The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12" x 2" Assemblies have rust-resistant, e-coated backing plates to protect from debris. Fits 14.5" to 16.5" wheels.Features: Self-adjusting brakes let you maintain optimal braking power at all times Ensures reliable contact between the brake shoes and drums Prevents uneven wear on brake shoes Easier to install and gives you more control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed Automotive-grade brake pads offer superior quality, smooth operation, and excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Tapered edges on pads minimize stuttering and brake lockup Adjuster plugs (included) protect internal components from dirt, grime, and road debris E-coat on backing plates fends off rust Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Mounting bolts and hardware (BRKH12) sold separately QAI , CSA , and SAE-N certifications ensure quality Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, Lippert (LCI), and AL-KO/Hayes Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15", 16", and 16-1/2" Axle rating: 5,200 lbs, 6,000 lbs, and 7,000 lbs Limited 1-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 10" x 2-1/4" Assemblies have rust-resistant, e-coated backing plates to protect from road debris. Fits 13" to 15" wheels.Features: Self-adjusting brakes let you maintain optimal braking power at all times Ensures reliable contact between the brake shoes and drums Prevents uneven wear on brake shoes Easier to install and gives you more control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed Automotive-grade brake pads offer superior quality, smooth operation, and excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Tapered edges on pads minimize stuttering and brake lockup Adjuster plugs (included) protect internal components from dirt, grime, and road debris E-coat on backing plates fends off rust Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Mounting bolts and hardware (BRKH10B) sold separately QAI , CSA , and SAE-N certifications ensure quality Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, Lippert (LCI), and AL-KO/Hayes Dimensions: 10" diameter x 2-1/4" wide Mounting flange bolt pattern: 4 bolt Wheel size: 13", 14", and 15" Axle rating: 3,500 lbs Limited 1-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes.
These drum brakes are easy to work with from start to stop. 12" x 2" Assemblies fit 14.5" to 16" wheels. Fits AL-KO/Hayes axles with 4-bolt flanges or non-AL-KO axles with standard 5-bolt flanges. Made in the USA.Features: Easier to install and gives you more control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed Periodic manual adjustment required Can be done in minutes Long-lasting brake pads offer excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Adjuster plugs (included) protect internal components from dirt, grime, and road debris Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Mounting hardware sold separately Made in the USA Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, and Lippert (LCI) Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: AL-KO/Hayes 4 bolt or standard 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs Limited 5-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes.
The automotive-grade pads on these brakes offer lasting effectiveness. Both 7" x 1-1/4" assemblies have rust-resistant, e-coated backing plates. Fits 10" to 13" wheels.Features: Easier to install and gives you more control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed Periodic manual adjustment required Can be done in minutes Automotive-grade brake pads offer superior quality, smooth operation, and excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Tapered edges help minimize stuttering and brake lockup Adjuster plugs (included) protect internal components from dirt, grime, and road debris E-coat on backing plates fends off rust Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Mounting bolts included - nuts and lock washers (BRKH7) sold separately QAI , CSA , and SAE-N certifications ensure quality Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, Lippert (LCI), and AL-KO/Hayes Dimensions: 7" diameter x 1-1/4" wide Mounting flange bolt pattern: 4 bolt Wheel size: 10", 12", and 13" Axle rating: 2,000 lbs Limited 1-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes.
