Replaces the ACME threaded rod and threaded nut on your etrailer or Ram square, direct-weld jack with a 10,000-lb lift capacity and a 12,000-lb static capacity. Designed for TJD-12000 Series jacks.Features: Replaces the threaded ACME rod and lift nut from your etrailer and Ram square, direct-weld jacks with a 10,000-lb lift capacity and a 12,000-lb static capacity Designed for TJD-12000 Series
Replaces the gears and roll pins on your etrailer or Ram square, direct-weld, sidewind jack with a 5,000-lb or 7,000-lb capacity. Designed for TJD-5000S and TJD-7000S Series jacks.Features: Replacement gears and roll pins work with etrailer and Ram square, direct-weld, sidewind jacks that have a 5,000-lb or 7,000-lb capacity Designed for use with Ram TJD-5000S and TJD-7000S
Plunger pin secures the drop leg on your etrailer or Ram square, direct-weld trailer jack with a 10,000-lb lift capacity. Includes spring and cotter pin.Features: Plunger pin secures the drop leg on your etrailer or Ram square, direct-weld trailer jack with a 10,000-lb lift capacity Designed for TJD-12000 Series jacks Assembly includes pin, spring
Replaces the female pipe mount on your etrailer or Ram pipe-mount swivel trailer jack. 5/8" Pin hole diameter.Features: Replaces the female pipe on your etrailer or Ram pipe-mount swivel jack Specs: Diameter: Outer: 3" Inner: 2-1/2" Pin hole: 5/8" Length: Longer edge to center of pin hole
Replaces the gears and roll pins on your etrailer or Ram square, direct-weld trailer jack with a 10,000-lb lift capacity. Designed for TJD-12000 Series jacks.Features: Replacement gear kit works with etrailer and Ram square, direct-weld jacks that have a 10,000-lb lift capacity Designed for use with TJD-12000 Series jacks Kit includes 2 gears and 2 roll
Replaces the male pipe on your etrailer or Ram pipe-mount swivel jack. Pipe has an outer diameter of 2" and a pin hole diameter of 9/16".Features: Replaces the male pipe on your etrailer or Ram pipe-mount swivel jack Specs: Diameter: Outer: 2" Inner: 1-1/2" Pin hole: 9/16" Length: Longer edge to center of pin hole
Camper Jacks
Trailer Jack
Pipe Mounts
etrailer
2 Inch Pipe Mount
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
Replaces the gears and roll pins on your etrailer or Ram sidewind trailer jack with a 2,000-lb or 5,000-lb capacity. Designed for TJA-2000S Series and TJA-5000S Series jacks.Features: Replacement gear kit works with etrailer and Ram sidewind jacks that have a 2,000-lb or 5,000-lb lift capacity Designed for use with TJA-2000S Series and TJA-5000S Series jacks Kit includes
Replaces an individual bearing for your etrailer or Ram square trailer jack with a 7,000-lb capacity. Designed for direct-weld, TJD-7000 Series and pipe-mount swivel, TJDP-7000 Series jacks.Features: Replacement bearing works with etrailer and Ram square-tube jacks with a 7,000-lb capacity Designed for TJD-7000 Series and TJDP-7000 Series jacks Inner bearing diameter: 0.756" Outer
Replaces an individual bearing for your etrailer or Ram round-tube, topwind trailer jack with a 2,000-lb or 5,000-lb capacity. Designed for TJA-2000 Series and TJA-5000 Series jacks.Features: Replacement bearing works with etrailer and Ram round-tube, topwind jacks with a 2,000-lb or 5,000-lb capacity Designed for TJA-2000 Series and TJA-5000 Series jacks Outer diameter
Replaces the sidewind handle from your etrailer or Ram square, direct-weld, sidewind jack with a 7,000-lb capacity. Handle arm has a corrosion-resistant, zinc finish. Includes pins, bushings, and ... Features: Replaces the sidewind handle on your etrailer or Ram square, direct-weld, sidewind jack with a 7,000-lb capacity Designed for TJD-7000S Series jacks Durable, zinc-finished handle arm
Replaces an individual bearing for your etrailer or Ram round-tube sidewind trailer jack with a 2,000-lb or 5,000-lb capacity. Designed for TJA-2000S Series and TJA-5000S Series jacks.Features: Replacement bearing works with etrailer and Ram round-tube, sidewind jacks with a 2,000-lb or 5,000-lb capacity Designed for TJA-2000S Series and TJA-5000S Series jacks Specs: Outer
