most stud-mounted tail lights 11-Gauge galvanized steel resists rust and corrosion Suitable for saltwater exposure Bolt-on installation Requires (2) 3/8" carriage bolts (sold separately) Made in the USA Specs: Quantity: 1 bracket Dimensions: 4-1/2" long x 3-1/8" wide x 1-1/2" tall Distance between trailer mounting holes (center to center): 2" Distance between tail light mounting holes (center to center): 2" Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
Use this bracket to mount a tail light on your boattrailer's post-style guide-on. Keeps light out of the water and away from your boat. Pre-galvanized steel resists corrosion. ... Features: Sturdy bracket provides mounting point for 1 tail light (sold separately) on your boattrailer's post-style guide-on Extends light 7-1/2" away from your trailer Keeps light out of the water to prevent damage while loading or unloading your boat 12-Gauge, pre-galvanized steel construction resists corrosion Simple installation Drill holes and bolt bracket onto guide-on Easily attach your surface-mount tail light onto the bracket Mounting hardware included Made in the USA Specs: Application: surface-mount tail lights Fits 2" diameter guide-on post Quantity: 1 bracket Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width.
3-3/4" x 7/8" Oblong. Waterproof LED marker light can be installed on your trailer fender. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. 2-Wire pigtail. ... Features: Dual-face LED trailerlight installs on your trailer fender Sonically sealed, waterproof unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Red and amber lens over white LEDs Compatible with 12V DC systems Surface mount on trailer with included bracket 2-Wire pigtail with power lead and ground wire P2 rated light produces a 90-degree beam pattern Specs: Quantity: 1 fender light Dimensions with bracket: 3-3/4" long x 7/8" tall x 13/16" thick Distance between mounting holes (center on center): 3" Diodes: 2 Lifetime warranty on LEDs Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boattrailer.
4-1/8" x 1-1/4" Rectangle. Waterproof, LED trailerlight serves as either a side marker light or clearance light. Durable polycarbonate housing and lens. Surface mount with bracket. ... Surface-Mount Light Surface-mount trailerlights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring.
2-1/8" x 1-3/8" x 1-3/4". Waterproof trailerlight illuminates your license plate. Clear lens under polycarbonate housing. Recessed mount with included bracket and grommet. 2-wire design with.180 male bullets.This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.
8-5/8" x 3-1/4" x 2-5/16". Waterproof trailerlight illuminates your license plate. Durable ABS housing. Clear lens under polycarbonate housing. Surface mount on 3-1/2" centers with included bracket. 2-Wire design. 5 Diodes.Features: Light angles down to illuminate your trailer's license plate Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Clear lens with white LEDs Steel bracket construction resists corrosion Mounts on surface of trailer with included bracket Installation hardware not included 2-Wire pigtail - includes power lead and ground wire DOT approved Specs: Diodes: 5 Overall dimensions: 8-1/2" long x 3" tall x 2-5/16" deep Distance between mounting holes (center to center): 3-1/2" Power draw at 12.8V: 0.045 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boattrailer.
4-1/8" x 1-1/4" Rectangle. Waterproof, LED trailerlight serves as either a clearance or side marker light. Durable polycarbonate housing and lens. Surface mount with bracket. Single wire grounds through mounting hardware. ... Surface-Mount Light Surface-mount trailerlights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring.
3-15/16" x 1-1/4". Waterproof LED marker light can be installed on your trailer fender. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. ... Features: Dual-face LED trailerlight installs on your trailer fender Thinline Series has a low profile so that light can fit in tight spaces Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Red and amber lens over white LEDs Compatible with 12V DC systems Surface mount on trailer with included bracket Hardwired with industry standard 1-prong plug P2 rated Specs: Quantity: 1 fender light Dimensions with bracket: 4-1/16" long x 1-1/4" tall x 1-1/8" thick Light dimensions: 3-15/16" long x 1-1/4" tall x 7/8" thick Distance between mounting holes (center on center): 3" Diodes: 10 Power draw at 12.8V: 0.048 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boattrailer.
... Dimpled surface helps keep bracket from sliding along trailer frame.Features: Light-duty bracket lets you mount a bunk board on your boattrailer Ideal for 2x4 or 2x6 bunk boards on small craft trailers Enables the bunk board to pivot during loading Stabilizes bunk board when 2 brackets are used (additional bracket sold separately) Dimpled and lanced design keeps bracket from sliding along trailer frame Slotted mounting hole permits as much as 4-3/8" of height adjustment during installation Bracket installs vertically on your boattrailer's frame with a U-bolt (sold separately) 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 1 bracket Height: 7-1/2" Inside width: 1-3/4" Mounting slot dimensions: 4-3/8" long x 7/16" wide Bunk board mounting hole diameters: 7/16" Typically mounted upright on a boattrailer's crossmembers, vertical bunk brackets allow you to mount a bunk board on its skinny side and run the board from the front of the trailer to the back.