Anodized aluminum electric-hydraulic actuator lets you use your brake controller (sold separately) to activate your trailer's hydraulic brakes. Includes rust-resistant marine-grade gasket and stainless steel hardware. Vented plate releases heat.Manufacturer Vehicle Years/Controller Models Compatible Compatible if Used with HBA-CAM Vehicles Ford 2005-2006 Yes 2007-2008 No Yes 2009-2015 Yes Dodge 2010-2015 Yes GMC/Chevy 2007-2015 No Yes Brake Controllers Draw-Tite Activator (5100) Yes Activator II (5500 or 5510) Yes Activator III (5520) Yes Activator IV (5504) Yes Hayes Energize III (81741B) Yes Energize III+ (HA81742B) Yes Energize XPC (HA81745) Yes Engage (HA81760) Yes G2 Brake Boss (81792BB) Yes Syncronizer (HA81725) Yes Endeavor (81770) Yes Genesis (HA81790) Yes Blackbird (HA81726) Yes Hopkins Impulse Digital (47325) Yes Insight (HM47297) Yes Brake Force (47225) No Reliance (47284) No Agility (47294 or 47295) No Maxbrake Brake Controller Yes Redline Redline TA900 Yes RedlineTA900A No RedlineTA1000 No RedlineTA1100 No RedlineTA1200 No Tekonsha Prodigy (90185) Yes Prodigy P2 (90885) Yes Prodigy P3 (90195) Yes Primus IQ (TK90160) No PowerTrac (39523) Yes Voyager (39510 or 9030) Yes Valley VA32812 Blackbird Yes VA32811 Phantom Yes
Electric-hydraulic brake actuator with brake lines lets you use an electric brake controller from inside your vehicle to adjust and control your trailer's hydraulic brakes. Enjoy convenience as you achieve greater braking control and performance.Application Table Manufacturer Vehicle Years/Controller Models Compatible Compatible if Used with HBA-CAM Vehicles Ford 2005-2006 Yes 2007-2008 No Yes 2009-2015 Yes Dodge 2010-2015 Yes GMC/Chevy 2007-2015 No Yes Brake Controllers Drawtite 5500 Activator II Yes 5510 Activator II Yes Hayes 81741B Energize III Yes 81760 Engage Yes 81792K G2 Yes 81725 Syncronizer Yes 81770 Endeavor Yes Hopkins Impulse Digital 47325 Yes Insight 47297 Yes Brake Force 47225 No Reliance 47284 No Agility 47295 No Maxbrake Brake Controller Yes Redneck Redline TA900 Yes RedlineTA900A No RedlineTA1000 No RedlineTA1100 No RedlineTA1200 No Tekonsha 90185 Prodigy Yes 90885 P2 Yes 90195 P3 Yes 90160 Primus IQ No 9030 Voyager Yes Valley VA32812 Blackbird Yes VA32811 Phantom Yes Table applies to HBA-10 with serial numbers 313800 and higher and HBA16 with serial numbers 506100 and higher.
Anodized aluminum electric-hydraulic actuator lets you use your brake controller (sold separately) to activate your trailer's hydraulic drum brakes. Vented end plate releases heat. Includes hardware. Hydraulic lines and breakaway sold separately.Manufacturer Vehicle Years/Controller Models Compatible Compatible if Used with HBA-CAM Vehicles Ford 2005-2006 Yes 2007-2008 No Yes 2009-2015 Yes Dodge 2010-2015 Yes GMC/Chevy 2007-2015 No Yes Brake Controllers Draw-Tite Activator (5100) Yes Activator II (5500 or 5510) Yes Activator III (5520) Yes Activator IV (5504) Yes Hayes Energize III (81741B) Yes Energize III+ (HA81742B) Yes Energize XPC (HA81745) Yes Engage (HA81760) Yes G2 Brake Boss (81792BB) Yes Syncronizer (HA81725) Yes Endeavor (81770) Yes Genesis (HA81790) Yes Blackbird (HA81726) Yes Hopkins Impulse Digital (47325) Yes Insight (HM47297) Yes Brake Force (47225) No Reliance (47284) No Agility (47294 or 47295) No Maxbrake Brake Controller Yes Redline Redline TA900 Yes RedlineTA900A No RedlineTA1000 No RedlineTA1100 No RedlineTA1200 No Tekonsha Prodigy (90185) Yes Prodigy P2 (90885) Yes Prodigy P3 (90195) Yes Primus IQ (TK90160) No PowerTrac (39523) Yes Voyager (39510 or 9030) Yes Valley VA32812 Blackbird Yes VA32811 Phantom Yes
