This short cable is capable of carrying 50 amps for connecting Redarc's MIDI fuse kits to a positive battery terminal. The short length combined with the fuse kit provide protection of the wiring connected and minimizes voltage drop.Features: Short cable carries 50 amps for connecting Redarc MIDI fuse kits to a battery positive terminal Works with Redarc fuse kits RED76FR, RED86FR, 331-FK60, and 331-FK40 (sold separately) Provides protection of the wiring connected and minimizes voltage drop Compatible with all Redarc BCDC, Manager30, and RedVision products Can be used on both start and auxiliary batteries Specs: Wire gauge: 7 AWG Length between lug centers: 5-29/32" Current rating: 50 amps Battery end lug hole diameter: 5/16" (M8) Fuse end lug hole diameter: 3/16" (M5)
Keep your powersport battery charged with these easy-grip clamps designed to fit round, square, and flat posts. SAE connector with rubber seal plugs directly into OptiMate battery chargers. ... Features: Replaces the SAE to battery clamp cable for your OptiMate battery charger Designed to fit round, square, and flat posts Works with OptiMate battery chargers with SAE connector Includes 15-amp in-line fuse to prevent overloads Specs: Application: OptiMate battery chargers Cable length: 20" Gauge: 16 3-Year warranty Note: Fits all OptiMate battery chargers with SAE battery clamps
Fuse kit contains 4 high-quality, 40-amp MIDI fuses with protective holders. Works with Redarc 25-amp BCDC battery charger (331-BCDC1225D). ... Features: Fuse kit ensures that your setup is protected from potentially damaging short circuits or overloads Designed for use with Redarc BCDC 25-amp battery charger (331-BCDC1225D) Fuse holders provide maximum contact with fuse to keep dirt and debris out of contact points Kit includes (4) 40-Amp fuses 2 Fuse holders with hardware 4 Cable crimp lugs 2-Year warranty
Fuse kit contains 4 high-quality, 60-amp MIDI fuses with protective holders. Works with Redarc 40-amp BCDC battery charger (331-BCDC-1240D). ... Features: Fuse kit ensures that your setup is protected from potentially damaging short circuits or overloads Designed for use with Redarc BCDC 40-amp battery charger (331-BCDC1240D) Fuse holders provide maximum contact with fuse to keep dirt and debris out of contact points Kit includes (4) 60-Amp fuses 2 Fuse holders with hardware 4 Cable crimp lugs 2-Year warranty
Fuse kit contains 2 high-quality, 30-amp MIDI fuses with protective holders. Works with Redarc 12-amp BCDC battery charger (RED96FR). Fuses protect your setup from potentially damaging overcurrent caused by short circuits or overloads.Features: Fuse kit ensures that your setup is protected from potentially damaging short circuits or overloads Designed for use with Redarc BCDC 12-amp battery charger (RED96FR) Fuse holders provide maximum contact with fuse to keep dirt and debris out of contact points Kit includes (2) 30-Amp fuses 1 Fuse holder with hardware 2 Cable crimp lugs 2-Year warranty
Fuse kit contains 2 high-quality, 23-amp MIDI fuses with protective holders. Works with Redarc 12-amp BCDC battery charger (RED96FR). Fuses protect your setup from potentially damaging overcurrent caused by short circuits or overloads.Features: Fuse kit ensures that your setup is protected from potentially damaging short circuits or overloads Designed for use with Redarc BCDC 12-amp battery charger (RED96FR) Fuse holders provide maximum contact with fuse to keep dirt and debris out of contact points Kit includes (2) 23-Amp fuses 1 Fuse holder with hardware 2 Cable crimp lugs 2-Year warranty
Fuse kit contains 2 high-quality, 100-amp MIDI fuses with protective holders. Designed for use with a Redarc 100-amp Smart Start battery isolator. ... Features: Fuse kit ensures that your setup is protected from potentially damaging short circuits or overloads Designed for use with Redarc 100-amp Smart Start battery isolators (331-SBI12, 331-SBI12D, 331-SBI12KIT, 331-SBI24, 331-SBI24D) Also great for use with powered winch setups Fuse holders provide maximum contact with fuse to keep dirt and debris out of contact points Kit includes (2) 100-Amp fuses 2 Fuse holders with hardware 4 Cable crimp lugs 2-Year warranty
