When shower sump water backs up in a cramped locker, you need a pump that can mount out of the bilge. The Whale Gulper 320 installs high and dry, self-primes, and moves graywater through non-choke valves without an internal filter screen to clog.The pump head supports 3/4" (19mm) or 1" (25mm) hose connection and is rated at a 300 GPH flow rate. It moves bilge and graywater out through common hose sizes, so water clears without replumbing the whole run.
When you leave the dock or step away from the slip, rising water does not wait. This 500 GPH Sahara Mk2 automatic pump activates as levels increase and maintains steady discharge in tight compartments.Coast Guard Rule 33 CFR 183.425 Bilgepump standards: ABYC H-22, ISO 8849, ISO 15083 Ignition protection standards: ABYC C-1500, ISO 8846 Marine, U.S. Coast Guard Rule 33 CFR 183.410 Approvals: NMMA approved listing, CE, RCM, UKCA Warranty: 3-Year
Get ultimate peace of mind when you're out on the lake and when you're docked. Submersible, motorized pump with built-in float switch automatically removes excess water from the bilge wells in your boat so you can focus on relaxing.Automatic BilgePump There are 3 types of bilgepumps available: manual, non-automatic, and automatic. Manual pumps are human-powered, and no one wants to be constantly monitoring their boat and pumping out water on their day off.
When you leave the dock or step away from the slip, you want to know rising water will be handled. This 800 GPH Sahara Mk2 automatic pump activates as levels increase and keeps discharge steady in tight compartments.Coast Guard Rule 33 CFR 183.425 Bilgepump standards: ABYC H-22, ISO 8849, ISO 15083 Ignition protection standards: ABYC C-1500, ISO 8846 Marine, U.S. Coast Guard Rule 33 CFR 183.410 Approvals: NMMA approved listing, CE, RCM, UKCA Warranty: 3-Year
When you leave the dock or step away from the slip, you want to know rising water will be handled. This 1,200 GPH Sahara Mk2 automatic pump activates as levels increase and keeps discharge steady in tight compartments.Coast Guard Rule 33 CFR 183.425 Bilgepump standards: ABYC H-22, ISO 8849, ISO 15083 Ignition protection standards: ABYC C-1500, ISO 8846 Marine, U.S. Coast Guard Rule 33 CFR 183.410 Approvals: NMMA approved listing, CE, RCM, UKCA Warranty: 3-Year
Use this submersible, motorized bilgepump to remove excess water from the bilge wells in your boat to keep you afloat. Wire to on/off switch (sold separately) for operation or pair with float switch (sold separately) for automatic functioning.If your bilgepump has gone bad and you need to replace it, installing a new one should be as simple as disconnecting the old pump and connecting this new one in its place.
We do have the parts you need in order to run your Coleman stove from your trailer's quick disconnect, but you will also need a t-fitting to go with the hose. The reason you mentioned the stove has its own regulator; but your trailer's quick…
The Bottom Support Plate for 2-1/4" OD A-Frame Jacks - 5,000 lbs #JSP-100 you mentioned is 1/8" thick, has a hole diameter of 2.29", 8-3/4" long at the back, 5-1/2" long at the front, the diagonal sides are 3-7/8", and…
The mount itself and the bolts that are included with the Replacement Mounting Hardware #Y8860040 will allow you to attach your Yakima PowderHound carrier to crossbars that are up to 3-7/8" wide or 1-1/4" tall. The longer bolts for…
Just the clip on the end of the Replacement Operator #BV0115-04 is not available separately. Only option is an all new operator with the #BV0115-04 you referenced.
Hello Gregg, I think I can help shed some light on what is going on. Basically, there are two ways to stop surge brakes from actuating when backing up the trailer. The first and most popular way to do this is to use a surge brake actuator with a…
Hello Keith, Yes, on an adapter like the Wesbar Adapter - 7-Way RV to 4-Way or 5-Way Flat #707250 the lights will still be powered the same way, and that includes the reverse lights.
Hey Scott! The Dexter DX6.6 Drop-N-Go Brake Actuator #DX79UR is not available with a solenoid since it was designed to be used with free-backing brakes. If you want an electric lockout you will have to add a solenoid #T4748800 to the brake actuator.…
We currently have 3 different trailer jack support plates. I have included other dimensions in the included photos except for #BDSPB50 which was not available. #DL22763 is 1/8 inch thick. #BD003135 is 1/8 inch thick. #BDSPB50 is 1/8 inch thick. The…
The Replacement 42" Cable for Breakaway Switch from Bright Way Group, #3802350, will fit most models of ESCO break away switches. If you don't want to take a chance on it not fitting, I would instead recommend replacing the switch with part…
For your trailer hub that has bearing numbers #L44649 and a bolt pattern of 5 on 4-1/2 inch the trailer hub part #AKIHUB-545-2-1K that you referenced would be the correct hub. It comes with the correct grease seals as well. For additional seals…
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
In order to actuate the trailer brakes, you'd need a brake controller installed in the vehicle and a 6 or 7-way trailer connector. A 4 pole flat wiring harness like the #18002 you'd looked at carries 4 circuits- right turn/brake lamp, left…
When water starts building faster than you can manage by hand, you need more than a manual pump. Designed for demanding conditions, this bilgepump focuses on durability, efficiency, and consistent performance to move water out fast.Built for the BilgeBilges are not gentle environments. This pump is designed to hold up against hull pounding, vibration, and repeated exposure to oil, detergents, and hose plasticizers.
