This multi-function, vehicle-end connector converts any 4-way flat, vehicle-end plug to a combination 7-way outlet and 4-pole flat outlet. Features an integrated backupalarm.Features: Connects to 4-way flat plug on your vehicle Requires additional wiring for use of brake, power and accessory leads Supplies 7-blade RV and 4-wire flat trailer connections Sounds alarm when vehicle is in reverse Constructed of durable plastic Specs: Yellow wire is for reverse lights Blue wire is for brakes Black wire is for 12 volt power White wire is ground 4-Way connector plugs into vehicle 4-way connector
Replace your Ford's or GM's OEM connector with this multi-function, vehicle-end connector. Features 7-way outlet, 4-pole flat outlet and an integrated backupalarm.Features: Replaces OEM 7-pole trailer connector on Ford and GM trucks Supplies 7-blade RV and 4-wire flat trailer connections Sounds alarm when vehicle is in reverse Constructed of durable plastic Specs: Applications: 1999-2014 Chevrolet Silverado, 1999-2014 GMC Sierra and 1999-2012 Ford F-250, F-350, F-450 and F-550 trucks 1-Year warranty
This heavy-duty back-upalarm is designed as a compact and low-cost solution for the largest construction and mining vehicles, graders, dumps, crawlers, tractors, belly dumps, etc. ... Dimensions: 5" wide x 4.7" deep x 3.1" tall Mounting: 2" x 4 -1/4" centers Net weight: 3.0 lbs Adjustable sound levels: 97dB, 107dB, 112dB(A) +/- 4 @ 4' Voltage: 9 to 24 volts Operating temperature: -40 F to 170 F (-4.44 C to 76.67 C) Current draw: less than 1 amp 1-Year limited warranty 41-761 Pollak Heavy Duty BackupAlarm - 9 to 24 Volts - Less than 1 Ampere - Adjustable Levels - 97 Decibels to 112 Decibels
4-1/4" Diameter round. Backupalarm provides an audible alert to anyone who might be behind your truck or van. Alert starts beeping when vehicle is put into reverse. ... Features: Backupalarm provides an audible alert to anyone who might be behind your truck or van Beeping starts when vehicle is put into reverse Compatible with 12V and 24V DC systems Mounts to horizontal or vertical surface with included grommet Requires 4-1/4" diameter cutout for installation Meets SAE J994 Type C specifications Made in the USA Specs: Overall dimensions: 4-1/4" diameter x 1-5/8" deep Decibel level: 97 Input voltage: 12V - 48V
If it is a 1000 psi then it would be the Hydrastar for drum brakes. The newest one is #HBA-10 and it has different wire colors, see picture. So you know that black is 12 volt power in and white is the ground. Blue/white goes to the break away switch.…
The reverse light pin on a traditional 7-way trailer connector, like part #PK11893 or a factory connector if that's what you have on your 2018 Ram, is the center pin. Take a look at the picture I attached that shows all the pin functions. To add…
You can add a 7-Way trailer connector and retain the use of a 4-Way as well by installing #37185. The 4-Way you have will plug into the 37185 and the remaining wires would have to be hardwired in. The white wire grounds to the truck frame. Black is…
The Custer 40-LED Light Bar w/ Controller Box - Magnet/Suction Cup Mount - 23" Long #STR-40-S will work well for your Hurst and funeral services. The magnets will not come into play with a fiberglass roof, but the suction cups will keep the…
Yes the Bearing Buddy part #BB1980A-SS is correct for the Dexter hub you have #8-247-50UC3 and then for the bearing kit part #BK2-100 is also correct! You made my job easy.