Y-splitter lets you double your SAE connections. Includes 15-amp in-line fuses to protect accessories from overloads. Can be used to power two accessories or to maintain 2 batteries from a single charger.Features: This y-splitter cable doubles your SAE connectors 15-Amp in-line fuses prevent overloads Includes weatherproof rubber seals for SAE connectors and one cap Specs: Input: SAE connector Output: 2 SAE connectors Cord length: 20" Gauge: 18 3-Year limited warranty Note: Requires an SAE battery lead or an SAE outlet to operate (sold separately)
Charge your phone, GPS or other USB device from your motorcycle or ATV's battery. Kit includes battery lead to SAE connector to battery monitor to USB port. Built-in protection turns off USB charging when vehicle is parked.Features: Battery to USB charger kit lets you power your USB devices and keep an eye on your battery status 80" Cable can be routed from battery to where power is needed - handlebar, tank bag, or pannier 3.3 Amp charger adapts to connected device for safe charging USB port stops charging when vehicle is in park to protect your batteryBattery monitor displays status with blinking LEDs USB port easily zip-ties to mounting location Includes weatherproof cap to seal USB port when not in use Kit includes battery lead with in-line 15-amp fuse to SAE cable, and SAE to battery monitor to USB cable Specs: Input: 12V AGM or 12.8V lithium battery Charging amps: 3.3 @ 5 volts Length: 80" 3-Year limited replacement warranty
Maintain the charge on your RV's battery with this dual-input, DC-to-DC smart charger. Unit installs in your vehicle or trailer and pulls power from your solar panels before tapping into the vehicle battery. ... The table below outlines the recommended wire size for a given length of cable: To ensure a low-resistance connection, you will want to use MIDI fuses (331-FK60 - sold separately) when connecting the BCDC to your batteries. For a typical lead acid battery setup, refer to the wiring diagram (shown with fuses and optional LED and solar panel - sold separately) below: For a typical Lithium ion (LiFePO4) battery setup, refer to the wiring diagram (shown with fuses and optional LED and solar panel - sold separately) below:
Keep your trailer's battery charged with this single-input, DC-to-DC smart charger. Unit installs in your vehicle or trailer and pulls power from your vehicle battery to charge your auxiliary battery. ... The table below outlines the recommended wire size for a given length of cable: To ensure a low-resistance connection, you will want to use MIDI fuses (RED76FR or RED86FR - sold separately) when connecting the BCDC to your batteries. For a typical lead acid battery setup, refer to the wiring diagram (shown with fuses and optional LED - sold separately) below: For a typical Lithium ion (LiFePO4) battery setup, refer to the wiring diagram (shown with fuses and optional LED - sold separately) below:
Maintain the charge on your RV's battery with this dual-input, DC-to-DC smart charger. Unit installs in your vehicle or trailer and pulls power from your solar panels before tapping into the vehicle battery. ... The table below outlines the recommended wire size for a given length of cable: To ensure a low-resistance connection, you will want to use MIDI fuses (331-FK60 - sold separately) when connecting the BCDC to your batteries. For a typical lead acid battery setup, refer to the wiring diagram (shown with fuses and optional LED and solar panel - sold separately) below: For a typical Lithium ion (LiFePO4) battery setup, refer to the wiring diagram (shown with fuses and optional LED and solar panel - sold separately) below:
Maintain the charge on your RV's battery with this dual-input, DC-to-DC smart charger. Unit installs in your vehicle or trailer and pulls power from your solar panels before tapping into the vehicle battery. ... The table below outlines the recommended wire size for a given length of cable: To ensure a low-resistance connection, you will want to use MIDI fuses (331-FK40 - sold separately) when connecting the BCDC to your batteries. For a typical lead acid battery setup, refer to the wiring diagram (shown with fuses and optional LED and solar panel - sold separately) below: For a typical Lithium ion (LiFePO4) battery setup, refer to the wiring diagram (shown with fuses and optional LED and solar panel - sold separately) below:
