Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hi Nick, unfortunately we don't have anything with bolt holes that are 9-3/4" apart on center, just 9-1/2" apart, so you may want to measure to get as exact as possible. Also, does your axle have a number on it, either 10 or 11, just…
view full answer...Hi Gary; it looks like your PD4575K18LS8 is a slightly older model from before they added the output mode switch. It is very clear that it is not there from your picture. Since there is no way to add the switch you have two options to make it lithium…
view full answer...The Replacement Lithium Converter for Progressive Dynamics 4500 Series RV Power Control Center #PD4575LICSV that you referenced is a dual fan setup.
view full answer...Since you're wanting to replace just the converter section of your power center with a lithium compatible converter you'll want to use the Replacement Lithium Converter for Progressive Dynamics 4500 Series RV Power Control Center - 75 Amp…
view full answer...You would not be able to charge your battery through the wiring on your 4-way trailer connector. Since your truck has a 7-way connector, you could maintain the power to the battery but not charge it. To begin, you would need to cut off your 4-way…
view full answer...According to Go Power, their #GP44FR RV Battery Monitor Kit is indeed compatible with Lithium batteries. I've linked to a product description video for the monitor kit.
view full answer...Yes, the Go Power RV Battery Monitor Kit part #GP44FR does pull power from the battery in which it receives a reading from. That said, the power draw is very small and insignificant therefore won't affect battery life.
view full answer...I attached pictures that show how the switches of the Bulldog Powered Jack #BD500187 get wired.
view full answer...The Go Power Industrial Pure Sine Wave Inverter Charger, #34275013 should be installed using 4/0 or larger wire. Your currently installed converter needs to be supported with wiring that supports this. We have the Installation Kit for Go Power…
view full answer...The best way to power the interior lights in your trailer is with its own independent battery. You will not want to use the breakaway battery. The breakaway battery is only designed to operate the breakaway and will drain extremely quickly,…
view full answer...When using a weight distribution system you will have nearly the same turning ability as you would without a weight distribution system in most cases. The difference is only slight when using a system like the Equal-i-zer #EQ37120ET where other…
view full answer...I went out to the warehouse and pulled an RV Euro Style Interior Single Ceiling Light with Built-In Switch, #RVIL21, to determine how the lens is removed. There are 4 tabs, 1 at each corner, that hold the lens onto the base. You will want to squeeze…
view full answer...Filters
1219 results
Vehicle Fit
Fit 2024 Mercedes-Benz GLS