Upgrade the strength and durability of your stabilizerjack feet by adding these permanent SnapJack feet to the bottom. Increased surface area creates a more robust footprint compared to a standard foot. ... Features: SnapJack foot improves the stability of your stabilizerjack (sold separately) Thicker and stronger than standard feet Improved stability and grip on uneven terrain Anti-slip base pads are made from a durable recycled rubber Withstands heavy-duty use for years to come Prevents slippage when stabilizing your camper Provides significantly more grip compared to using wooden blocks Added height on the SnapJack feet prevents the stabilizers from being over-extended Includes all hardware to install SnapJack feet to stabilizers Made in the USA Specs: Applications: Lippert PSX1 Lippert PSX2 Lippert Quick Drop Stabilizer Rock Solid Stabilizer Systems Quantity: 4 feet Overall dimensions: 8" wide x 8" long x 2-3/4" tall Foot dimensions: 5-1/2" diameter x 1/4" tall Weight: 5.4 lbs each 2-Year limited warranty
... Includes SnapJack feet for improved stability and grip on uneven terrain.Features: Scissor jacks help level and stabilize your 5th-wheel, travel, horse, or cargo trailer Large metal feet come with pre-installed SnapPads Thicker and stronger than standard bow-tie feet Improved stability and grip on uneven terrain Added height on the SnapJack feet prevents the stabilizers from being over-extended 8-Hole top plates allow for greater adjustability during installation Includes manual crank handle and hardware to install SnapJack feet to stabilizers Added height on the SnapJack feet prevents the stabilizers from being over-extended Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" diameter Support capacity: 5,000 lbs 2,500 lbs per jack Quantity: 2 jacks SnapJack Quantity: 2 Dimensions: 8-1/8" wide x 2-3/4" tall Weight: 3.8 lbs each Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Base pads replace the bricks and blocks normally needed when positioning your trailer jack. 8" Tall pads work as a jack stand to support your trailer's scissor or stabilizerjacks. ... Features: Base pads work as a jack stand to provide a platform that supports the weight of your scissor or stabilizerjacks Minimize amount of cranking needed to position jack Eliminate the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jackpads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pads easy to carry and retrieve from under your RV Recessed pockets let you easily stack the pads to compensate for uneven terrain Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 5 pads Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when stacked: 14" 2-Year limited warranty
Base pads replace the bricks and blocks normally needed when positioning your trailer jack. 8" Tall pads work as a jack stand to support your trailer's scissor or stabilizerjacks. ... Features: Base pads work as a jack stand to provide a platform that supports the weight of your scissor or stabilizerjacks Minimize amount of cranking needed to position jack Eliminate the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jackpads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pads easy to carry and retrieve from under your RV Recessed pockets let you easily stack the pads to compensate for uneven terrain Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 4 pads Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when stacked: 14" 2-Year limited warranty
Base pad replaces the bricks and blocks normally needed when positioning your trailer jack. 8" Tall pad works as a jack stand to support your trailer's tongue or stabilizerjack.Features: Base pad works as a jack stand to provide a platform that supports the weight of your tongue or stabilizerjack Minimizes amount of cranking needed to position jack Eliminates the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jackpads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pad easy to carry and retrieve from under your RV Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 1 pad Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when 2 are stacked: 14" 2-Year limited warranty
Base pads replace the bricks and blocks normally needed when positioning your trailer jack. 8" Tall pads work as a jack stand to support your trailer's scissor or stabilizerjacks. ... Features: Base pads work as a jack stand to provide a platform that supports the weight of your scissor or stabilizerjacks Minimize amount of cranking needed to position jack Eliminate the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jackpads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pads easy to carry and retrieve from under your RV Recessed pockets let you easily stack the pads to compensate for uneven terrain Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 2 pads Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when stacked: 14" 2-Year limited warranty
Upgrade the strength and durability of your stabilizerjack feet by adding these permanent SnapJack feet to the bottom. Increased surface area creates a more robust footprint compared to a standard foot. ... Features: SnapJack foot improves the stability of your stabilizerjack (sold separately) Thicker and stronger than standard feet Improved stability and grip on uneven terrain Anti-slip base pads are made from a durable recycled rubber Withstands heavy-duty use for years to come Prevents slippage when stabilizing your camper Provides significantly more grip compared to using wooden blocks Added height on the SnapJack feet prevents the stabilizers from being over-extended Includes all hardware to install SnapJack feet to stabilizers Made in the USA Specs: Applications: Lippert PSX1 Lippert PSX2 Lippert Quick Drop Stabilizer Rock Solid Stabilizer Systems Quantity: 2 feet Overall dimensions: 8" wide x 8" long x 2-3/4" tall Foot dimensions: 5-1/2" diameter x 1/4" tall Weight: 5.4 lbs each 2-Year limited warranty
