You're wiring up a breakaway system and need a switch you can trust. This one's simple. Mount it to the frame, connect the leads, and hook up the pin. If the trailer disconnects, it pulls free and completes the circuit to trigger the brakes.
Simple, push-to-test button lets you check the charge on the battery in this breakaway kit. Complete kit brings your trailer to a safe stop if it separates from your vehicle. Built-in charger automatically charges battery while trailer is connected.
LED tester lets you easily check the battery's charge. Built-in charger pulls just enough power from your vehicle when your trailer is hooked up to make sure your breakaway battery stays charged and ready to go in case a disconnect ever occurs.
Bring your single-, double-, or triple-axle trailer to a stop should it become disconnected while towing. Includes a charger that maintains battery so you're always ready for an emergency and U-bolts so you can mount it to your trailer jack.
This breakaway kit brings your trailer to a safe stop by applying the brakes if the trailer completely separates from the tow vehicle. Built-in charger automatically charges battery (sold separately) while your trailer is connected.
Lead-acid batteries require no maintenance, which is why we love this kit. The built-in charger keeps the battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a complete stop. LED tester lets you check the charge.
4-1/2" x 5-3/8" Square trailer tail light is submersible. Integrated LEDs indicate if there's a fault in your trailer wiring. For trailers less than 80" wide. Includes industry-standard 3-prong plug. DOT and SAE compliant.Features: Trailer light serves 6 functions Stop light Tail light Turn signal Side marker Side reflex reflector Rear reflex reflector Built-in test lights let you troubleshoot Tail and stop/turn LEDs indicate if your trailer is receiving power Ground LED flashes to indicate a bad ground Submersible polypropylene construction is ideal for boat trailers Incandescent bulbs are easily replaceable Light accepts industry-standard 3-prong plug PL-3 pigtail harness included for trailers that don't have existing plug Surface mount with included studs Designed for trailers less than 80" wide DOT and SAE compliant Meets FMVSS 108 and CMVSS requirements Specs: Configuration: right hand (passenger's side) Dimensions: 4-1/2" tall x 5-3/8" wide x 2-9/16" deep Mounting studs: 2" apart on center Wire configuration: White: ground Red: stop/turn light Black: tail light Harness length: 10" 10-Year limited warranty Built-In LED Testers Verify Connection The Hopkins Smart Light makes it easy to diagnose faults in your trailer wiring. The Smart Light has 3 separate LEDs on the side of the unit that act as test lights.
This complete breakaway kit brings your trailer to a safe stop by activating the brakes if the trailer completely separates from the tow vehicle. Built-in charger automatically charges the included battery while your trailer is connected.
The battery case in this breakaway kit can clamp around your trailer frame or jack post. Kit brings your single-, double-, or triple-axle trailer to a stop should it become disconnected.
Lead-acid batteries require no maintenance, which is why we love this kit. The built-in charger keeps the battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a complete stop. LED tester lets you check the charge.
Replaces the 12-volt battery charger that came with your Curt Soft Trac breakaway kit. This charger wires to your tow vehicle's power source and to the battery in your breakaway kit.
The battery case in this breakaway kit clamps onto your trailer's frame or jack post and includes a trickle charger. Kit brings your single-, double-, or triple-axle trailer to a stop should it become disconnected from your tow vehicle.
LED tester lets you easily check the battery's charge. The built-in charger in this kit keeps your battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a stop should it become disconnected from your vehicle.
Unit flashes the lights on your single- or tandem-axle trailer while also activating its brakes if it disconnects from your vehicle. This way, not only will your trailer stop, but the flashing lights will also alert others on the road to the danger.
If you can't find a spot to mount your battery box on your trailer, this weld-on plate can give you one. Includes hardware that's spaced for your Hopkins Engager top-load breakaway kit. The kit installs easily once the plate is welded on.Features: Lets you easily install your Hopkins Engager top-load breakaway kit (20400) on your trailer frame or jack Gives you a surface to mount your battery box to when you don't have room otherwise Welds on so you don't have to drill into your trailer's frame Includes hardware perfectly spaced for your box - no stressing over lining up mounting holes Specs: Dimensions: 9-3/8" long x 5" wide x 1/16" thick Mounting bolt spacing: 7" From center of hole to center of hole horizontally 1-1/2" From center of hole to center of hole vertically Limited 90-day warranty
If you can't find a spot to mount your battery box on your trailer, this weld-on plate can give you one. Includes hardware that's spaced for your Hopkins Engager side-loading breakaway kit. the kit installs easily once the plate is welded on.Hopkins designed this base plate to fit the side-mount Engager breakaway kit. Install the base mount onto the trailer frame or trailer jack - no need to drill.
If you're tired of your breakaway switch cable dragging the ground or fraying, replace it with this coiled cable. Split ring lets you use this cable with any system. Easily attaches to tow vehicle with included carabiner.
Replaces the switch that came with your Curt trailer breakway kit. This switch signals your breakaway kit to activate your trailer's electric brakes in the event that your trailer accidently separates from your tow vehicle.
If you're tired of your breakaway switch cable dragging the ground or fraying, this kit is going to be your perfect solution. It features a coiled cord, so there's no need to wrap cable around your trailer frame to prevent dragging.
Replace your trailer breakaway device with this durable switch kit that features a coiled cord. No more dragging or fraying. No need to wrap cable around your trailer frame.
If you're tired of your breakaway switch cable dragging the ground or fraying, replace it with this coiled cable. It easily attaches to your tow vehicle with the included carabiner. Includes switch plunger. Fits most pin-style systems.
Filters
