This heavy-duty tow bar is easy to maneuver, with a swivel head joint that lets the arms twist left and right. Non-binding levers let you disconnect at the campsite, even on rough terrain. Extra-long arms help you make tight turns.
Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The unit plugs into your 7-way for a one-step installation with no wiring.True Course (C94VV - sold separately) prevents sway Tire Linc (C54VV - sold separately) monitors tire pressure and temperatue Quick Tip: The Bluetooth PIN for initially pairing to your smart device is located in the quick reference guide! Note: If Bluetooth connection is lost, the brake controller will continue to function safely, using the most recently programmed settings.
TPMS individually monitors the tire pressure and temperature of your RV's tires. The monitor can store data for up to 4 vehicles. The repeater boosts signal between sensors and monitor for longer RVs and trailers.Before you begin setup, make sure the monitor has been charged and the repeater and sensor batteries have been installed. Select your RV or trailer configuration or the locations of the tires you want to monitor. Then select one tire location, install a sensor on the corresponding tire on your RV or trailer, and the current PSI will automatically appear on the screen.
This compact power center replaces your WFCO 35-amp distribution panel with an all-in-one converter charger and AC/DC distribution, plus multi-stage charging and automatic lithium detection for a straightforward, reliable upgrade.This WF-8735-AD is designed to replace many factory-installed WFCO 35-amp power centers, which is why it fits so well in common RV power center locations. It can also be used as a replacement for other brands with similar layouts and capacity. Because every RV is a little different, it's still important to verify cutout dimensions and wiring before installing.
This aluminum tow bar is the absolutely snazziest tow bar you can get. Sleek, lightweight, with built-in LEDs for increased visibility and safe driving at night. The electrical cord comes installed in the cable guide, keeping your setup organized.It's also a great way to keep all your gear together. You won't need to find a separate place to store your power cord; you can keep it right there where you need it, ready for the next time you flat tow. You can thread the safety cables through the guides as well, which will likewise protect them from damage and make them easy to store.
TPMS individually monitors the tire pressure and temperature of your RV's tires. The monitor can store data for up to 4 vehicles. The repeater boosts signal between sensors and monitor for longer RVs and trailers.Before you begin setup, make sure the monitor has been charged and the repeater and sensor batteries have been installed. Select your RV or trailer configuration or the locations of the tires you want to monitor. Then select one tire location, install a sensor on the corresponding tire on your RV or trailer, and the current PSI will automatically appear on the screen.
This compact power center replaces your WFCO 25-amp distribution panel with an all-in-one converter charger and AC/DC distribution, plus multi-stage charging and automatic lithium detection for a straightforward, reliable upgrade.This WF-8725-AD is designed to replace many factory-installed WFCO 25-amp power centers, which is why it fits so well in common RV power center locations. It can also be used as a replacement for other brands with similar layouts and capacity. Because every RV is a little different, it's still important to verify cutout dimensions and wiring before installing.
This compact power center replaces your WFCO 40-amp distribution panel with an all-in-one converter charger and AC/DC distribution, plus multi-stage charging and automatic lithium detection for a straightforward, reliable upgrade.This WF-8740-AD is designed to replace many factory-installed WFCO 40-amp power centers, which is why it fits so well in common RV power center locations. It can also be used as a replacement for other brands with similar layouts and capacity. Because every RV is a little different, it's still important to verify cutout dimensions and wiring before installing.
94" Long. This set of E tracks lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and much more.You can mount it in your garage, workshop, basement, storage shed, barn, stable, or other stationary location. It's great for storing tools, cans, cables and other items you have laying around. You can install the track on the wall or on the floor, exactly where you need it.
TPMS individually monitors the tire pressure and temperature of your RV's tires. The monitor can store data for up to 4 vehicles. The flow through design lets you inflate tires without removing sensors from valve stems.Before you begin setup, make sure the monitor has been charged and the repeater and sensor batteries have been installed. Select your RV or trailer configuration or the locations of the tires you want to monitor. Then select one tire location, install a sensor on the corresponding tire on your RV or trailer, and the current PSI will automatically appear on the screen.
TPMS monitors your RV's tire pressure and temperature and uses Bluetooth to wirelessly send updates. The system lets you use the monitor or an app on your smartphone as the screen. Included repeater boosts signal between the sensors and screen.If you have decided to use your smart device as the monitor, download the app and connect to Bluetooth. Select your RV or trailer configuration or the locations of the tires you want to monitor. Then select one tire location, install a sensor on the corresponding tire on your RV or trailer, and the current PSI will automatically appear on the screen.
TPMS individually monitors the tire pressure and temperature of your RV's tires. The monitor can store data for up to 4 vehicles. The flow through design lets you inflate tires without removing sensors from valve stems.Before you begin setup, make sure the monitor has been charged and the repeater and sensor batteries have been installed. Select your RV or trailer configuration or the locations of the tires you want to monitor. Then select one tire location, install a sensor on the corresponding tire on your RV or trailer, and the current PSI will automatically appear on the screen.
