You want to ride your trike where it's peaceful, out on the path, not just around the block again. This rack makes that happen. It includes ramps so you can load it on your own without asking for help or putting strain on your back.Sure, there are trikeracks out there, but most of them expect you to pick the whole thing up to load it, and if you're on your own that could be a deal breaker.
Take a recumbent delta or tadpole e-trike and an e-bike to your favorite trail with this hitch bike rack. Ratcheting frame hooks and adjustable wheel hoops securely hold your equipment. ... Features: Platform bike rack carries 1 e-trike and e-bike using your vehicle's hitch receiver Perfect for a recumbent delta e-trike, tadpole e-trike, or adult e-trike Ratcheting hooks on center mast hold bikes securely by the frame Adjustable wheel hoops with ratchet straps slide back and forth to eliminate bike-to-bike contact Universal hoops fit tires up to 5" wide Hand knobs allow for easy adjustments - no tools required 2 Tie-down straps secure the trike's frame to the rack Spring pins and removable snapper pin allow rack to tilt and fold Tilts down with bikes loaded to access cargo area Welded stop plate automatically aligns shank and hitch pin holes Eliminates need to get on your hands and knees to align hitch pin holes Anti-rattle handle reduces movement of rack in hitch receiver - no tools required Keyed-alike hitch lock, frame hooks, and security cable deter theft of your bikes and the rack Safety flags and reflective tape help keep the rack visible on the road Bolstered steel construction with black powder coat is rust resistant Specs: Application: 2" x 2" trailer hitch receivers Carrying capacity: 1 electric trike and 1 electric bike Weight capacity: 170 lbs (1) 90 lbs eTrike and (1) 80 lbs eBike (2) 80 lbs eBikes Maximum tire width: 5" Maximum wheelbase:60" Distance between bikes: 10" Shank rise: 7" Distance from face of hitch to: Closest part of rack when folded down: 7-1/2" Closest part of rack when folded up: 5" Farthest part of rack when folded down: 57" Farthest part of rack when folded up: 16-1/4" Carrier weight: 85 lbs Limited lifetime warranty Note: Sport Rider bike rack can be used on it's own for carrying 2 regular bikes or e-bikes, or you can install the Trike Adapter to carry 1 trike or e-trike and 1 bike or e-bike.
Add this adapter to your Sport Rider SE bike rack for electric bikes to transport 1 electric bike and 1 electric trike. Fits Sport Rider model HR1500.Features: Adapts your Sport Rider SE (HR1500) bike rack to carry 1 electric bike and 1 electric trike Accommodates different setups with adjustable mounting of wheel holder Wheel hoop adapter accommodates the smaller front wheels on recumbents and provides better clearance for 20" wheels Constructed of rust-resistant black powder coated steel to match Sport Rider look Attaches to arms of bike carrier with included hardware Includes 2 tie-down straps and orange safety flags Specs: Maximum track width: 36" Maximum wheel base: 60" Maximum trike weight: 90 lbs Maximum bike weight: 80 lbs Maximum combined weight: 170 lbs Limited lifetime warranty Notes: For use on a 2" (Class 3) hitch only - do not use a 1-1/4" to 2" adapter.
This hitch bike rack makes it easy to take 2 bikes to the trail. Ratcheting hooks hold bikes securely by the frame and lock to deter theft. Wheel hoops adjust for different wheelbases. ... Add-On Adapters If you want to use the rack to transport a kid's bike with 16" or smaller wheels, wheel hoop adapters (HRSW-ADP-2 - sold separately) are available. If you want to transport 1 recumbent delta trike or 1 recumbent tadpole-style trike with the Trail Rider, you can use the HRTRK-ADP adapter (sold separately).
This hitch-mount rack is perfect for carrying 2 recumbent bikes. It includes 2 sets of wheel hoops so you can transport bikes with extra-long wheelbases and bikes with standard-size wheelbases, and the trays fold up for compact storage.It also has a removable aluminum sleeve that lets you convert the rack for use in 1-1/4" hitches.
Your e-bikes matter, how you carry them should matter too. This rack holds your bikes by the wheels, so you're not scuffing paint every time you load up. And it tilts, so you can grab snacks or gear from the trunk without taking your bikes off.Slide the shank into the receiver, insert the pin, and tighten it down. This pulls the rack snug against the inside of the hitch to reduce sway and rattle while you drive. It also includes a 2" adapter so you can switch between hitch sizes without changing racks.
This easy-to-use hitch bike rack is an efficient way to get 4 bikes to the trail. Curved wheel trays and adjustable frame clamps fit a wide variety of bikes. Anti-rattle, locking hitch pin reduces rack movement while driving.The straps are padded and can be adjusted along the tray to ensure a perfect fit. Folding Design The rack folds up against the back of your vehicle when it's not in use. To raise the rack, just unscrew the knob and pull it out to lift the rack up.
