Replaces 1 taillightsocket for Blue Ox taillight wiring kit (BX8869). Socket mounts inside your car's lenses. Bulb included.Features: Replacestaillightsocket for Blue Ox taillight wiring kit (BX8869) Mounts inside the taillights 3-Wire design Includes 1 replacementsocket and bulb
This kit includes 10 bulbs and 10 sockets designed to work with Roadmaster's taillight wiring kits.Features: Works with Roadmaster taillight wiring kits Includes 10 bulbs and 10 sockets
These bright little lights get turn and brake signals on your towed car without splicing into its wiring. They install right into the taillight housing, with the wiring out of sight. ... Features: Displays your RV's tail, turn, and brake signals on your towed car without tapping into its wiring No risk of damage from electrical feedback No effect on your warranty Fits easily in taillight housing - requires only a 9/16" hole Requires drilling Shines brighter and more efficiently than incandescent bulbs Includes wiring, 2 red LEDs, 2 sockets, and installation hardware Requires additional harness with 4-flat plug to connect to motorhome - sold separately Made in the USA Specs: Wiring harness length: 26' Brown and green wire length: 8' 16 Gauge Light output per bulb: 144 Lumens 1-Year warranty Note: Check that there will be enough room in each taillight housing for the extra bulb and socket.
5-5/16" x 3-7/16". Waterproof, incandescent taillight serves as a stop, tail, and turn signal. Shock-proof socket protects bulb against damage. Recessed mount with grommet (not included). ... Features: Rectangular incandescent trailer light serves 3 functions Stop, turn, and tail Sonically sealed, waterproof housing and lens unit is submersible Incandescent bulb can be easily replaced Shock-proof socket protects bulb against damage Durable polycarbonate snap-on lens and housing Compatible with 12V DC systems Recessed mount with grommet (A33GB - sold separately) Accepts industry standard 3-prong plug (A45PB or A47PB - sold separately) Specs: 5-5/16" long x 3-7/16" tall x 1-15/16" thick Bulb type: incandescent Power draw at 12.8V: Stop/turn: 2.19 amps Tail: 0.49 amps 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Uni Bond # SE4060R Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
... They mount inside your vehicle's taillight housing, with the wiring out of sight.Features: Displays your RV's tail, turn, and brake signals on your towed car without tapping into its wiring No risk of damage from electrical feedback No effect on your warranty Mounts inside car's taillight housing Requires a 1" diameter hole drilled into the taillight housing Includes 2 wiring harnesses, 2 incandescent lights, 2 sockets, and installation hardware Made in the USA Specs: Overall measurement of bulb: 2-1/4" Length of bulb from flange to top of bulb: 2" Length past mounting surface: 1-7/8" 4-Way flat harness: 30' long RV harness: 6' long Hole required for sockets: 1" diameter Limited lifetime warranty Note: Check that there will be enough room in each taillight housing for the extra bulb and socket.
... They mount inside your vehicle's taillight housing, with the wiring out of sight.Features: Displays your RV's tail, turn, and brake signals on your towed car without tapping into its wiring No risk of damage from electrical feedback No effect on your warranty Mounts inside car's taillight housing Requires drilling Includes wiring, 2 incandescent lights, 2 sockets, and installation hardware Requires additional harness with 4-flat plug to connect to motorhome - sold separately Made in the USA 1-Year warranty Note: Check that there will be enough room in each taillight housing for the extra bulb and socket.
These lights get turn and brake signals on your towed car without splicing into its wiring. They mount inside your vehicle's taillight housing, with the wiring out of sight. ... Features: Displays your RV's tail, turn, and brake signals on your towed car without tapping into its wiring No risk of damage from electrical feedback No effect on your warranty Mounts inside car's taillight housing Requires a 1" diameter hole drilled into the taillight housing Shines brighter and more efficiently than incandescent bulbs Includes wiring, 2 red bulbs, 2 sockets, and installation hardware Requires additional harness with 4-flat plug to connect to motorhome sold separately Made in the USA Specs: Wiring harness length: 27' Light output per bulb: 450 lumens Overall length of bulb: 2-1/2" Length of bulb from flange to top of bulb: 2" Hole required for sockets: 1" diameter Wire loom: Length: 3' Diameter: 1/2" Limited lifetime warranty Note: Check that there will be enough room in each taillight housing for the extra bulb and socket.
