Replaces the crankhandle on your etrailer or Ram scissor jacks (TJSCHD-24). Handle allows you to manually crank the jacks.Features: Replaces the crankhandle on your etrailer or Ram 5,000-lb scissor stabilizer jack set (TJSCHD-24) Crankhandle allows you to manually crank your jacks
Replaces the crankhandle on your etrailer scissor jacks (e56VV and e96VV). Handle allows you to manually crank the jacks.Features: Replaces the crankhandle on your etrailer 2,500-lb and 7,500-lb scissor stabilizer jacks (e56VV and e96VV) Crankhandle allows you to manually crank your jacks
Replaces the crankhandle for your Stromberg Carlson electric trailer jack (JET-2500, JET-3555, JET-3755, or JET-5000). Allows you to manually crank your jack in case there is no electricity available.Specs: Socket size: 7/16" Features: Replaces the crankhandle on your Stromberg Carlson electric A-frame tongue jack Fits the following models: JET-2500, JET-3555, JET-3755, or JET-5000
Replace the crankhandle that came with your Lippert Components manual scissor jack with this new one. Crankhandle assists in lowering and raising your scissor jack on your RV or trailer.Features: Manual crankhandles can become easily lost at the campsite. Order your replacement crankhandle here! Standard Lippert Components manual scissor jackcrankhandle Can also be used with Lippert power tongue jacks in the event of a power failure 3/4" Hex socket 90-Day warranty
Replacement manual crank handle comes in handy in case of lost power at your campsite or a mechanism failure. Use the crank handle to manually raise and lower fifth-wheel landing gear.Features: Crankhandle manually retracts or extends your 5th-wheel landing gear legs in case of power or mechanical failure Can also be used with Lippert electric stabilizer jacks Overall length: 29"
You just backed your rig in, it's hot, and you aren't in the mood to crawl around in the gravel. Sound familiar? Skip the jack-lugging and crank-crawling. Grab your drill and drop both legs from one side before your drink has time to sweat.One-Side Adjustment: Deploys both legs from one side to save time at camp. Manual Backup Included: Crankhandle lets you operate it without a drill if needed. Tough Powder-Coated Finish: Wrinkle black coating helps protect against rust, chips, and grime.
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.Just slot the included drill attachment into your power drill's 1/2" chuck, remove the handle from the jack's driveshaft, and attach the drill in its place. Squeeze the trigger slowly to avoid too much torque off the bat.
... Simply turn the crank that powers the drive system and direct your trailer with the steering handle.The steering handle allows you to navigate the trailer to exactly where you want it. The gears allow you to switch the hand crank to adjust for inclined and flat ground.
Just pull the easy-to-access pin on this jack to drop the entire jack tube down for quick, easy adjustment. No drop leg needed. Seven height settings offer up to 12" of drop. Topwind handle allows for an additional 15-1/2" of screw travel.Features: Utility jack lets you raise and lower your A-frame trailer 7 Height settings allow for fast, easy positioning - no blocks or drop leg needed Lower the jack from the mounting bracket to get up to 12" of lift Manually crank the jack to achieve up to an additional 15-1/2" of travel Jack retracts to be flush with bottom of trailer frame Eliminates risk of damaging hang-ups or snags while traveling Can also be entirely removed from mount to provide clearance above frame for easy access to vehicle's rear hatch Low-friction ball screw minimizes resistance to reduce wear, noise, and heat Ball bearings roll smoothly through threads of jack screw - no direct, friction-inducing contact Steel construction is durable Zinc finish resists corrosion Topwind handle allows for simple crankingHandle radius is approximately 6-3/4" from center of mount to the outer edge of handle Mounting bracket can be welded or bolted on Footplate included Caster assembly and mounting hardware sold separately Specs: Bracket height: 1-3/4" with the jack fully retracted and the collar at the lowest setting 29-1/4" with the jack fully extended and the collar at the highest setting Total lift: 27-1/2" Travel by cranking the handle: 15-1/2" Drop tube: 12" - adjusts in increments of 2" Mounting bracket hole spacing (center on center): 3" x 3-1/4" Inner tubing diameter: 2" Outer tubing diameter: 2-1/4" Clearance from bottom of bracket to top of handle mount: 7-1/4" x 19-1/4" Lift capacity: 2,000 lbs Support capacity: 3,000 lbs 1-Year limited warranty The Ultimate Trailer Jack has a wide range of adjustability and it is easy to use, making it a dependable choice for your A-frame trailer.
... Manual crankhandle and drill bit included for flexible operation.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 2,500 lbs Quantity: 2 jacks Limited lifetime warranty
Powered A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 10-3/4", an extended height of 28-3/4", and 18" of travel. Extends 6" in 41 seconds with 1,000 lbs of tongue weight.The unit also comes with a manual crankhandle in case you lose power. This jack can be bolted or welded onto your A-frame coupler, or it can sit in a brace behind the coupler.
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.Just slot the included drill attachment into your power drill's 1/2" chuck, remove the handle from the jack's driveshaft, and attach the drill in its place. Squeeze the trigger slowly to avoid too much torque off the bat.
