Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the male pipe on your etrailer or Ram pipe-mount swivel jack. Pipe has an outer diameter of 2" and a pin hole diameter of 9/16".
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at a replacement male pipe for etrailer and Ram Pipe Mount Swivel Jacks. This one is going to be made from 1/4 inch steel construction. It's got a raw finish so you don't really have to worry about any type of prep work when it comes to welling this onto your trailer frame. The tube outer diameter, outside edge to outside edge, is going to measure right at 2 inches. The inner diameter, inside edge to inside edge, is going to measure an inch and a half. The pinhole diameter on the unit, that's going to measure 9/16 of an inch.
There's going to be four pinholes going around the tube. If we take a measurement of the overall length, from edge to edge, we're looking at about 1 7/8 of an inch long. A few more measurements that I want to give you real quick . I'm going to measure from the outer edge on this side to the center of the pinhole. That's going to give us a measurement of about 3/4 of an inch. I'm going to do that same measurement from this side.
From this side to the center of the pinhole, we're looking at about 1 1/8 of an inch. Again, this is designed to be welded onto the frame of your trailer. Then a pipe mount jack would slide over this. The pinholes would line up, and then you'd secure it with a pin. This is going to give the jack that swivel point that it needs on the trailer frame, so that way you can bring your jack up to a stowed position, or you can swing it back down for use and secure it in either position.
That's going to do it for today's look at the replacement male pipe mount for etrailer and Ram Pipe Mount Swivel Jacks.
Average Customer Rating: 4.9 out of 5 stars (27 Customer Reviews)
Replaces the male pipe on your etrailer or Ram pipe-mount swivel jack. Pipe has an outer diameter of 2" and a pin hole diameter of 9/16".
I purchased this to add a separate storage point for my trailer jack. I have it mounted on the tub of the trailer in the back to protect it from road grime.
Quick service great product
I weld one of these on the equipment or trailer where I can store the jack without it being hit by sharp turning bumpers or tractor tires.
WORKS A INTENDED WITH THE JACK
Quality products as advertised and prompt shipping. Service was great and I received the correct parts the first time. This the first time I have ordered from e trailer and it won't be my last.
Awesome service!
Not much to say other than it worked as advertised. Fits all the jacks at my local farm and tractor supply.
Everything about etrailer is great
Works great. Heavy Duty.
looks great thank you!
Great job on your end.
Exactly what I needed. Service was gre at!
Works great. Satisfied with purchase.
exactly what i ordered
just what i need to make jack swing
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Damengineer
10/24/2017
great