These bright little lights get turn and brake signals on your towed car without splicing into its wiring. They fit nicely inside your vehicle's taillight housing, with the wiring out of sight. ... Features: Displays your RV's tail, turn, and brake signals on your towed car without tapping into its wiring No risk of damage from electrical feedback No effect on your warranty Fits easily in taillight housing - requires only a 9/16" hole Requires drilling Shines brighter and more efficiently than incandescent bulbs Includes wiring, 2 white LEDs, 2 sockets, and installation hardware Requires additional harness with 4-flat plug to connect to motorhome - sold separately Made in the USA Specs: Wiring harness length: 26' Brown and green wire length: 8' 16 Gauge 1-Year warranty Note: Check that there will be enough room in each taillight housing for the extra bulb and socket.
This complete kit includes everything you need to display brake and turn signals on your towed car. Bright LEDs mount inside your vehicle's taillight housings, with the wiring out of sight. Includes 7-to-6-wire adapter cable and 6-wire socket.Features: LEDs display your RV's tail, turn, and brake signals on your towed car without tapping into its wiring Avoids risk of damage from electrical feedback Has no effect on your warranty Mounts inside car's taillight housing - requires drilling a 1" hole Shines brighter and more efficiently than incandescent bulbs 7-Way to 6-way adapter cord runs power from the motorhome to the towed car Coiled to prevent dragging and tangling Resistant to the elements with vinyl coating 6-Way socket hardwires to towed car and mounts on front bumper Kit includes: 2 Red bulbs with sockets 4-Wire harness 7-Way to 6-way adapter cable 6-Way socket Butt connectors, zip-ties, wire loom, and installation hardware Made in the USA Specs: Adapter cord length: 8' when extended 16 Gauge Wiring harness length: 27' Light output per bulb: 450 lumens Overall length of bulb: 2-1/2" Length of bulb from flange to top of bulb: 2" Wire loom: Length: 3' Diameter: 1/2" 1-Year limited warranty Note: Check that there will be enough room in each taillight housing for the extra bulb and socket.
5-5/16" x 4-9/16" Square. Incandescent trailer taillight serves 6 functions on trailers under 80" wide: brake, tail, turn, side marker, side reflector, and rear reflector. Shock proof sockets. ... Features: Trailer taillight serves 6 functions on trailers less than 80" wide Stop, Turn, Tail, Rear Reflex, Side Marker, and Side Reflex Built-in reflex reflectors remove the need for a separate reflector Shock-proof socket protects the bulb Incandescent bulb can be easily replaced Red lens over 2 bulbs Durable polycarbonate housing and acrylic lens Stud mounts on trailer with included studs Quick connect wiring - simply insert stripped wire into holes for a secure connection Light grounds through mounting studs Specs: Configuration: passenger side Driver side: ST9RB (sold separately) Dimensions: 5-5/16" long x 4-9/16" wide x 2-7/8" deep Distance between mounting studs (center on center): 2" Power draw at 12.8V: Stop/turn: 2.5 amps Tail: 1 amp 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Uni Bond # TL4400 Wesbar # 3060 Graote # 52302 Peterson # 440
Replaces the LED bulb from your Roadmaster taillight wiring kit for towed vehicles (RM-152-LED).Features: Replacement LED bulb fits Roadmaster taillight wiring kit (RM-152-LED) Light output: 450 lumens Red color Overall length of bulb: 2-1/2" Length of bulb from flange to top of bulb: 2" Quantity: 1 bulb (socket not included)
5-1/2" Round. Incandescent trailer light functions as a stop, tail, and turn signal. Vibar socket absorbs road shock and vibration. Durable stainless-steel housing. Flush mount with built-in flange. 2-Wire design with power leads. (1) 1157 Bulb.Features: Combination trailer taillight serves 3 functions when properly mounted Stop lightTaillight Turn signal light Vibar socket absorbs road shock and vibration to prolong bulb life Incandescent bulb can be easily replaced Durable stainless-steel housing with retaining ring protects light Red lens over incandescent bulb Compatible with 12V DC systems Flush mount with built-in mounting flange Requires 4-1/2" diameter hole for installation 2-Wire design includes power leads - grounds through mounting stud DOT compliant Made in the USA Specs: Dimensions: 5-1/2" diameter x 1-5/8" thick Light face dimensions: 4" diameter Distance between mounting holes (center on center): 4-1/4" Bulb type: 1157 Power draw at 12.8V: 2.2 amps 1-Year limited warranty Manufacturer Cross Reference Light will work as an exact replacement for: Grote # 50232 Truck Lite # 40058R Optronics # ST40RB Recessed-Mount Light Recessed-mount trailer lights install with a grommet, which is often sold separately.