Standing water in the bilge adds weight and affects stability. The Tsunami MK2 500 GPH Manual BilgePump moves water efficiently while the patented X-Air impeller forces trapped air from the system to help maintain steady operation in freshwater use.Built for Tight, Real-World Bilge Access Bilge compartments are cramped, wet, and rarely convenient. This Mk2 pump is designed around faster access, with a true single-handed, twist-out motor cartridge that lets you inspect and clear debris without removing the entire pump assembly.
Use this submersible, motorized bilgepump to remove excess water from the bilge wells in your boat to keep you afloat. Wire to on/off switch (sold separately) for operation or pair with float switch (sold separately) for automatic functioning.If your bilgepump has gone bad and you need to replace it, installing a new one should be as simple as disconnecting the old pump and connecting this new one in its place.
When water starts building faster than you can manage by hand, you need more than a manual pump. Designed for demanding conditions, this bilgepump focuses on durability, efficiency, and consistent performance to move water out fast.Built for the BilgeBilges are not gentle environments. This pump is designed to hold up against hull pounding, vibration, and repeated exposure to oil, detergents, and hose plasticizers.
When water starts collecting and power is not an option, a hand pump provides a way to move it out. This 24" manual bilgepump uses steady, hands-on control to clear water, making it a practical backup for small boats and unexpected situations.Features to know about Built for Those Moments You Plan Around Electric bilgepumps handle most day-to-day situations, but they are not the only answer. A hand bilgepump is the tool you keep for the moments when power is unavailable, a pump fails, or water needs to be moved right now.
Standing water in the bilge adds weight and affects stability. The Tsunami MK2 800 GPH Manual BilgePump moves water efficiently while the patented X-Air impeller forces trapped air from the system to help maintain steady operation in freshwater use.Built for Tight, Real-World Bilge Access Bilge compartments are cramped, wet, and rarely convenient. This Mk2 pump is designed around faster access, with a true single-handed, twist-out motor cartridge that lets you inspect and clear debris without removing the entire pump assembly.
When water finds its way into your kayak, this 18" hand bilgepump gives you a fast, simple way to clear it out. Designed for tight cockpits and human-powered boats, it delivers steady manual control without relying on batteries or wiring.Waves hit. The ergonomic hand grip helps the pump stay afloat, so one slip doesnt turn into a sinking tool and a longer swim. Specs Measurements: Pump length: 18" Performance: Flow rate: up to 8 GPM Operation and Use: Operation: manual, hand-operated Use: water removal from kayaks, canoes, and small fishing boats Construction: Material: impact-resistant plastic
When shower sump water backs up in a cramped locker, you need a pump that can mount out of the bilge. The Whale Gulper 320 installs high and dry, self-primes, and moves graywater through non-choke valves without an internal filter screen to clog.It keeps operating through those gaps, so you are not treating a dry moment like a failure. 24V Power and Wiring Specifications Bilge and graywater systems fail fast when the electrical side is installed incorrectly. This pump runs on 24V DC, calls for a 5 amp fuse, and specifies 16 AWG cable size.
Compact, manual bilgepump lets you remove excess water from the bilge of your small boat, kayak, or canoe. Handle plunger is simple to use and allows fast pumping. ... Features: Hand-operated pump lets you remove water from your kayak, canoe, or other small boat Handle plunger provides fast and easy pumping Versatile outlet pipe allows you to attach hose without fittings or plumbing 1-5/16" Diameter hose included Molded plunger provides comfortable grip Durable polypropylene is lightweight and portable Specs: Dimensions: Pump length: 25" Barrel diameter: 1-5/16" Hose diameter: 1-5/16" 2-Year limited warranty
Compact, manual bilgepump lets you remove excess water from the bilge of your small boat, kayak, or canoe. Mount to flat surface for easy operation. Diaphragm moves up to 5.3 gallons per minute.Features: Hand-operated pump lets you remove water from your kayak, canoe, or other small boat Great to have in an emergency in case your motorized bilgepump goes out Easy installation - mount to bulkhead or deck with 4 screws (not included) Can be mounted horizontally or vertically - just remove clamping ring to rotate head and handle Simply attach hoses (sold separately) with included fittings Connects to standard NPT connections - includes hose barb fittings for 1-1/2" hoses too Molded handle provides comfortable grip Constructed of durable, lightweight polypropylene Specs: Overall dimensions: 12-15/16" long x 4-5/16" wide x 3-15/16" tall Ports: Inlet: 1-1/2" male NPT Outlet: 1-1/2" male NPT Mounting hole pattern (center to center): 4-5/16" long x 4-5/16" wide Flow: 5.3 gallons per minute (GPM) 4-Year limited warranty
Use this submersible, motorized bilgepump to remove excess water from the bilge wells in your boat to keep you afloat. Wire to on/off switch (sold separately) for operation or pair with float switch (sold separately) for automatic functioning.If your bilgepump has gone bad and you need to replace it, installing a new one should be as simple as disconnecting the old pump and connecting this new one in its place.
Filters