When using an EZ-Lube hub, such as hub/drum assembly #AKHD-545-2-EZ-2K, on an EZ-Lube spindle it is not necessary to also use Bearing Buddy bearing protectors. An EZ-Lube spindle, such as part #TRU44FR, has a grease zerk fitting to allow you to pump…
I reached out to my contact at Dexter and was able to get the wheel bearing numbers you need for your 1999 Jayco Pop-Up Camper. The inner bearing is #L68149 and the outer bearing is #L44649. I recommend getting the complete kit which is Bearing Kit…
EZ Lube spindles are generally preferred over Bearing Buddy setups. The EZ lube allows you to insert grease down the middle of the spindle easily which is basically the best option aside from removing the hub and taking it all apart and cleaning and…
All of our bearing kits, like the part #BK2-100 that was referenced, only include the inner/outer bearings, grease seal, and cotter pin/washer but I can help you get the other parts that you are needing as well. For 10" x 2-1/4" brakes we…
Yes you can use a Bearing Buddy on your current axle setup but you'll have to remove the zerk/grease fitting. What you have now is an EZ lube spindle which allows you to push grease through the middle of the spindle but you can install a Bearing…
Any time your vehicle is placed in reverse, whether you are towing or not, the alarm will sound on the Curt Trailer Connector Adapter with Backup Alarm item #C57102. To have the same connector without the beeping sound you will want the Curt Trailer…
You can absolutely store the Hopkins Plug-In Simple Vehicle Wiring Harness #HM11143865 in the hatch of your 2013 Subaru Outback when you aren't using it instead of routing it outside the vehicle. The connector end will be long enough to hang…
Rugged, compact, light- to medium-duty back-upalarm replaces large and bulky alarms currently used on light- and medium-duty trucks, dump trucks, motor homes, campers, electric forklifts, and other similar applications. 97dB single sound level.
4-1/4" Diameter round. Backupalarm provides an audible alert to anyone who might be behind your truck or van. Alert starts beeping when vehicle is put into reverse. ... Features: Backupalarm provides an audible alert to anyone who might be behind your truck or van Beeping starts when vehicle is put into reverse Compatible with 12V and 24V DC systems Mounts to horizontal or vertical surface with included grommet Requires 4-1/4" diameter cutout for installation Meets SAE J994 Type F specifications Made in the USA Specs: Overall dimensions: 4-1/4" diameter x 1-5/8" deep Decibel level: 102 Input voltage: 12V - 24V
Medium- to heavy-duty back-upalarm for use on off-highway trucks, dump trucks, loaders, cranes, backhoes, etc. Patent-pending dome speaker has self-cleaning feature to expel contaminants, such as concrete dust. 107dB single sound level.Features: Meets extreme requirements of off-highway equipment Rugged, glass-filled nylon housing Self-cleaning feature (patent pending) expels contaminants, such as concrete dust Steam-cleanable or pressure-washable Low-current, high-efficiency dome speaker Can be used on positive- and negative-ground vehicles Voltage spike-protected Reverse polarity-protected Solid-state electronics Conforms to SAE J994 type B Meets state, federal, OSHA , Bureau of Mines, and US Army Corps of Engineers' requirements Meets all European standards for on- and off-road vehicles (CE & E-Mark certified) Specs: Applications: light- to medium-duty vehicles where a louder warning level is required Dimensions: 5" wide x 3.25" deep x 3" tall Wire Leads: 12" Mounting: (2) slots 0.75" long x 0.25" wide and (2) slots 1" long x 0.25" wide on 4.25" centers Net weight: 1.2 lb Sound level: 107dB(A) +/- 4 @ 4' Voltage: 12 to 24 volts Current draw: less than 0.3 amp 1-Year limited warranty 41-851 Medium Duty to Heavy Duty BackupAlarm - 12 Inch Wire Leads - Self Cleaning - 12 to 24 Volts - 107 Decibels Replaces 41-751
Back-upalarm produces a low frequency tone to warn pedestrians and other drivers that your vehicle is backing up or in reverse. Epoxy-sealed housing protects against moisture, dust, and vibration. ... Features: Back-upalarm produces a low frequency tone to warn pedestrians and other drivers that your vehicle is backing up or in reverse Epoxy-sealed housing protects against moisture, dust, and vibration Works in temperatures between -22 F and 122 F Durable nylon construction Compatible with 12V and 24V DC Mounts to surface of vehicle - hardware not included Self-grounding design grounds through mounting hardware Meets OSHA , GSA , the U.S.
Back-upalarm produces a low frequency tone to warn pedestrians and other drivers that your vehicle is backing up or in reverse. Epoxy-sealed housing protects against moisture, dust, and vibration. ... Features: Back-upalarm produces a low frequency tone to warn pedestrians and other drivers that your vehicle is backing up or in reverse Epoxy-sealed housing protects against moisture, dust, and vibration Works in temperatures between -22 F and 122 F Durable nylon construction Compatible with 12V and 24V DC Mounts to surface of vehicle - hardware not included Self-grounding design grounds through mounting hardware Meets OSHA , GSA , the U.S.