5-7/8" x 6-3/4". Incandescent Jeep-style trailer light acts as brake, tail, turn, backup, and license plate light. Shockproof socket for long bulb life. Plastic housing and acrylic lens. ... Features: Jeep-style trailer taillight serves 5 functions Stop light, taillight, turn signal light, and backup light Built-in license plate light illuminates trailer license plate Shockproof socket guarantees long bulb life Screw-on, red and clear acrylic lens can be easily replaced Incandescent bulbs can also be replaced Durable corrosion proof plastic housing Mounts on surface of trailer with included studs Light grounds through mounting hardware 3-Wire molded harness Black wire for backup Green wire for stop/turn signal Red wire for taillight Specs: Dimensions: 5-7/8" length x 6-3/4" width x 2-13/16" depth Distance between mounting studs (center on center): 2" Power draw at 12.8V: Stop/turn: 2.3 amps Taillight: 0.9 amps Bulb type: 2057 3-Year warranty Light is a direct replacement for: Peterson 442L
5-3/8" Diameter round. Incandescent trailer light provides stop, turn, and tail signal. Shock-proof socket protects bulb against damage. Durable steel housing. Flush mount to trailer - hardware not included. 2-Wire design. (1) 2057 bulb.Features: Round incandescent trailer light serves 3 functions Stop, turn, and tail Shock-proof socket protects bulb against damage Incandescent 2057 bulb can be easily replaced Durable steel housing Red acrylic lens over bulb Compatible with 12V DC systems Flush mount to trailer with flange - hardware not included Requires cutout 2-Wire design includes power lead and ground wire Specs: Dimensions: 5-3/8" diameter x 1-9/16" thick Bulb type: 2057 Power draw at 12.8V: Stop/turn: 2.4 amps Tail: 0.49 amps 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Uni Bond # TL4300R Truck Lite # 80334R Grote # 50232 Peterson # 413/425
4-1/4" Round. Weatherproof, incandescent trailer light functions as a stop, tail, and turn signal light. Wedge-base socket protects premium bulb for long life. Tongue-and-groove lens seal. ... Features: Combination trailer taillight serves 3 functions when properly mounted Stop lightTaillight Turn signal light Tongue-and-groove lens seals light to protect electrical connections against water and dust Premium bulb rated for up to 15,000 hours Wedge-base socket prevents premature bulb failure Durable polycarbonate housing Red lens over incandescent bulb Compatible with 12V DC systems Recessed mount with grommet (426-18 - sold separately) Flange mount with available bracket (424-09 - sold separately Accepts industry standard 3-prong plug (431-491 - sold separately) DOT compliant Made in the USA Specs: Dimensions: 4-1/4" diameter x 2-1/16" thick Bulb type: incandescent 1-Year limited warranty Manufacturer Cross Reference Light will work as an exact replacement for: Grote # 52770 and 52772 Truck Lite # 40042R Optronics # ST45RB PL-3 Wiring Connection This light has an industry-standard PL-3 connection as pictured above.