... Dimpled surface keeps bracket from sliding along the trailer frame.Features: Light-duty bracket lets you mount a bunk board on your boattrailer Ideal for 2x4 or 2x6 bunk boards on small craft trailers Enables the bunk board to pivot during loading Stabilizes bunk board when 2 brackets are used (additional bracket sold separately) Dimpled and lanced design keeps bracket from sliding along trailer frame Slotted mounting hole permits as much as 6" of height adjustment during installation Bracket installs vertically on your boattrailer's frame with a U-bolt (sold separately) 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 1 bracket Height: 8-1/2" Mounting slot dimensions: 2-1/2" long x 7/16" wide Spacing between mounting slots: 1/2" Bunk board mounting hole diameters: 7/16" Typically mounted upright on a boattrailer's crossmembers, vertical bunk brackets allow you to mount a bunk board on its skinny side and run the board from the front of the trailer to the back.
... Dimpled surface keeps bracket from sliding along the trailer frame.Features: Light-duty bracket lets you mount a bunk board on your boattrailer Ideal for 2x4 or 2x6 bunk boards on small craft trailers Enables the bunk board to pivot during loading Stabilizes bunk board when 2 brackets are used (additional bracket sold separately) Dimpled and lanced design keeps bracket from sliding along trailer frame Slotted mounting hole permits as much as 6" of height adjustment during installation Bracket installs vertically on your boattrailer's frame with a U-bolt (sold separately) 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 1 bracket Height: 9-1/2" Mounting slot dimensions: 6" long x 7/16" wide Bunk board mounting hole diameters: 7/16" Typically mounted upright on a boattrailer's crossmembers, vertical bunk brackets allow you to mount a bunk board on its skinny side and run the board from the front of the trailer to the back.
Light-duty, rust-resistant bracket lets you mount a bunk board on its side and enables the board to pivot. Slotted mounting hole allows for height adjustment.Features: Light-duty bracket lets you mount a bunk board on your boattrailer Ideal for 2x4 or 2x6 bunk boards on small craft trailers Enables the bunk board to pivot during loading Stabilizes bunk board when 2 brackets are used (additional bracket sold separately) Slotted mounting hole permits as much as 6" of height adjustment during installation Bracket installs vertically on your boattrailer's frame with a U-bolt (sold separately) 11-Gauge, galvanized steel resists rust and corrosion Made in the USA Specs: Quantity: 1 bracket Height: 9-1/2" Mounting slot dimensions: 6" long x 1/2" wide Bunk board mounting hole diameters: 7/16" Typically mounted upright on a boattrailer's crossmembers, vertical bunk brackets allow you to mount a bunk board on its skinny side and run the board from the front of the trailer to the back.
Light-duty, rust-resistant bracket lets you mount a bunk board on its side and enables the board to pivot. Slotted mounting hole allows for height adjustment.Features: Light-duty bracket lets you mount a bunk board on your boattrailer Ideal for 2x4 or 2x6 bunk boards on small craft trailers Enables the bunk board to pivot during loading Stabilizes bunk board when 2 brackets are used (additional bracket sold separately) Slotted mounting hole permits as much as 6" of height adjustment during installation Bracket installs vertically on your boattrailer's frame with a U-bolt (sold separately) 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 1 bracket Height: 12-5/8" Mounting slot dimensions: 9-1/8" long x 1/2" wide Bunk board mounting hole diameters: 7/16" Typically mounted upright on a boattrailer's crossmembers, vertical bunk brackets allow you to mount a bunk board on its skinny side and run the board from the front of the trailer to the back.
Be seen with this 3/4" round amber LED light for clearance or side marking. Mounted in a UV-resistant bracket for easy installation on flat surfaces. Quick wiring with an 8", stripped, 2-wire pigtail - just connect and go. ... Built-In Protection: Raised edges on the bracket shield the light from impacts, brush, and road debris. Waterproof for BoatTrailers: Sealed housing prevents water intrusion - ideal for boat and utility trailers.