Back-upalarm produces a low frequency tone to warn pedestrians and other drivers that your vehicle is backing up or in reverse. Housing protects against moisture, dust, and vibration. ... Features: Back-upalarm produces a low frequency tone to warn pedestrians and other drivers that your vehicle is backing up or in reverse Compatible with 12V and 24V DC Mounts to surface of vehicle - hardware not included Meets SAE J994 regulations Made in the USA Specs: Overall dimensions: 3-1/16" tall x 4" long x 5" wide Distance between mounting holes (center on center): 4-1/8" Tone decibels: 112 dB(A) Limited lifetime warranty
Back-upalarm produces a low frequency tone to warn pedestrians and other drivers that your vehicle is backing up or in reverse. Epoxy-sealed housing protects against moisture, dust, and vibration. ... Features: Back-upalarm produces a low frequency tone to warn pedestrians and other drivers that your vehicle is backing up or in reverse Epoxy-sealed housing protects against moisture, dust, and vibration Works in temperatures between -22 F and 122 F Durable nylon construction Compatible with 12V and 24V DC Mounts to surface of vehicle - hardware not included Self-grounding design grounds through mounting hardware Meets OSHA , GSA , the U.S.
Tow your small trailer with this completely hidden trailer hitch. Remove the ball mount for a fully concealed look when you're not towing. Use the included receiver attachment to mount a bike rack or cargo carrier. Trailer wiring included.Features: Custom-fit trailer hitch lets you tow a trailer, carry a bike rack, or haul a cargo carrier with your vehicle Insert included ball mount to tow a small trailer Attach included receiver to mount a bike rack or cargo carrier Totally hidden design offers a clean, from-the-factory look Cross tube is concealed behind your rear bumper Receiver or ball mount detach with no tools and can be stowed away when not in use Sturdy center block allows secure mounting and easy removal of attachments Tight tolerances prevent jarring back-and-forth movement when you're starting and stopping Integrated lock protects the attachment from theft Durable stainless steel construction resists corrosion Hitch won't affect ground clearance or block your trunk's foot-access sensor Simple, bolt-on installation - no drilling or welding required Uses existing connection points to protect your vehicle's crumple zones Black powder coat finish offers superior rust protection Meets SAE J684 towing safety regulations 4-Way flat trailer connector mounts at the back of your vehicle to power your trailer's signal lights Plugs into your vehicle's wiring to communicate with its computer - ensures cameras, backupalarms, etc. operate normally Made in the USA Specs: Receiver opening: 2" x 2" Maximum gross trailer weight : 3,500 lbs Maximum tongue weight : 350 lbs Not rated for weight distribution systems Ball size: 2" Ball hole diameter: 1" Limited lifetime warranty Note: The included receiver attachment is only for hitch-mounted accessories and cannot be used for towing.
Tow your small trailer with this completely hidden trailer hitch. Remove the ball mount for a fully concealed look when you're not towing. Use the included receiver attachment to mount a bike rack or cargo carrier. Trailer wiring included.Features: Custom-fit trailer hitch lets you tow a trailer, carry a bike rack, or haul a cargo carrier with your vehicle Insert included ball mount to tow a small trailer Attach included receiver to mount a bike rack or cargo carrier Totally hidden design offers a clean, from-the-factory look Cross tube is concealed behind your rear bumper Receiver or ball mount detach with no tools and can be stowed away when not in use Sturdy center block allows secure mounting and easy removal of attachments Tight tolerances prevent jarring back-and-forth movement when you're starting and stopping Integrated lock protects the attachment from theft Durable stainless steel construction resists corrosion Hitch won't affect ground clearance or block your trunk's foot-access sensor Simple, bolt-on installation - no drilling or welding required Uses existing connection points to protect your vehicle's crumple zones Black powder coat finish offers superior rust protection Meets SAE J684 towing safety regulations 4-Way flat trailer connector mounts at the back of your vehicle to power your trailer's signal lights Plugs into your vehicle's wiring to communicate with its computer - ensures cameras, backupalarms, etc. operate normally Made in the USA Specs: Receiver opening: 2" x 2" Maximum gross trailer weight : 3,500 lbs Maximum tongue weight : 350 lbs Not rated for weight distribution systems Ball size: 2" Ball hole diameter: 1" Limited lifetime warranty Note: The included receiver attachment is only for hitch-mounted accessories and cannot be used for towing.