We've handled a lot of racks and can confidently say the RV Rider is one of the few that can carry a couple 80-lb fat-tire e-bikes on the back of a motorhome or 5th wheel. ... These universal wheel hoops will fit standard and fat tires up to 5" wide. Folding, Tilting Design The rack tilts up and down, without bikes loaded, for storage and access to your rear cargo area. To lower the rack, remove the pin, hand knob, and carriage bolt, then tilt the rack down.
Lightweight and easy-to-use, this hitch bike rack is an efficient way to get 2 bikes to the trail. Curved wheel trays and adjustable frame clamps fit a wide variety of bikes. Anti-rattle, locking hitch pin reduces rack movement while driving.The straps are padded and can be adjusted along the tray to ensure a perfect fit. Folding Design The rack folds up against the back of your vehicle when it's not in use. To raise the rack, just unscrew the knob and pull it out to lift the rack up.
This hitch bike rack makes it easy to take 2 e-bikes to the trail. Ratcheting hooks hold your bikes securely by the frame and lock to deter theft. Wheel hoops adjust for different wheelbases. ... Lastly, use the integrated anti-wobble handle on the front of the shank to tighten the rack inside your hitch receiver and prevent it from rattling. Complete Security for Bikes and Rack The ratcheting hooks have lock cores in the release buttons so you can secure your bikes to the rack.
Your e-bike matters, how you carry it should matter too. This rack holds your bike by the wheels, so you're not scuffing paint every time you load up. And it tilts, so you can grab snacks or gear from the trunk without taking your bike off.Grab what you need and get back on the road. And when your bike isn't loaded, the rack folds up against your vehicle. This takes up less space, so you can keep the rack on your vehicle to park in your garage. Tool-Free Install Some platform racks make you line up the shank just right, thread in a long bolt, then tighten it down with a wrench.
This hitch bike rack makes it easy to take 2 standard or fat e-bikes to the trail. Ratcheting hooks hold bikes securely by the frame and lock to deter theft. ... Complete Security for Bikes and Rack The lock cores in the frame hooks hold the bike down on the rack and prevent them from moving. Also, the lock pod attaches to the hitch pin to secure the rack to your vehicle.
Your e-bikes matter, how you carry them should matter too. This rack holds your bikes by the wheels, so you're not scuffing paint every time you load up. And it tilts, so you can grab snacks or gear from the trunk without taking your bikes off.Grab what you need and get back on the road. And when your bikes aren't loaded, the rack folds up against your vehicle. This takes up less space, so you can keep the rack on your vehicle to park in your garage. Tool-Free Install Some platform racks make you line up the shank just right, thread in a long bolt, then tighten it down with a wrench.
Your e-bike matters, how you carry it should matter too. This rack holds your bike by the wheels, so you're not scuffing paint every time you load up. And it tilts, so you can grab snacks or gear from the trunk without taking your bike off.Slide the shank into the receiver, insert the pin, and tighten it down. This pulls the rack snug against the inside of the hitch to reduce sway and rattle while you drive. It also includes a 2" adapter so you can switch between hitch sizes without changing racks.
Heading out to the bike path or trail should be a low stress affair. The Crosstrack hitch rack keeps transport simple and your bikes supported with no frame contact, and it is easy to load and unload. Breathe, smile, and enjoy the ride!Features: Platform bike rack carries 2 bikes using your vehicle's 1-1/4" or 2" hitch receiver with included adapter Pivoting upright arms hold your bikes by the wheels Pre-marked bridges adjust for various bike tire sizes to ensure perfect fit Front wheel chocks can also be re-positioned Front-mounted hand lever lets you tilt and fold the rack with ease Tilts with bikes loaded to access cargo area Anti-rattle device and threaded hitch pin reduce movement of rack in hitch receiver Hitch pin and cable lock with matching keys deter theft of your bike and the rack E-coat and black powder coat treatment help the rack resist corrosion Specs: Application: 1-1/4" x 1-1/4 or 2" x 2" trailer hitch receivers Distance from center of hitch pin hole to nearest part of rack: Folded: 7-1/2" Deployed: 18-1/2" Carrying capacity: 2 bikes Weight capacity: 66 lbs per bike Maximum tire width: 4" Maximum wheelbase: 52" Wheel diameter: 20" - 29" Cable lock length: 8' Carrier weight: 66 lbs Construction: steel and aluminum Limited lifetime warranty Note: Approved for use on Class B RVs.
This platform rack is perfect for carrying heavy electric bikes. It includes a telescoping loading ramp that lets you easily roll your bikes onto the rack. ... When you're ready to raise the rack, simply pull it back up, pull the handle up, and tighten it down to secure the rack in place. It also folds up when not in use. This leaves a smaller footprint, so you can keep the rack on your vehicle to park in your garage.