This 100-amp dual-battery isolator pulls power from your start battery to charge your auxiliary battery. Isolator switches off to prevent dead battery if start battery voltage drops too low. ... Features: Battery isolator protects start battery from auxiliary drain in multiple battery setups Transfers charge from start battery to auxiliary battery once start battery gains charge from alternator Stops charge transfer if start battery voltage drops too low, preventing excessive discharge Override wire allows for emergency starts and simple fault detection Attach to a switch (sold separately) to manually reverse charge and jump-start a dead start battery Connect to an LED (not included) that can be mounted in your cab for easy viewing of diagnostics Silver contact points ensure long life and corrosion resistance Compact design allows for versatile installation Mount the isolator in a convenient location near the start battery Plug-and-play wiring kit includes: (2) 7-3/4" Long and (2) 70" long positive battery cables 29-1/2" Long ground wire (2) 60-Amp fuses (2) Fuse holders with mounting nuts (2) Battery terminals with protectors Made in Australia Specs: Application: vehicles with standard or temperature-compensating alternators Maximum continuous current: 100 amps Standby current: less than 5 mA Output connection: 12V DC Overall dimensions: 3-1/8" long x 2-15/16" wide x 2-1/2" tall Wire gauge: 6 2-Year warranty With this dual-battery isolator, you can transfer power from your start battery to an auxiliary battery without draining your start battery.
This black self-fusing tape is ideal for almost any application requiring a waterproof seal and is an excellent insulator with high dielectric strength.Features: Forms a permanent bond that is both airtight and waterproof Leaves no residue when removed Fuses upon itself when wrapped Cures completely within 24 hours Stretches to 300% of original length Insulates 8,000 volts per layer to protect wires and splices Provides alternative to heat shrink tubing Resists UV rays, oil, and corrosive chemicals Specs: Applications include marine connections, battery terminals, automotive hoses, color coding, cable splices, and tool-grip enhancement Temperature range: 65 F to 500 F (-53.89 C to 260 C) Meets or exceeds UL standard 510 Meets MIL-I-46852C Type II standard Quantity: 1 roll Made in the USA 1-Year limited warranty
This red self-fusing tape is ideal for almost any application requiring a waterproof seal and is an excellent insulator with high dielectric strength.Features: Forms a permanent bond that is both airtight and waterproof Leaves no residue when removed Fuses upon itself when wrapped Cures completely within 24 hours Stretches to 300% of original length Insulates 8,000 volts per layer to protect wires and splices Provides alternative to heat shrink tubing Resists UV rays, oil, and corrosive chemicals Specs: Applications include marine connections, battery terminals, automotive hoses, color coding, cable splices, and tool-grip enhancement Temperature range: 65 F to 500 F (-53.89 C to 260 C) Meets or exceeds UL standard 510 Meets MIL-I-46852C Type II standard Quantity: 1 Made in the USA 1-Year limited warranty
A battery that sits too long can leave you stuck when you need it most. The OptMate 1 DUO charges and maintains 12V lead-acid and lithium batteries automatically, helping keep your vehicles ready to start.Specs Electrical Input: AC to DC Output voltage: 12V Output current: 0.6 amps Compatible battery voltage: 12V lead-acid, 12.8V / 13.2V lithium Compatible battery types: STD, AGM, GEL, LiFePO4 Recommended battery capacity: 2Ah to 15Ah Maximum recharge capacity: up to 15Ah within 24 hours Fuse rating: 15 amps Connections Connector type: SAE 2-pin with weatherproof cap AC lead length: 6' Battery lead length: 20" Battery clip lead length: 20" Construction Case type: weather-resistant with wall mounts Warranty 3-Year limited
Compact smart charger draws power from a wall outlet to charge and maintain batteries on cars, motorcycles, lawnmowers, ATVs, tractors, trucks, SUVs, and boats. Force mode revives dead batteries. Charges lead-acid and lithium-ion batteries.Just attach the battery clamps to the vehicle's battery terminals, select a charging mode to match your application, and wait for the LED indicator to signal that the battery is completely charged.