Get more traction and stability on uneven ground than with 1-wheeled jacks. Dual wheelbase swivels 360 degrees for maximum maneuverability. Marine-grade zinc resists rust and corrosion.Features: Supports, lifts, and lowers your boat or recreational trailer Offers twice the stability of single-wheel jacks Wheelbase turns a full 360 degrees Swings up and down smoothly J-bolt handle lets you position jack quickly Resists rust and corrosion with clear zinc finish Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crankjack without your hand getting smashed Bolts around trailer frame Includes mounting bracket and hardware Specs: Application: trailer frames 2" to 4" tall Lift capacity: 1,500 lbs Bracket height: Retracted: 12-5/8" Extended: 23" Screw travel : 10-3/8" Handle radius: 6-1/2" Inner tube diameter: 2" Outer tube diameter: 2-1/4" Dual-wheel dimensions: 5-3/4" diameter x 4" wide 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 5,000 lbs. It has 18" of travel and a 5" drop leg for extra lift. LED lights on both sides boost visibility at night.To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight. Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle.
These leveling scissor jacks with a 10,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. The bow-tie bases steady the jacks on soft surfaces. Handle included.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 8-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Black powder coat finish resists corrosion Handle included Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" diameter Lift capacity: 10,000 lbs 2,500 lbs per jack Quantity: 4 jacks Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Square-tube jack is ideal for supporting heavy pontoon or bowrider trailers. Footplate is more stable than caster wheels. Total lift is 15-3/8" of screw travel plus 13-3/4" of drop leg travel. Clear zinc finish resists rust.Features: Supports, lifts, and lowers your trailer Reduces time spent cranking when the drop leg is released Drop leg helps bridge the gap to the ground Provides more stability than wheeled jacks Footplate spreads the weight more evenly Minimizes sinking in soft ground Resists rust and corrosion with clear zinc finish Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crankjack without your hand getting smashed Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Bolts around trailer frame Includes mounting bracket and hardware Specs: Application: trailer frames up to 5" tall x 3" wide Lift capacity: 2,500 lbs Bracket height: Retracted: 7-1/4" Extended: 22-5/8" Total lift: 29-1/8" Screw travel : 15-3/8" Drop leg travel : 13-3/4" Inner tube width: 2" Outer tube width: 2-1/4" Mounting bracket dimensions: 6-1/2" long x 6-1/2" wide Handle radius: 7-7/8" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 3-1/2" Between center of hole on bottom and center of nearest hole 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack runs off your 7-way, lifting your trailer with a switch, while the drop leg adds the extra reach you need to dial in height before leveling.Just make sure your jack's rated for at least that much. It's fine to go bigger, as a higher-capacity jack often makes lifting easier. Important 7-Way Power Note for Some Ford Trucks This jack draws power through your vehicle's 7-way connector, and that setup may not work with many Ford F-150 trucks from 2015 and newer that use a smart 7-way.
Swing-up boat trailer jack is perfect for your small boat or jet ski trailer. 6" Caster swivels 360 degrees to make it easy to maneuver your trailer. Clear zinc finish fights rust and corrosion.Features: Supports, lifts, and lowers your boat or recreational trailer Swings up and down smoothly J-bolt handle lets you position jack quickly Makes it easy to move your trailer in tight spaces Caster turns a full 360 degrees Resists rust and corrosion with clear zinc finish Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crankjack without your hand getting smashed Bolts around trailer frame Includes mounting bracket and hardware Specs: Application: trailer frames 2" to 4" tall Lift capacity: 1,000 lbs Bracket height: Retracted: 13-1/2" Extended: 23-1/2" Screw travel : 10" Outer tube diameter: 2" Inner tube diameter: 1-3/4" Wheel dimensions: 5-3/4" diameter x 2" wide Handle radius: 7" 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
... Manual crankhandle and drill bit included for flexible operation.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allows for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black powder coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 7,500 lbs Quantity: 4 jacks Limited lifetime warranty
... Manual crankhandle and drill bit included for flexible operation.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 7,500 lbs Quantity: 2 jacks Limited lifetime warranty
After a long drive, the last thing you want is to crank your trailer jack by hand. This electric jack does the heavy lifting with a push of the switch, and the drop leg and foot plate help you get level fast so you can settle in and relax.For example, if your trailer (plus gear) weighs 30,000 lbs, your tongue weight will be 3,000 - 4,500 lbs. Just make sure your jack's rated for at least that much. Its fine to go bigger, as a higher-capacity jack often makes lifting easier. Specs: Capacity & Lift: Maximum capacity: 3,500 lbs Maximum travel: 18" (plus up to 4-1/2" extra with drop leg) Motor & Power: 12V electric motor Direct-wire pigtails (connects to trailer or vehicle power) LED work light Construction & Dimensions: Outer tube: 2-1/4" steel with e-coat and glossy black powder coat Inner tube: steel with white zinc plating Foot plate: removable, solid steel Drop leg: adjustable in 1-1/2" increments, up to 4-1/2" extra height Motor housing: black ABS plastic Included Accessories: Manual backup handle Mounting hardware: (3) 3/8"-16 x 1" grade 5 hex bolts, (3) 3/8" flat washers, (3) 3/8"-16 grade 5 nylon lock nuts Warranty: 2-Year
Filters