7-11/16" x 3-5/8" Oval. LED trailer tail light with 5 hardwired leads serves 4 main light functions. LumenX optics creates a solid panel of light. Integrated voltage regulation. Recessed mount with built-in flange. Accepts AMP connector.Features: Oval trailer tail light serves 4 functions Works as a turn signal, tail light, brake light, and backup light Cyclops-style design integrates back-up light into tail light LumenX optics creates a solid panel of light that illuminates the entire lens LEDs make great replacements for incandescent lights Can last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Regulated design ensures consistent light output and prevents overheating Red and clear lens over red and white LEDs Compatible with 12V DC systems Recessed mount with built-in plastic flange Mounts in any 360-degree position Accepts industry-standard AMP-style plug (sold separately) DOT compliant Meets FMVSS 108 requirements for automotive lighting Made in the USA Specs: Dimensions: 7-11/16" long x 3-5/8" tall x 1-3/8" deep Diodes: 7 Power draw at 12V Input voltage: 9V - 16V DC 10-Year limited warranty
10-1/8" x 3-1/16" Oval. 4-Function, waterproof light acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface with built-in flange - hardware not included. 4-Wire pigtail. 14 Diodes.Features: Low-profile trailer tail light serves 4 functions Stop light Tail light Turn signal light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens set inside white lens with red and white LEDs Red lens with red LEDs for tail light Clear lens with white LEDs for backup light Compatible with 12V DC systems Mounts on surface of trailer with built-in flange - hardware not included Snap-on, stainless steel trim ring (A68SSB) sold separately 4-Wire pigtail White wire for ground Brown wire for backup light Red wire for brake light and turn signal Black wire for tail light DOT compliant Specs: Overall dimensions: 10-1/8" long x 3-1/16" tall x 1/2" deep Tail light dimensions: 6-3/4" long x 2-1/8" tall Backup light dimensions: 2-1/2" long x 2-1/8" tall Mounting holes: 9-11/16" Apart on center (horizontal) 2-5/8" Apart on center (vertical) Diodes: 14 Power draw at 12.8 volts: Stop/turn signal light: 0.35 amps Tail light: 0.05 amps Backup light: 0.3 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
7-1/2" x 3-1/4" Oval. Waterproof light serves 4 functions: brake, tail, turn, and backup light. Red lens is set inside of clear lens. Mounts on surface of trailer with built-in flange - hardware not included. 4-Wire pigtail. 16 Diodes.Features: Oval trailer tail light serves 4 functions Stop light Tail light Turn signal light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows improved heat distribution and thinner construction LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens set inside white lens with red and white LEDs Red lens with red LEDs for tail light Clear lens with white LEDs for backup light Mounts on surface of trailer with built-in black flange - hardware not included 4-Wire pigtail White wire for ground Brown wire for backup light Red wire for brake light Black wire for tail light DOT compliant Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting Specs: Overall dimensions: 7-1/2" wide x 3-1/4" tall x 3/4" deep Light face dimensions: 6-1/2" wide x 2-1/4" tall Wire length: 8" Diodes: 16 Power draw at 12.8 volts: Stop/turn light: 0.265 amps Tail light: 0.24 amps Backup light: 0.3 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
6-1/2" x 2-3/8" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate lens and housing. Surface mount with built-in flange. ... Features: Oval LED backup light for trailers and utility trucks Certified for backup light function in a 2-lamp system when a pair of lights is installed (second light sold separately) GloLight Series features a brighter outer ring of light with a smooth appearance Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Clear lens over white LEDs Copmatible with 12V DC systems Mounts on surface of trailer with built-in flange - hardware not included Accepts industry-standard 2-prong PL-3 plug (A45CB or A49PB - both sold separately) DOT compliant Meets FMVSS 108 requirements in any 360-degree position Specs: Overall dimensions: 7-1/2" long x 3-5/16" tall x 1-1/8" thick Light dimensions: 6-1/2" long x 2-3/8" tall Diodes: 22 Power draw at 12.8 volts: 0.386 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