Submersible, on-board smart charger draws power from a wall outlet to charge and maintain up to (3) 12V batteries at 10-amps. Fully-sealed, waterproof construction is ideal for marine applications. Saltwater tested and ignition protected for safety.Features: On-board AC-to-DC smart charger quickly charges and maintains up to 3 batteries Perfect for boats, trolling motors, generators, electric vehicles, and industrial equipment 3 Battery banks allow multiple 12V batteries to be charged simultaneously Provides full charge output even with low or varying AC current input Multiple battery profiles let you charge a variety of battery types 12V Modes - normal, AGM, and lithium-ion, Force mode - charge dead batteries below 1-volt Multi-stage charging algorithm charges 2x faster than traditional chargers without overcharging Analyzes battery condition to provide a customized charge Built-in battery desulfator restores lost battery capacity Heavy-duty 3/8" eyelet connectors provide maximum contact with terminals Built-in 15-amp fuses protect electronics from dangerous overloads Completely sealed, waterproof design is fully submersible - perfect for marine applications Tested to resist saltwater corrosion AC port plug (sold separately) creates a connection point for easy access to AC power Specs: Application: 12V batteries up to 230 amp-hours Battery types supported: wet cell, gel cell, AGM, enhanced flooded, maintenance-free, and Lithium-ion Lithium-ion batteries must have battery management systems (BMS) Number of battery banks: 3 Maximum charging amperage: 30 amps 10 amps per battery bank Eyelet cable length: 72" AC cable length: 72" Working voltage: 120 - 240 VAC (50 - 60 Hz) Maximum power consumption: 450 watts 150 watts per battery bank Low voltage detection rating: 1-volt IP rating: 68 Dimensions: 10-1/2" long x 8-1/8" wide x 2-13/16" thick Weight: 12.8 lbs 3-Year limited warranty The rugged NOCO Genius GENPRO series on-board smart charger quickly charges and maintains your 12-volt lead-acid or lithium-ion batteries.
Submersible, on-board smart charger draws power from a wall outlet to charge and maintain up to (2) 12V batteries at 10-amps. Fully-sealed, waterproof construction is ideal for marine applications. Saltwater tested and ignition protected for safety.Features: On-board AC-to-DC smart charger quickly charges and maintains up to 2 batteries Perfect for boats, trolling motors, generators, electric vehicles, and industrial equipment 2 Battery banks allow multiple 12V batteries to be charged simultaneously Provides full charge output even with low or varying AC current input Multiple battery profiles let you charge a variety of battery types 12V Modes - normal, AGM, and lithium-ion, Force mode - charge dead batteries below 1-volt Multi-stage charging algorithm charges 2x faster than traditional chargers without overcharging Analyzes battery condition to provide a customized charge Built-in battery desulfator restores lost battery capacity Heavy-duty 3/8" eyelet connectors provide maximum contact with terminals Built-in 15-amp fuses protect electronics from dangerous overloads Completely sealed, waterproof design is fully submersible - perfect for marine applications Tested to resist saltwater corrosion AC port plug (sold separately) creates a connection point for easy access to AC power Specs: Application: 12V batteries up to 230 amp-hours Battery types supported: wet cell, gel cell, AGM, enhanced flooded, maintenance-free, and Lithium-ion Lithium-ion batteries must have battery management systems (BMS) Number of battery banks: 2 Maximum charging amperage: 20 amps 10 amps per battery bank Eyelet cable length: 72" AC cable length: 72" Working voltage: 120 - 240 VAC (50 - 60 Hz) Maximum power consumption: 300 watts 150 watts per battery bank Low voltage detection rating: 1-volt IP rating: 68 Dimensions: 8-1/8" long x 6-1/2" wide x 3" thick Weight: 7.2 lbs 3-Year limited warranty The rugged NOCO Genius GENPRO series on-board smart charger quickly charges and maintains your 12-volt lead-acid or lithium-ion batteries.