Be seen with this 3/4" round red LED light for clearance or side marking. Mounted in a UV-resistant bracket for easy installation on flat surfaces. Quick wiring with an 8", stripped, 2-wire pigtail - just connect and go. ... Built-In Protection: Raised edges on the bracket shield the light from impacts, brush, and road debris. Waterproof for BoatTrailers: Sealed housing prevents water intrusion - ideal for boat and utility trailers.
4-1/8" x 1-1/4". Waterproof, LED trailerlight serves as either a clearance or side marker light. Durable polycarbonate housing and lens. Surface mount with chrome bracket. ... Surface-Mount Light Surface-mount trailerlights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring.
4-1/8" x 1-1/4". Waterproof, LED trailerlight serves as either a clearance or side marker light. Durable polycarbonate housing and lens. Surface mount with chrome bracket. ... Surface-Mount Light Surface-mount trailerlights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring.
2-1/2" x 1-3/16". Waterproof mini trailerlight functions as a clearance light or side marker light when properly mounted. Durable polycarbonate lens. Surface mount with self-grounding bracket and hardware. 1-Wire design. ... Features: Small, rectangular trailerlight functions as a clearance light or side marker light when properly mounted Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Amber lens over white LEDs Surface mount with self-grounding bracket - hardware included Single wire design grounds through mounting hardware P2 rated Specs: Dimensions: 2-1/2" wide x 1-3/16" tall x 7/8" deep Dimensions with bracket: 2-7/8" long x 1-1/2" wide x 1-1/4" deep Distance between mounting holes (center on center): 2" Diodes: 3 Power draw at 12.8V: 0.051 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boattrailer.
7-1/2" x 3-11/16" Rectangle. Low-profile LED driver side RV light functions as a stop, turn, tail, and license plate light. Built-in reflex reflector. Durable polycarbonate housing. Surface mount - hardware not included. 3-Wire design.Features: Low-profile RV tail light provides stop, turn, tail, and license plate functions for driver-side applications Built-in reflex reflector removes the need for a separate reflector Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable plastic housing with acrylic lens Red and clear lens over white LEDs Compatible with 12V DC systems Surface mount to RV with included bracket - hardware not included 3-Wire pigtail hardwires to RV Specs: Configuration: driver side Passenger side: RVSTL20 (sold separately) Dimensions: 7-1/2" long x 5" tall x 1-5/16" deep Diodes: Tail light: 6 License plate light: 2 Power draw at 12V Stop/turn: 0.117 amps Tail: 0.053 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boattrailer.
Easily raise or lower your boattrailer's bunk board with this slotted, zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Slotted design lets you adjust the height of the bracket during installation Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3-1/2" long Slot dimensions: 1-1/4" long x 3/8" wide
Help keep your boat in place when it's loaded on your trailer with this zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3" long Mounting hole diameter: 1/2"
Help keep your boat in place when it's loaded on your trailer with this zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3-1/2" long Mounting hole diameter: 1/2"
Create a fixed-position tie-down point on your boattrailer with this heavy-duty mounting bracket. It bolts onto your trailer and provides a 30-degree mounting angle. Made of corrosion-resistant galvanized steel.Features: Creates a fixed-position tie-down on your trailer Bolts to trailer's frame, wall or floor Mounting hardware not included 30-Degree mounting angle accommodates most tie-down applications Constructed of galvanized steel - long-lasting and corrosion resistant Made in the USA Specs: Quantity: 1 bracket Length: 4" Width: 1-15/16" Small bolt hole diameter: 1/2" Large bolt hole diameter: 7/8" The 30-degree mounting angle of this bracket makes it simple to attach a rope or to hook up straps by spacing the anchor away from the wall or floor, proving easy access to the tie-down hole.
These split roller brackets brace any size roller on your boattrailer. They come in handy in areas where a one-piece bracket will not fit. They feature corrosion-resistant, galvanized steel construction and slotted mounting holes for adjustability.Features: Right- and left-hand brackets support a roller on your boattrailer Fit any length roller that has 5/8" diameter shaft Sturdy, 11-gauge, galvanized steel construction resists corrosion 6 Gussets provide extra strength by stiffening the bends Slotted mounting holes allow you to adjust the position during installation Made in the USA Specs: Quantity: 1 pair Application: 4", 5", 8", 10", 12" and 18" long rollers Requires 5/8" diameter roller shaft Dimensions of mounting slots (each): 1/2" wide x 5" tall These split panel brackets mount upright to a trailer's crossmember.
Filters
