This circuitbreaker junction box provides a neat, clean way to mount multiple circuitbreakers to the firewall of your vehicle. Junction box has space for seven separate circuitbreakers.Features: Junction box for studded circuitbreakers Provides neat, clean mounting point for multiple circuitbreakers Has space for 7 studded circuitbreakers Includes bus bar to dissipate heat
In-line 50-amp Type I circuitbreaker cycles automatically and continuously during an over-current condition. Composite alloy material will bend and separate the contacts when an over-current ... (-23 C to 65 C) Storage temperature: -20 F to 200 F (-29 C to 93 C) 1-Year limited warranty Note: 12V circuitbreakers are not recommended for 24V applications since the materials are heat-affected
In-line 30-amp Type I circuitbreaker cycles automatically and continuously during an over-current condition. Composite alloy material will bend and separate the contacts when an over-current ... Features: Metal housing with perpendicular mounting bracket 2-Piece design Mounting bracket attached to circuitbreaker by spot welding Cycling automatic reset Cycles continuously during over-current
In-line 40-amp Type I circuitbreaker cycles automatically and continuously during an over-current condition. Composite alloy material will bend and separate the contacts when an over-current ... (-23 C to 65 C) Storage temperature: -20 F to 200 F (-29 C to 93 C) 1-Year limited warranty Note: 12V circuitbreakers are not recommended for 24V applications since the materials are heat-affected
In-line 30-amp Type I circuitbreaker cycles automatically and continuously during an over-current condition. Composite alloy material will bend and separate the contacts when an over-current ... (-23 C to 65 C) Storage temperature: -20 F to 200 F (-29 C to 93 C) 1-Year limited warranty Note: 12V circuitbreakers are not recommended for 24V applications since the materials are heat-affected
That is correct. If your 2021 Wrangler Unlimited has the connector located under the dash to the left of the steering column near the top of the e-brake pedal as shown in the provided photo, you'd use the #3073-P harness to connect the #90195…
We haven't had the chance to install both the Curt #C13388 and Draw-Tite #75549 trailer hitches on the Mercedes Sprinter to do a comparison, however I did go out to our warehouse to take a measurement on each to determine which will sit higher…
If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
Based on the brochure I was able to find from Ford regarding what is included with the Class III towing package your 2017 Ford Explorer with the 3.5L V6 actually does not have a different transmission cooler than the standard Explorers. Your towing…
Since even semi trucks like what you have use OBDII connectors the Tuson DirecLink Base Model Trailer Brake Controller #335DL-100 that you referenced can be used. The module of this is what interprets the brake signal from your tow vehicle and…
Just to make sure I am understanding correctly, you are getting the correct signals on the black, blue, red, and white wires on the Tuson DirecLink, like the Base Model #335DL-100, but when you connect your trailer to your 2009 Freightliner it…
To install your Reese Pod brake controller in your 2018 Ford Explorer will require the install harness part #3035-P which is a confirmed fit. If you check out the 9:55 mark of the install video I attached to this page you'll see where to find the…
I looked up the water pump you have and it's a 40 psi pump that flows 3.0 gallons per minute. The closest option we have is the HydroMax part #P25201 which can flow up to 3 gallons per minute and is rated for 55 psi.
To convert your 4-way to a 7-way so that you can install a brake controller in your 2013 Toyota FJ Cruiser will require the kit part #ETBC7. For a brake controller I would recommend the Prodigy P3 Brake Controller part #90195. This is our best…
The first breaker, for the 12V Power wire, is a 40amp. This wire runs back to the 7-Way and supplies power to the trailer. If you want a lower rated breaker, you can swap this out for one of the others. The reason we have both a 20amp and 30amp…
In-line 50-amp Type I circuitbreaker cycles automatically and continuously during an over-current condition. Composite alloy material will bend and separate the contacts when an over-current ... Features: Metal housing with perpendicular mounting bracket 2-Piece design Mounting bracket attached to circuitbreaker by spot welding Cycling automatic reset Cycles continuously during over-current
In-line 20-amp Type I circuitbreaker cycles automatically and continuously during an over-current condition. Composite alloy material will bend and separate the contacts when an over-current ... (-23 C to 65 C) Storage temperature: -20 F to 200 F (-29 C to 93 C) 1-Year limited warranty Note: 12V circuitbreakers are not recommended for 24V applications since the materials are heat-affected
In-line 20-amp Type I circuitbreaker cycles automatically and continuously during an over-current condition. Composite alloy material will bend and separate the contacts when an over-current ... Features: Metal housing with perpendicular mounting bracket 2-Piece design Mounting bracket attached to circuitbreaker by spot welding Cycling automatic reset Cycles continuously during over-current
This single-pole, thermal circuitbreaker features a continuous cycle with an automatic reset. Breaker prevents battery from draining and auxiliary application from overdrawing. Typical uses ... 200 degrees F (93 degrees C) 1-Year limited warranty 54-530 Pollak Single-Way, Thermal CircuitBreaker - Cycling/Automatic Reset - 30 Amp Replaces 38630
This single-pole, thermal circuitbreaker features a continuous cycle with an automatic reset. Circuitbreaker prevents battery from draining and auxiliary application from overdrawing. Typical uses ... Features: Metal housing with straight mounting bracket 2-Piece design Attached by spot welding Cycling automatic reset Cycles continuously during over-current condition Returns to run mode when
This surface-mounted 100-amp Type III circuitbreaker remains open on overload and has a unique reset mechanism which provides visible indication of tripped condition. Typically used in auxiliary and ... current-affected. 54-871PLP Pollak CircuitBreaker - 100 Amperes - Surface Mount - Manual Reset - Plastic Housing - Type 3
This single-pole, thermal circuitbreaker features a continuous cycle with an automatic reset. Breaker prevents battery from draining and auxiliary application from overdrawing. Typically used on ... 200 degrees F (93 degrees C) 1-Year limited warranty 54-540 Pollak Single-Way, Thermal CircuitBreaker - Cycling/Automatic Reset - Straight Mounting Bracket - 40 Amp Alternate to 9510
This surface-mounted 60-amp Type III circuitbreaker remains open on overload and has a unique reset mechanism which provides visible indication of tripped condition. Typically used in auxiliary and ... current-affected. 54-870PLP Pollak CircuitBreaker - 60 Amperes - Surface Mount - Manual Reset - Plastic Housing - Type 3
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Filter Results