Submersible, on-board smart charger draws power from a wall outlet to charge and maintain up to (3) 12V batteries at 5-amps. Fully-sealed, waterproof construction is ideal for marine applications. Saltwater tested and ignition protected for safety.Features: On-board AC-to-DC smart charger quickly charges and maintains up to 3 batteries Perfect for boats, trolling motors, generators, electric vehicles, and industrial equipment 3 Battery banks allow multiple 12V batteries to be charged simultaneously Provides full charge output even with low or varying AC current input Multiple battery profiles let you charge a variety of battery types 12V Modes - normal, AGM, and lithium-ion, Force mode - charge dead batteries below 1-volt Multi-stage charging algorithm charges 2x faster than traditional chargers without overcharging Analyzes battery condition to provide a customized charge Built-in battery desulfator restores lost battery capacity Heavy-duty 3/8" eyelet connectors provide maximum contact with terminals Built-in 7.5-amp fuses protect electronics from dangerous overloads Completely sealed, waterproof design is fully submersible - perfect for marine applications Tested to resist saltwater corrosion AC port plug (sold separately) creates a connection point for easy access to AC power Specs: Application: 12V batteries up to 120 amp-hours Battery types supported: wet cell, gel cell, AGM, enhanced flooded, maintenance-free, and Lithium-ion Lithium-ion batteries must have battery management systems (BMS) Number of battery banks: 3 Maximum charging amperage: 15 amps 5 amps per battery bank Eyelet cable length: 72" AC cable length: 72" Working voltage: 120 - 240 VAC (50 - 60 Hz) Maximum power consumption: 220 watts Low voltage detection rating: 1-volt IP rating: 68 Dimensions: 7-15/16" long x 6-1/2" wide x 2-1/4" thick Weight: 5.76 lbs 3-Year limited warranty The rugged NOCO Genius GEN series on-board smart charger quickly charges and maintains up to (3) 12-volt lead-acid and lithium-ion batteries, simultaneously.
Stay off-grid longer. Charge your trailer battery as you drive, check power from your phone, and keep your gear running so you can settle in, relax, and enjoy your favorite camping spot without worrying about power.Everything You Need in One Box: Includes a charger, battery monitor, fuses, and has a built-in solar regulator and battery isolator. Plug In and Go: Uses your 7-pin trailer plug for a quick setup.
Compact smart charger draws power from a wall outlet to charge and mantain up to 4 batteries at 2-amps. Great for motorcycles, ATVs, snowmobiles, lawn mowers, and other equipment. 4 Charging modes for 6V and 12V lead-acid and lithium-ion batteries.As the battery nears full charge, the charger enters the absorption stage and delivers small amounts of current to limit battery gassing and safely bring the battery to 90-percent capacity.
Submersible, on-board smart charger draws power from a wall outlet to charge and maintain up to (2) 12V batteries at 5-amps. Fully-sealed, waterproof construction is ideal for marine applications. Saltwater tested and ignition protected for safety.Features: On-board AC-to-DC smart charger quickly charges and maintains up to 2 batteries Perfect for boats, trolling motors, generators, electric vehicles, and industrial equipment 2 Battery banks allow multiple 12V batteries to be charged simultaneously Provides full charge output even with low or varying AC current input Multiple battery profiles let you charge a variety of battery types 12V Modes - normal, AGM, and lithium-ion, Force mode - charge dead batteries below 1-volt Multi-stage charging algorithm charges 2x faster than traditional chargers without overcharging Analyzes battery condition to provide a customized charge Built-in battery desulfator restores lost battery capacity Heavy-duty 3/8" eyelet connectors provide maximum contact with terminals Built-in 7.5-amp fuses protect electronics from dangerous overloads Completely sealed, waterproof design is fully submersible - perfect for marine applications Tested to resist saltwater corrosion AC port plug (sold separately) creates a connection point for easy access to AC power Specs: Application: 12V batteries up to 120 amp-hours Battery types supported: wet cell, gel cell, AGM, enhanced flooded, maintenance-free, and Lithium-ion Lithium-ion batteries must have battery management systems (BMS) Number of battery banks: 2 Maximum charging amperage: 10 amps 5 amps per battery bank Eyelet cable length: 72" AC cable length: 72" Working voltage: 120 - 240 VAC (50 - 60 Hz) Maximum power consumption: 145 watts Low voltage detection rating: 1-volt IP rating: 68 Dimensions: 7" long x 5-5/8" wide x 2-1/4" thick Weight: 4.17 lbs 3-Year limited warranty The rugged NOCO Genius GEN series on-board smart charger quickly charges and maintains up to (2) 12-volt lead-acid and lithium-ion batteries, simultaneously.
Filters