Adapter kit lets you attach your JT's Strong Arm stabilizers to electric landing gear jacks. Bolts onto the round footpads of your landing gear. Includes 4 footpad plates.Features: Adapter kit lets you attach the feet of your electric landing gear jacks to your Lippert Components JT's Strong Arm stabilizers Plates mount on either side of jack to allow for installation of swing bolts Bolt-on installation Includes 4 jackpad adapter plates 1-Year warranty
Upgrade the strength and durability of your scissor jack feet by adding this SnapJack foot. Increased surface area creates a more robust footprint compared to a standard bow-tie foot. Ideal for sloped or uneven surfaces.Features: SnapJack foot improves the stability of your scissor jack (sold separately) Thicker and stronger than standard bow-tie feet Improved stability and grip on uneven terrain Anti-slip base pads are made from a durable recycled rubber Withstands heavy-duty use for years to come Prevents slippage when stabilizing your camper Provides significantly more grip compared to using wooden blocks Added height on the SnapJack feet prevents the stabilizers from being over-extended Includes hardware to install SnapJack feet to stabilizers: (8) Black steel bushings (4) 8.8 M10 x1.5 70 mm Partially threaded black hex head steel bolts (4) 8.8 M10 x1.5 Black nylon-insert steel locknuts (4) 8.8 M8 x1.25 70 mm Partially threaded black hex head steel bolts (4) 8.8 M8 x1.25 Black nylon-insert steel locknuts Specs: Application: Works with most scissor jacks (Excluding BAL LoPro & Weize 7500) Quantity: 2 feet Overall dimensions: 8-1/8" diameter x 2-3/4" tall Foot dimensions: 5-1/2" diameter x 1/4" tall Weight: 5.4 lbs each Note: Will not work with BAL LoPro & Weize 7500 scissor jacks.
Get more traction and stability for your camper's scissor jack by snapping these durable, molded rubber pads onto the base. Fits almost any scissor jack with a bowtie base and installs permanently so you never have to find a spot to store it.Features: Snaps onto the base of your scissor jack for added traction and stability Increases surface area to help prevent sinking into soft ground Grips uneven terrain and prevents metal from rusting or bending Serves as a cushion so metal foot won't crack or chip your driveway Protects footpad from rocks and roots Won't crack, break, or crumble Molded EPDM rubber is more durable than crumb rubber Has built-in drain holes to release moisture, helping to prevent corrosion Installs permanently - no need to remove and store Just pop the shoe on, use a screwdriver to stretch the rubber over the base, and secure with included ties Made in the USA Specs: Application: 2,500-lb to 9,000-lb scissor jacks with bowtie bases Base dimensions: 8-3/4" long x 4-3/8" wide Adapters included to fit 8" long bases External pad dimensions: 11" long x 6-1/2" wide Quantity: 2 pads 2-Year limited warranty
... The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jackpads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
... The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jackpads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
... The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jackpads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
... The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jackpads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
Plastic jackpads in a 4-pack, designed to support stabilizerjacks and help prevent sinking on soft surfaces, with a 6.1" x 6.1" footprint for weight distribution.Features: Designed to support stabilizerjacks and distribute weight on soft ground Plastic construction Compact design for placement, storage, and transport Helps reduce sinking on uneven or soft surfaces Includes four jackpads Specs: Quantity: 4-pack Weight capacity: 5,000 lbs total Construction: Plastic
Large plastic jackpads in a 4-pack, designed to support stabilizerjacks and distribute weight over a larger surface area to help reduce sinking on soft ground.Features: Designed to support stabilizerjacks and distribute weight on soft surfaces Larger footprint compared to standard jackpads for increased coverage Plastic construction Helps reduce sinking on uneven or soft ground Includes four jackpads Specs: Quantity: 4-pack Dimensions (each): 14" long x 12" wide x 7/8" tall Weight capacity: 6,000 lbs total Construction: Plastic
This leveling system contains everything you need to stabilize your trailer or RV at home or the campsite. High-impact polyurethane resists damage and is treaded for maximum grip. Ramps, chocks, and jackpads nest together for compact storage.Features: Comprehensive kit easily levels your trailer or RV Includes 2 levelers, 2 wheel chocks, and 4 jackpads Compact levelers help your trailer stay flat on any surface Adjust to any height up to 4-1/2" Works with tires sizes up to 32" wide Ribbed bottom keeps ramps firmly in place on the ground Treaded surface grips your tire for added stability Heavy-duty wheel chocks keep your trailer from rolling when it's parked and leveled Drainage holes prevent water buildup from reducing traction Jackpads serve as stabilizing cushions so the leveling system won't sink into the ground Connectable design allows the system to nest together for compact storage High-impact polyurethane holds up under tremendous weight Resists scuffs and abrasions Specs: Quantity: 2 leveling ramps, 2 wheel chocks, and 4 jackpads Ramp dimensions: 16-9/16" long x 14-9/16" wide x 4-1/2" tall System weight: 9.9 lbs 1-Year warranty