Anodized aluminum electric-hydraulic actuator lets you use your brake controller (sold separately) to activate your trailer's hydraulic drum brakes. Vented end plate releases heat. Includes hardware. Hydraulic lines and breakaway sold separately.Manufacturer Vehicle Years/Controller Models Compatible Compatible if Used with HBA-CAM Vehicles Ford 2005-2006 Yes 2007-2008 No Yes 2009-2015 Yes Dodge 2010-2015 Yes GMC/Chevy 2007-2015 No Yes Brake Controllers Draw-Tite Activator (5100) Yes Activator II (5500 or 5510) Yes Activator III (5520) Yes Activator IV (5504) Yes Hayes Energize III (81741B) Yes Energize III+ (HA81742B) Yes Energize XPC (HA81745) Yes Engage (HA81760) Yes G2 Brake Boss (81792BB) Yes Syncronizer (HA81725) Yes Endeavor (81770) Yes Genesis (HA81790) Yes Blackbird (HA81726) Yes Hopkins Impulse Digital (47325) Yes Insight (HM47297) Yes Brake Force (47225) No Reliance (47284) No Agility (47294 or 47295) No Maxbrake Brake Controller Yes Redline Redline TA900 Yes RedlineTA900A No RedlineTA1000 No RedlineTA1100 No RedlineTA1200 No Tekonsha Prodigy (90185) Yes Prodigy P2 (90885) Yes Prodigy P3 (90195) Yes Primus IQ (TK90160) No PowerTrac (39523) Yes Voyager (39510 or 9030) Yes Valley VA32812 Blackbird Yes VA32811 Phantom Yes
Anodized aluminum electric-hydraulic actuator lets you use your brake controller (sold separately) to activate your trailer's hydraulic brakes. Includes rust-resistant marine-grade gasket and stainless steel hardware. Vented plate releases heat.Manufacturer Vehicle Years/Controller Models Compatible Compatible if Used with HBA-CAM Vehicles Ford 2005-2006 Yes 2007-2008 No Yes 2009-2015 Yes Dodge 2010-2015 Yes GMC/Chevy 2007-2015 No Yes Brake Controllers Draw-Tite Activator (5100) Yes Activator II (5500 or 5510) Yes Activator III (5520) Yes Activator IV (5504) Yes Hayes Energize III (81741B) Yes Energize III+ (HA81742B) Yes Energize XPC (HA81745) Yes Engage (HA81760) Yes G2 Brake Boss (81792BB) Yes Syncronizer (HA81725) Yes Endeavor (81770) Yes Genesis (HA81790) Yes Blackbird (HA81726) Yes Hopkins Impulse Digital (47325) Yes Insight (HM47297) Yes Brake Force (47225) No Reliance (47284) No Agility (47294 or 47295) No Maxbrake Brake Controller Yes Redline Redline TA900 Yes RedlineTA900A No RedlineTA1000 No RedlineTA1100 No RedlineTA1200 No Tekonsha Prodigy (90185) Yes Prodigy P2 (90885) Yes Prodigy P3 (90195) Yes Primus IQ (TK90160) No PowerTrac (39523) Yes Voyager (39510 or 9030) Yes Valley VA32812 Blackbird Yes VA32811 Phantom Yes
Hub-and-drum fits 9K to 10K general-duty Dexter axles manufactured before July 2009. Inner bearing (387A) and race, outer bearing (25580) and race, oil seal, cap, wheel bolts, and lug nuts included. Oil bath system allows for easy maintenance.