TPMS individually monitors the tire pressure and temperature of your RV's tires. The monitor can store data for up to 4 vehicles. The repeater boosts signal between sensors and monitor for longer RVs and trailers.Before you begin setup, make sure the monitor has been charged and the repeater and sensor batteries have been installed. Select your RV or trailer configuration or the locations of the tires you want to monitor. Then select one tire location, install a sensor on the corresponding tire on your RV or trailer, and the current PSI will automatically appear on the screen.
Get safe, smooth braking for your towed car with this truly proportional braking system. Car slows perfectly in sync with your RV. Installs permanently so you can just plug in and go. Low-profile design keeps it out of sight and out of the way.Quick Tip: The coach air connection assembly needs to be mounted in a location where the air lines will not be exposed to direct heat sources or moving parts; in front of the rear axle is often a good location.
Get safe, smooth braking for your towed car with this truly proportional braking system. Installs permanently so you can just plug and go. Low-profile design keeps it out of sight and out of the way. Includes convenient wireless braking monitor.Quick Tip: The coach air connection assembly needs to be mounted in a location where the air lines will not be exposed to direct heat sources or moving parts; in front of the rear axle is often a good location.
Imagine prepping for your trip and having your braking system ready in less than a minute. With the RVibrake 4, the audio assistant guides you step by step, so there's no fumbling or guesswork, just a quick and reliable setup every time.Works With Any Vehicle: Fits any flat towable vehicle. Easy To Handle And Store: Slim, lightweight design makes it simple to swap between vehicles or put away when not in use. Real-Time Braking Updates: Bullseye monitor keeps you informed right from your seat.
You're checking battery levels in an RV but don't want another display. This IP65-rated monitor uses a 99.6% accurate shunt and the VictronConnect app to show state of charge and usage, so you get precise data without adding a screen.When the system grows beyond a standalone monitor, the SmartShunt can pass battery data into connected Victron hardware instead of staying isolated. Handles Harsh Install Locations While Covering Different Battery Setups Battery monitoring gear often ends up mounted where moisture, dirt, and temperature swings are part of the deal, and that can narrow where you can safely place it.
Heavy-duty winch with 5.2-hp, series-wound motor lets you quickly and safely recover a stuck vehicle. Includes 100' synthetic rope, hawse fairlead, free-spooling clutch, and hand-held remote with 12' lead. Power unit can be remotely mounted.This prevents potentially damaging heat buildup near the motor. And since the brake is located inside the drum, the winch has a smaller profile and will fit into locations where space is limited such as between a vehicle's bumper and radiator.
TPMS monitors your RV's tire pressure and temperature and uses Bluetooth to wirelessly send updates to your smartphone. Waterproof sensors have 3 pairing methods to make it easy to set up. App lets you set tire pressure and temperature settings.Once the app has been successfully downloaded, select your vehicle, RV, or trailer configuration and the locations of the tires you want to monitor. The tire locations can be changed at any point, even after the sensors have been installed and paired.
Simple yet tough, this tow bar is engineered to be easy to hook up. The extra-long arms help you make tight turns. Stores conveniently on the back of your RV: push the arms up and the holding latch will automatically lock into place.The arms can then fold to the right or to the left, whichever side you want to store it on. For added protection from the elements, slip the Roadmaster tow bar cover (RM-055-3 - sold separately) over the Falcon 2 when you're not using it.
Automatically level and stabilize your travel trailer with this electronic leveling system. 5 Precise, motorized jacks can be operated by the included control panel or via your smart device (if RV has Wi-Fi and factory-installed OneControl system).The Ground Control TT can also correctly position your trailer for hookup with the hitch recognition feature. This time-saving function stores your trailer's position when you unhook from your tow vehicle so that it can automatically return your trailer to that position when you're ready to hitch back up again.
TPMS monitors your RV's tire pressure and temperature and uses Bluetooth to wirelessly send updates. You can use the monitor or a smartphone app as the screen. Flow through design lets you inflate tires without removing sensors from valve stems.If you have decided to use your smart device as the monitor, download the app and connect to Bluetooth. Select your RV or trailer configuration or the locations of the tires you want to monitor. Then select one tire location, install a sensor on the corresponding tire on your RV or trailer, and the current PSI will automatically appear on the screen.
94" Long. This set of E tracks lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and much more.You can mount it in your garage, workshop, basement, storage shed, barn, stable, or other stationary location. It's great for storing tools, cans, cables and other items you have laying around. You can install the track on the wall or on the floor, exactly where you need it.
Think of it as a one-time project that pays off on every trip. Once the Shadow 2 braking system is installed under the hood, you hook up, check your monitor, and drive away with the peace of mind that your towed vehicle is stopping safely behind you.Once that step is done, the rest of the install is straightforward and organized. If you're not a DIY-er, check out our Installer Locator to find an installer near you. What You Need to Flat Tow Flat towing can be a much more convenient way to take your car RVing with you than using a trailer or a tow dolly.
Filters