Heading out to the bike path or trail should be a low stress affair. The Crosstrack hitch rack keeps transport simple and your bikes supported with no frame contact, and it is easy to load and unload. Breathe, smile, and enjoy the ride!Features: Platform bike rack carries 2 bikes using your vehicle's 2" hitch receiver Pivoting upright arms hold your bikes by the wheels Pre-marked bridges adjust for various bike tire sizes to ensure perfect fit Front wheel chocks can also be re-positioned Grooves stabilize varying tire widths Front-mounted hand lever lets you tilt and fold the rack with ease Tilts away with bikes loaded to access cargo area Integrated anti-rattle device reduces movement of rack in hitch receiver Hitch pin and cable lock with matching keys deter theft of your bike and the rack E-coat and black powder coat treatment help the rack resist corrosion Specs: Application: 2" x 2" trailer hitch receivers Distance from center of hitch pin hole to nearest part of rack: Folded: 7-1/2" Deployed: 18-1/2" Carrying capacity: 2 bikes Weight capacity: 66 lbs per bike Maximum tire width: 4" Maximum wheelbase: 52" Wheel diameter: 20" - 29" Cable lock length: 8' Carrier weight: 60 lbs Construction: steel and aluminum Limited lifetime warranty Note: Approved for use on Class B RVs.
This hitch bike rack makes it easy to take 2 e-bikes to the trail. Included LED bar provides brake light and turn signals so you stay safe and visible. ... LED Brake Light and Turn Signals To keep you visible and safe, the Hollywood Racks Sport Rider SE has LED brake lights and turn signals, so you don't have to worry about larger bikes blocking your vehicle's tail lights.
No need to leave the third bike behind. This CrossTrack kit carries 3 bikes without frame contact, holds heavier bikes up front, tilts for hatch access, folds up when you're done, and locks up so you can load up and roll out.Grab what you need and get back on the road. And when your bikes aren't loaded, the rack folds up against your vehicle. This takes up less space, so you can keep the rack on your vehicle to park in your garage. Tool-Free Install Some platform racks make you line up the shank just right, thread in a long bolt, then tighten it down with a wrench.
Carry 2 heavy e-bikes with less wrestling and more riding. This rack includes a ramp for easy loading, tilts for hatch access, and comes with a bag for carrying your e-bike battery.Locks and Anti-Rattle Security Included The included anti-rattle hitch pin helps take movement out of the connection between the rack and your hitch, while the hitch lock secures the rack to your vehicle. Locking frame clamps also help secure your bikes to the rack while you are away from the vehicle.
Carry cargo over your vehicle's roof with this sturdy roof rack. This no-drill system installs to raised side rails with simple tools. Crossbars work with traditional clamp-on accessories.Features: Crossbar system lets you carry cargo and accessories over your vehicle's roof Perfect for kayaks, SUPs, skis, snowboards, and more Sturdy square bars accommodate traditional clamp-on accessories Simple, no-drill installation to your vehicle's raised side rails Rugged, carbon steel construction with black powder coat finish stands up to the elements Complete system includes 2 crossbars, 4 brackets, and hardware Made in the USA Specs: Crossbar dimensions: 51" long x 1-1/4" tall x 1-1/4" wide Weight capacity: 165 lbs Always observe your vehicle's maximum roof load capacity 3-Year limited warranty Rugged and built to last, this roof rack system from Exposed Racks is a perfect fit for your outdoor lifestyle and an excellent complement to your vehicle. Thanks to the incredibly simple, no-drill installation, you'll be carrying your favorite recreational equipment in no time.
Carry up to 6 shovels, rakes, brooms or other straight-handle tools on your open utility trailer with this easy-to-use system. Included shelves have pre-cut holes for shovels to fit through. Designed to mount to Pack'em tower kit (PK-BM).
COMING SOON in May 2026! Swing-away hitch adapter with 250 lb capacity that pivots cargo to the passenger side for rear vehicle access. Features a sealed ball bearing pivot for smooth operation and stability.
This aerodynamic roof rack gives you the freedom to haul gear and cargo on your vehicle. Full-length aluminum crossbars offer plenty of space for channel mount and clamp-on accessories. ... Features: Complete roof rack system includes 2 Sportz crossbars, (4) 2500 Series legs, and a custom fit kit Aero-style crossbars pair with accessories that mount in the top channels or clamp around the bars Compatible with most bike, watersport, snow, and cargo carriers Works with Rhino Rack accessories that use Zwifloc fastening system Rubberized dual strips in top channels help reduce drag and wind noise Reduces channel splitting and guides airflow over the bars Lockable cover plates on legs secure rack to your vehicle Custom installation on your vehicle's naked roof .
Filters