Replaces the manual emergency crank handle for your electric A-Frame jack (EJ-3520-BBX or EJ-3520-WBX).Features: Replaces the manual emergency crank handle for your electric A-Frame jack (EJ-3520-BBX or EJ-3520-WBX)
Replaces the rubber cap for the manual override hole of your etrailer or RAM electric trailer jack (EJ-3550).Features: Replaces the rubber cap that covers the manual override hole on your etrailer or RAM electric trailer jack (EJ-3550) Fits: etrailer or RAM electric trailer jacks: EJ-3550
Get more traction and stability on uneven ground than with 1-wheeled jacks. Dual wheelbase swivels 360 degrees for maximum maneuverability. Marine-grade zinc resists rust and corrosion.Features: Supports, lifts, and lowers your boat or recreational trailer Offers twice the stability of single-wheel jacks Wheelbase turns a full 360 degrees Swings up and down smoothly J-bolt handle
This A-frame jack has a retracted height of 7-1/8" and an extended height of 22-3/8". The drop leg offers 13-1/2" of lift on top of 15-1/4" of screw travel. Includes a sidewind ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Sidewind handle has zinc finish for attractive look and rust resistance Drop leg allows
Replacement right/street side jack works with your existing etrailer or Ram hydraulic setup. Offers 24-1/4" of travel and a 59" extension. Bolts on.Features: Replaces the right-side RAM square-tube leg from your etrailer or Ram hydraulic jack setup Hydraulic pump and power unit (e43VV) and left leg (e63VV) sold separately Works with units
Replaces the power switch on your electric A-frame jack with footplate (EJ-3520-BBX).Features: Replaces the power switch for your electric jack wth footplate (EJ-3520-BBX) Quantity: 1 power switch
Replacement left/curb side jack works with your existing etrailer or Ram hydraulic setup. Offers 24-1/4" of travel and a 59" extension. Bolts on.Features: Replaces the left-side Ram square-tube leg from your etrailer or Ram hydraulic jack setup Hydraulic pump and power unit (e43VV) and right leg (e73VV) sold separately Works with units
Replaces the cover on your etrailer or Ram electric A-frame jack (EJ-3520-BBX).Features: Replaces the cover with light lens on your etrailer or Ram electric A-frame jack (EJ-3520-BBX) Does not include switches or manual override cap Black color Quantity: 1 cover
Caster attaches to a 2" jack inner tube to make it easier to move your trailer. Easily removes for travel. Reduces jack's overall capacity to 1,200 lbs.Features: Removable jack caster provides light support and makes it easier to move your trailer Polyolefin construction is durable and long-lasting Clear zinc finish on wheel bracket provides
Replaces the 2" x 2" drop leg and footplate from your etrailer or Ram square, direct-weld trailer jack with a 7,000-lb capacity. Designed for TJD-7000 Series jacks.Features: Replaces the drop leg and foot from your etrailer or Ram square, direct-weld jack with a 7,000-lb capacity Designed for use with TJD-7000 Series jacks Offers an additional 13-1/2" of
Replaces the crank from your etrailer or Ram square, direct-weld jack with a 10,000-lb or 12,000-lb lift capacity. Handle allows you to manually crank the jack. Mounting hardware included. Designed ... Features: Replaces the sidewind crank handle from your etrailer or Ram square, direct-weld jack with a 10,000-lb or 12,000-lb lift capacity Designed for TJD-12000 Series jacks Durable steel
Replaces the sidewind handle from your etrailer or Ram square, direct-weld, sidewind jack with a 3K- 7K capacity. Handle allows you to manually crank the jack. Handle arm has a corrosion-resistant ... Features: Replaces the sidewind handle on your etrailer or Ram square, direct-weld, sidewind jack with a 3,000 - 7,000-lb capacity Designed for TJD-5000S and TJD-7000S Series jacks Durable
Replaces the sidewind handle from your etrailer or Ram swivel marine jack. Grooved handle grip allows for comfortable, easy cranking. Designed for MJ-1000BBX Series jacks.Features: Replaces the sidewind handle from your etrailer or Ram swivel marine jack Designed for use with MJ-1000BBX Series jacks Grooved, black handle grip allows for comfortable, easy cranking
Filters
