Redarc The Manager30 Battery Management System with Lithium Profile and Color Display - Bluetooth

Video Transcript for Review of Redarc Battery Charger - Battery Charger and Display - RED93FR

Jeff Hello, everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at this RedVision Manager30 battery management system with the lithium profile and the color display. Now, this is a state of the art battery management system that'll charge and maintain your auxiliary batteries. So, this is ideal for RV and marine applications, caravans, and camper trailers with multiple battery banks. It does include everything I got laid out here on the table.

The main unit, the power cable, the battery sensor, the output connector, the nice RedVision display with the mounting brackets, the 16 foot long canvas cable, and a nice manual that'll describe how this connects and how it operates. Now, this will incorporate AC, DC, and other solar inputs to charge multiple auxiliary batteries simultaneously. It is designed to work on traditional lead acid, gel, calcium, and AGM batteries. And it does include a lithium profile to let you charge the LiFePO4 batteries which are the lithium iron phosphate batteries. Now, this will operate like six products in one.

And it'll operate as an auxiliary battery charger, 110 volt charger, a solar regulator, a battery isolator, a load disconnect controller, and a remote battery monitor. I did wanna zoom in on the RedVision display right here. This is what'll allow you to control multiple onboard devices such as turning lights, inverter, water pumps, and other loads such as TVs, electric steps, and fridges. Does also provide you with the ability to monitor up to six separate water levels, temperatures. And when this is paired with this Manager30 unit, allows you to monitor your battery power consumption and storage through the in-vehicle mounted display right here or you can even download the RedVision app on your Android or iOS device.

When you download it, that will provide the same data and control that's available that's on this display monitor, and you'll have it right in the palm of your hand with your mobile phone. Now, the solar is prioritized over other sources for maximum efficiency. Now, the battery sensor which is this unit right here, this allows charging of your non-lithium auxiliary batteries in freezing temperatures. Again, the application for this kit is all vehicles and alternator systems including the variable voltage alternators. System output on this is 12 volts DC.

The input or operating voltage is 110 volts AC, 9 volts to 32 volts DC. Current output, 30 amps. Output power, 520 watts. Input fuse rating is 50 amps. Output fuse rating is 40 amps. And the last thing I wanna do is give you some measurements on the unit and on the display. So, the measurement on this unit, I'm gonna measure including these mounting brackets on the edge. So, the overall length is 17 1/2 inches. The width on it, let's turn it this way. And we'll go ahead and, width is gonna be right at 7 1/4 inches. And then, the overall height when it's mounted from the bottom to the very top is gonna be right at three inches tall. Now, on the display, this display unit. Let's get the bracket too. We'll get it all together. So, the width of it, it's gonna be right at seven inches wide. Height of it is right at 4 1/4 inches tall. And the total depth or the total depth with the brackets, right at 3/4 of an inch. But that should do it for the review on this RedVision Manager30 battery management system with the lithium profile and the color display..