6-7/16" x 2-5/16" Oval. 4-Function, waterproof light acts as brake, tail, turn, and backup light. Recessed mount with grommet (sold separately). Accepts 2-prong plug for backup and 3-prong plug for tail light. 16 Diodes.Features: Low-profile trailer tail light serves 4 functions Stop light Tail light Turn signal light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens set inside white lens with red and white LEDs Red lens with red LEDs for tail light Clear lens with white LEDs for backup light Recessed mount with grommet (A70GB - sold separately) Accepts industry-standard plugs (sold separately) 2-Prong plug for backup light function 3-Prong plug for tail light functions DOT compliant Specs: Quantity: 1 light Overall dimensions: 6-7/16" long x 2-5/16" tall x 1-1/2" deep Diodes: 16 Power draw at 12.8 volts: Stop/turn signal light: 0.375 amps Tail light: 0.2 amps Backup light: 0.242 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
10-1/8" x 3-1/16" Oval. 4-Function, waterproof light acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface with built-in flange - hardware not included. 5-Wire pigtail. 14 Diodes.Features: Low-profile trailer tail light serves 4 functions Stop light Tail light Turn signal light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens set inside white lens with red and white LEDs Red lens with red LEDs for tail light Clear lens with white LEDs for backup light Compatible with 12V DC systems Mounts on surface of trailer with built-in flange - hardware not included Snap-on, stainless steel trim ring (A68SSB) sold separately 5-Wire pigtail White wires are for ground connections Brown wire for backup light Red wire for brake light Yellow wire for turn signal Black wire for tail light DOT compliant Specs: Overall dimensions: 10-1/8" long x 3-1/16" tall x 1/2" deep Tail light dimensions: 6-3/4" long x 2-1/8" tall Backup light dimensions: 2-1/2" long x 2-1/8" tall Mounting holes: 9-11/16" Apart on center (horizontal) 2-5/8" Apart on center (vertical) Diodes: 14 Power draw at 12.8 volts: Stop/turn signal light: 0.35 amps Tail light: 0.05 amps Backup light: 0.3 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
4" Round waterproof LED trailer light with 24 diodes provides stop, turn, tail, and back-up functions. GloLight lens creates a solid panel of light. Recessed mount with grommet (sold separately). Weathertight ports accept 2-pin and 3-pin plugs.Features: Combination trailer light serves 4 functions Stop light, turn signal light, tail light, and reverse light GloLight lens creates a solid light pattern with a smooth appearance Sonically sealed, waterproof construction is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Molded plastic housing and durable acrylic lens Red lens over red LEDs White lens over white leds for back-up function Compatible with 12V DC systems Recessed mount with required grommet (sold separately) Weathertight connections accept 3-pin and 2-pin plugs Specs: Dimensions: 4-5/16" diameter x 1-5/8" thick Diodes: 24 Power draw at 12V: Stop/turn light: 0.316 amps Tail light: 0.150 amps Backup: 0.30 amps Lifetime warranty on LEDS Innovative GloLight Design This red LED light serves as a trailer tail light with stop, turn, and tail functions.
... Waterproof light with 22 diodes provides brake, tail, turn, and backup light functions. Red lens is set inside of clear lens. Mounts on surface of trailer with built-in flange. Accepts industry-standard plugs.Features: Oval LED trailer tail light provide stop, turn, tail, and backup light functions Built-in backup light eliminates the need to cut holes in your trailer for 2 lights Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows improved heat distribution and thinner construction LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens set inside white lens with red and white LEDs Clear lens with white LEDs for backup light Compatible with 12V DC systems Mounts on surface of trailer with built-in black flange - hardware not included Hardwired plugs accept industry-standard 3-prong and 2-prong plugs (sold separately) 3-Prong plug connects stop, turn, and tail functions 2-Prong plug required for backup function DOT compliant Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting Specs: Overall dimensions: 7-1/2" long x 3-1/4" wide x 1" deep Light face dimensions: 6-3/8" long x 2-1/4" wide Diodes: 22 Power draw at 12.8 volts: Stop/turn light: 0.375 amps Tail light: 0.20 amps Backup light: 0.242 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Filters