5-1/2" Diameter round. Waterproof, incandescent trailer light serves 3 functions: stop, turn, and tail. Shock-proof socket protects bulb. Surface mount with built-in flange. Accepts standard 3-prong plug. 1 bulb.Features: Red, round incandescent trailer light serves 3 functions Stop, turn, and tail Sealed, waterproof housing and lens unit Incandescent bulb is easy to replace Shock-proof socket protects bulb against damage Red lens over incandescent bulb Compatible with 12V DC systems Surface mount to trailer with built-in flange - hardware not included Accepts industry standard 3-prong plug (A45PB - sold separately) Specs: Dimensions: 5-1/2" diameter x 2" thick Distance between mounting holes (center on center): 4-1/4" Bulb type: incandescent 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Truck Lite # 40229R Peterson # M424R Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
5-1/2" Round. Incandescent trailer light functions as a stop, tail, and turn signal. Vibar socket absorbs road shock and vibration. Durable steel housing. Flush mount with built-in flange. 2-Wire design with power leads. (1) 1157 Bulb.Features: Combination trailer taillight serves 3 functions when properly mounted Stop lightTaillight Turn signal light Vibar socket absorbs road shock and vibration to prolong bulb life Incandescent bulb can be easily replaced Durable steel housing with powder coat finish resists rust and corrosion Red lens over incandescent bulb Compatible with 12V DC systems Flush mount with built-in mounting flange Requires 4-1/2" diameter hole for installation 2-Wire design includes power leads - grounds through mounting stud DOT compliant Made in the USA Specs: Dimensions: 5-1/2" diameter x 1-5/8" thick Light face dimensions: 4" diameter Distance between mounting holes (center on center): 4-1/4" Bulb type: 1157 Power draw at 12.8V: 2.2 amps 1-Year limited warranty Recessed-Mount Light Recessed-mount trailer lights install with a grommet, which is often sold separately.
4-1/4" Diameter round. Waterproof trailer light functions as a stop, tail, and turn signal light when properly mounted. Shock-proof socket protects incandescent bulb. Flush mount with grommet (sold separately). ... Features: Red trailer light serves 3 functions when properly mounted Stop lightTaillight Turn signal light Sonically sealed, waterproof housing and lens unit is submersible Shock-proof socket protects the bulb Durable polycarbonate lens and housing Red lens Flush mount with grommet (A45GB - sold separately) Accepts industry standard 3-prong plug (A45PB or A47PB - both sold separately) DOT compliant Specs: Overall dimensions: 4-1/4" diameter x 2-1/16" thick Power draw at 12.8V: Stop/turn: 2.4 amps Tail: 0.49 amps 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Uni Bond # SE4000R Wesbar # 423541 Truck Lite # 40282R/40202R Grote # 52922 Peterson # 426R Bargman # 40-01-001 Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
6-1/2" x 2-1/4" Oval. Waterproof trailer light functions as a stop, tail, and turn signal light when properly mounted. Shock-proof socket protects incandescent bulb. Flush mount with grommet (sold separately). ... Features: Red trailer light serves 3 functions when properly mounted Stop lightTaillight Turn signal light Sonically sealed, waterproof housing and lens unit is submersible Shock-proof socket protects the incandescent bulb Durable polycarbonate lens and housing Red lens Compatible with 12V DC systems Flush mount with grommet (A70GB - sold separately) Accepts industry standard 3-prong plug (A45PB or A47PB - both sold separately) DOT compliant Specs: Dimensions: 6-1/2" long x 2-1/4" tall x 2-3/8" thick Power draw at 12.8V: Stop/turn: 2.4 amps Tail: 0.50 amps 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Uni Bond # SE2238R Wesbar # 203561 Truck Lite # 60202R Grote # 52182 Peterson # 421R Bargman # 40-06-001 Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
4-1/4" Round. Weatherproof, incandescent trailer taillight serves as a stop, tail, and turn signal light. Wedge-base socket protects premium bulb for long life. Tongue-and-groove lens seal. ... Features: Combination trailer taillight serves 3 functions when properly mounted Stop lightTaillight Turn signal light Tongue-and-groove lens seals light to protect electrical connections against water and dust Premium bulb rated for up to 15,000 hours Wedge-base socket prevents premature bulb failure Durable polycarbonate housing Red lens over incandescent bulb Compatible with 12V DC systems Recessed mount with included grommet 3-Wire plug makes trailer connections DOT compliant Made in the USA Specs: Dimensions: 4-1/4" diameter x 2-1/16" thick Bulb type: incandescent 1-Year limited warranty Recessed-Mount Light Recessed-mount trailer lights install with a grommet, which is often sold separately.
