TPMS monitors your RV's tire pressure and temperature and uses Bluetooth to wirelessly send updates. The system lets you use the monitor or an app on your smartphone as the screen. Included repeater boosts signal between the sensors and screen.
Features:
Specs:
While on the road, it is very important to regularly maintain your tires and make sure they're inflated correctly. If your tires are underinflated or overinflated, they'll develop irregular tread wear and become prone to overheating and blowing out. The TireMinder A1AS TPMS helps protect your investment and keep your family safe by monitoring your tires and alerting you of any signs of danger before disaster strikes.
This TPMS includes 6 sensors that let you individually monitor each tire on your application for changes in pressure and temperature. These brass sensors are able to work on rubber, steel, chrome, or nickel valve stems. Every 6 seconds, they will check the pressure and temperature again, and use Bluetooth to send that information directly to the monitor or smartphone app. These durable sensors are waterproof, which means that they can be used on boat trailers and other marine applications.
Unlike most other systems, this TPMS lets you choose between using the monitor or an app on your smart device as the screen. The TireMinder TPMS 2.0 app is free to download and use. For Apple smartphones and devices, it's compatible with models iPhone 7 and iPad 7 and newer. You can also use Apple CarPlay or Android Auto to display the details of your tire on your car's dashboard. For Android smartphones, it's compatible with model Android 4.4 and newer. However, if you decided to use the app, you will still have to have the monitor in operation within 10 feet, as it is crucial for helping to bridge the Bluetooth transmission between the sensors and your phone.
The monitor or smartphone app will provide you with visual and audible cues to warn you of dangerous changes in tire pressure and tire temperature, as well as alert you of changes with the monitor battery, sensor battery, and sensor signal. Before you begin setup, make sure the monitor has been charged and the repeater and sensor batteries have been installed. If you have decided to use your smart device as the monitor, download the app and connect to Bluetooth.
Select your RV or trailer configuration or the locations of the tires you want to monitor. Then select one tire location, install a sensor on the corresponding tire on your RV or trailer, and the current PSI will automatically appear on the screen. With the purchase of additional sensors (sold separately), you can monitor up to 22 tires, which is perfect for a fleet. Sensors can be added, moved, deleted, or replaced at any point, even after initial installation.
You can set the tire pressure in psi, Bar, and KPa. If you choose psi, you can set the tire pressure anywhere from 0 psi to 199 psi. As for the temperature, you're able to switch between degrees F and degrees C, and the system will alert you if the temperature exceeds 167 degrees F. With both the monitor and the app, you are also able to disconnect and reconnect to different vehicles, RVs, or trailers. This is useful for those who switch between different applications, such as a Class A motorhome owner who sometimes tows a car.
This repeater helps improve signal strength and range of the sensors. It has dual Hi-Db antennas that let the booster cut through signal interference coming from wireless electronic devices used in surrounding automobiles. It also ensures that the link from the sensors to the monitor is strong and continuous. The unit has a green light on the front panel to indicate it has power and a blue light that blinks when it transmits a signal.
This TPMS system includes 12 batteries, 6 locking nuts, 6 O-rings, a wrench, and an adhesive. Once the batteries have been inserted and covers have been re-installed, remove the cap of your valve stems, thread the locking nuts onto the valve stems, and install the sensors. Lastly, secure the locknuts against the sensors with the wrench.
The weatherproof and dustproof Bluetooth repeater can be installed anywhere on the exterior of your RV or trailer between the rear axle and king pin. The optimal mounting location for a towable camper is toward the front whereas the optimal mounting location for a drivable RV is toward the rear. it is not recommended to install the repeater inside your vehicle, as you might experience signal blockage. Use either the adhesive (included) or hardware (not included) to attach the repeater and wire it to a power supply line. In order to reduce vibration, make sure it's securely mounted. Then connect the black wire to ground, and the red wire to power. Zip-ties are included to fasten the booster and wires to your RV or trailer.
California residents: click here
Do you have a question about this TPMS Sensor?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.