If you've ever guessed at your trailer's tongue weight and hoped for the best, you're not alone. This compact scale gives you a quick, one-handed way to check weight at the coupler. It even comes with a SnapPad for added grip.Specs Compatibility Fits 1-7/8", 2", and 2-5/16" ball couplers Includes 6" SnapPad (SN47FR) Capacity Maximum weight: 2,000 lbs Adjustability Max height: 20-3/4" Min height: 14-3/4" Adjusts in 2" increments Dimensions Footplate diameter: 6" Jackpad diameter: 7-3/4" Warranty Limited lifetime
What folds flat like a pancake for easy storage, unfolds in seconds, and comes with a carry bag for easy transport? The Flap Jack! These durable jack blocks provides a stable base for your trailer, RV, or camper, making setup quick and hassle-free.Simply separate the 3 pieces, align them, and let the built-in neodymium magnets snap everything into place. It's a quick, tool-free solution that gets you stabilized in seconds. Strong & Stable With a 6,000-lb weight capacity per block, each jack block is built to handle heavy loads without flexing.
Designed for travel trailers with BAL leveling systems, these sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area provides added stability on soft ground. ... Features: Heavy-duty rubber pads snap onto your travel trailer's BAL leveling to make leveling faster and easier Eliminates the need to crawl under your trailer to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your trailer Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jack feet from corroding Simple, one-time installation Line up the pads beneath the jack feet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jackpads or blocks around with you Made in USA Specs: Application: travel trailers with (4) 5-1/2" square jack feet Diameter: 8-1/8" Weight: 3 lbs per pad 2-Year limited warranty Simple, One-Time Installation SnapPads install quickly and easily, and never need to be removed.
Minimize chassis movement in your camper with this stabilizer kit. Corner steadies have locking swivel brackets and large grip handles for easy swiveling. Large, flat, load-bearing feet are ideal for soft ground. ... Features: Stabilizer kit comes with necessary equipment to minimize chassis movement in your camper Corner steadies help keep chassis secure Locking swivel bracket and large grip handle for comfortable and easy swiveling Large load-bearing feet are ideal for soft ground Foot locks away and is surrounded by silencer pads to reduce noise caused by vibration Winding handle makes dispatching the steadies simple Weld-on installation Corrosion- and rust-resistant black powder coat finish has 600-hour salt spray rating Universal design fits either side of your trailer Stabilizers aren't designated as left-hand (driver's-side) or right-hand (passenger's-side) Specs: Length: 30" 12 Month warranty
Minimize chassis movement in your travel trailer with this jackstabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear.Features: Helps to stabilize your travel trailer and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on travel trailers Bolts onto C-channel, I-beam, or H-beam trailer frames - no welding required Attaches to traditional stabilizerjacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 6 Stiffening pads 4 Spacer mounts 6 T-bolts 30 Nuts 48 Washers 18 Hex cap screws 12 Swing bolts 8 Hex washer heads 1-Year warranty
Minimize chassis movement in your camper with this stabilizer kit. Corner steadies have locking swivel brackets and large grip handles for easy swiveling. Large, flat, load-bearing feet are ideal for soft ground. ... Features: Stabilizer kit comes with necessary equipment to minimize chassis movement in your camper Corner steadies help keep chassis secure Locking swivel bracket and large grip handle for comfortable and easy swiveling Large load-bearing feet are ideal for soft ground Foot locks away and is surrounded by silencer pads to reduce noise caused by vibration Winding handle makes dispatching the steadies simple Weld-on installation Corrosion- and rust-resistant black powder coat finish has 600-hour salt spray rating Specs: Length: 24" 12 Month warranty
Minimize chassis movement in your camper with this stabilizer kit. Corner steadies have locking swivel brackets and large grip handles for easy swiveling. Large, flat, load-bearing feet are ideal for soft ground. ... Features: Stabilizer kit comes with necessary equipment to minimize chassis movement in your camper or trailer Corner steadies help keep chassis secure Locking swivel bracket and large grip handle for comfortable and easy swiveling Large load-bearing feet are ideal for soft ground Foot locks away and is surrounded by silencer pads to reduce noise caused by vibration Winding handle makes dispatching the steadies simple Weld-on installation Zinc finish provides corrosion resistance Specs: Length: 30" Weight capacity: 1,929 lbs when installed in 90-degree positions 12 Month warranty
Filters