4-5/16" Diameter round. Incandescent trailer light serves 3 functions: stop, turn, and taillight. Snap-on lens. Durable plastic housing. Stud mount to trailer with included studs. 2-Wire design. (1) 2057 bulb.Features: Incandescent trailer light serves 3 functions Stop, turn, and tail Incandescent bulb is easy to replace Shock-proof socket protects bulb against damage Durable plastic housing with snap-on lens Red lens over incandescent bulb Compatible with 12V DC systems Stud mount to trailer with included studs 2-Wire design includes power lead and ground wire Specs: Configuration: passenger side Driver side: ST25RB (sold separately) Dimensions: 4-5/16" diameter x 3-3/8" thick Distance between mounting studs (center on center): 2" Bulb type: 2057 Power draw at 12.8V: Stop/turn: 2.5 amps Tail: 1.0 amps 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Uni Bond # TL4402 Wesbar # 3050 Truck Lite # 80314R Grote # 50862 Peterson # 428S Bargman # 30-15-001
4-5/16" Diameter round. Incandescent trailer light serves 4 functions: stop, turn, tail, and license plate light. Snap-on lens. Durable plastic housing. Stud mount to trailer with included studs. 2-Wire design. (1) 2057 bulb.Features: Incandescent trailer light serves 4 functions Stop, turn, and tail Built-in license plate light illuminates trailer license plate Incandescent bulb is easy to replace Shock-proof socket protects bulb against damage Durable plastic housing with snap-on lens Red lens over incandescent bulb Compatible with 12V DC systems Stud mount to trailer with included studs 2-Wire design includes power lead and ground wire Specs: Configuration: driver side Passenger side: ST24RB (sold separately) Dimensions: 4-5/16" diameter x 3-3/8" thick Distance between mounting studs (center on center): 2" Bulb type: 2057 Power draw at 12.8V: Stop/turn: 2.5 amps Tail: 1.0 amps 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Uni Bond # TL4402L Wesbar # 3000 Truck Lite # 80319R / 80316R Grote # 50852 Bargman # 30-15-101
3-7/8" Diameter round. Incandescent trailer light serves 3 functions: stop, turn, and taillight. Screw-on lens. Durable steel housing. Stud mount to trailer with included studs. 2-Wire design. (1) 1157 bulb.Features: Incandescent trailer light serves 3 functions Stop, turn, and tail Incandescent bulb is easy to replace Shock-proof socket protects bulb against damage Durable steel housing with screw-on lens Red lens over incandescent bulb Compatible with 12V DC systems Stud mount to trailer with included studs 2-Wire design includes power lead and ground wire DOT compliant Specs: Configuration: passenger side Driver side: ST21RS (sold separately) Dimensions: 3-7/8" diameter x 3-1/16" deep Distance between mounting holes (center on center): 2" Bulb type: 1157 Power draw at 12.8V: Stop/turn: 2.3 amps Tail: 0.9 amps 3-Year limited warranty
3-7/8" Diameter round. Incandescent trailer light serves 4 functions: stop, turn, tail, and license plate light. Screw-on lens. Durable steel housing. Stud mount to trailer with included studs. 2-Wire design. (1) 1157 bulb.Features: Incandescent trailer light serves 4 functions Stop, turn, and tail Built-in license plate light illuminates trailer license plate Incandescent bulb is easy to replace Shock-proof socket protects bulb against damage Durable steel housing with screw-on lens Red lens over incandescent bulb Compatible with 12V DC systems Stud mount to trailer with included studs 2-Wire design includes power lead and ground wire DOT compliant Specs: Configuration: driver side Passenger side: ST20RS (sold separately) Dimensions: 3-7/8" diameter x 3-1/16" deep Distance between mounting holes (center on center): 2" Bulb type: 1157 Power draw at 12.8V: Stop/turn: 2.3 amps Tail: 0.9 amps 3-Year limited warranty
Filters