Upgrade the oil/grease cap, O-ring, and plug on your AL-KO, Dexter, or Rockwell axle. Aluminum alloy body dissipates heat and magnetic vent plug removes damaging metal particles. Easy access side port lets you add or drain lube without removing cap.Features: Upgrade from a basic oil or grease cap to a heavy-duty cap designed for long-term use in all climates Fits these axles: AL-KO, Hayes, QRG, or Rockwell 9K-16K axles manufactured after 1996 Replacement for these AL-KO, Dexter, Hayes, or Rockwell oil caps: AL-KO: 1531029 Dexter: K71-859-00 Hayes: K568220 Rockwell: 12011-1 Cap functions as either an oil bath or grease cap Magnetic vent plug attracts damaging metal particles Helps identify problems before they become critical Aluminum alloy body with black e-coat finish resists corrosion Clear viewing lens lets you quickly check oil level Easy-access side port lets you fill or drain lubricant without removing the cap O-ring and gasket provide a tight seal Threaded cap installs easily Includes 1 cap, 1 watertight O-ring seal, 1 plug, and 1 magnetic vent plug Specs: Application: 9,000-lb to 16,000-lb axles (AL-KO/Hayes/QRG, and Rockwell American after 1996) Thread outer diameter: 3.75" 5-Year limited warranty
12" x 2" Passenger's-side electric trailer brake assembly fits 6,000-lb axles. Mounting flange has AL-KO/Hayes 4-bolt or standard 5-bolt pattern. Fits 14-1/2" to 16" wheels.Features: Electric brakes are easier to install and offer more user control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes Mounting bolts sold separately Made in the USA Specs: Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO Configuration: right hand (passenger's side) Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: AL-KO/Hayes 4-bolt or standard 5-bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs Limited 5-year warranty
12" x 2" Driver's-side electric trailer brake assembly fits 6,000-lb axles. Mounting flange has AL-KO/Hayes 4-bolt or standard 5-bolt pattern. Fits 14-1/2" to 16" wheels.Features: Electric brakes are easier to install and offer more user control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes Mounting bolts sold separately Made in the USA Specs: Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO Configuration: left hand (driver's side) Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: AL-KO/Hayes 4-bolt or standard 5-bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs Limited 5-year warranty
A basic factory cap does the job, but it doesn't give you much extra protection. Upgrade to an aluminum Hydro-Shield cap that seals out water and grit, while the clear lens lets you check lubricant before the next haul.Replaces the oil bath/grease cap, O-ring, and plug on these axles: AL-KO, Hayes, QRG, or Rockwell 9K-16K axles manufactured after 1996 Cap is a replacement for these oil caps: AL-KO: 1531029 Dexter: K71-859-00 Hayes: K568220 Rockwell: 12011-1 Keep Water and Grit Out: Hydro-Shield Seals the Hub Water and road grit can work their way past a basic cap and contaminate the lubricant around your bearings.
12" x 3-3/8" Passenger's-side electric trailer brake assembly fits 8,000-lb AL-KO / Hayse axles. Mounting flange has a 4-bolt pattern. Self-adjusting brakes require little maintenance. Fit 16" or larger wheels.Features: Electric brakes are easier to install and offer more user control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary Self-adjusting brakes automatically adjust to deliver optimum performance and braking power No need for manual brake adjustments Proper adjustment leads to better brake efficiency and less wear on your tow vehicle's brakes Mounting bolts and hardware included Adjuster plugs sold separately Made in the USA Specs: Application: most standard hub-and-drum assemblies including Dexter, Lippert (LCI), and AL-KO/Hayes Configuration: right hand (passenger's side) Dimensions: 12" diameter x 3-3/8" wide Mounting flange bolt pattern: 4 bolt Fits AL-KO / Hayse axles only Wheel size: 16" or larger Axle rating: 8,000 lbs
Install your Hayes electric trailer brake controller quickly and easily with this custom wiring adapter. One end plugs into the controller, and the other plugs into the built-in port beneath your vehicle's dash.Features: Plug-in wiring adapter allows for quick, simple installation of your electric trailer brake controller No cutting or splicing required Custom connector end plugs into the built-in port beneath the dash of your vehicle Opposite end plugs into the back of your electric brake controller Compatible with time-delayed and proportional brake controllers from Hayes Made in the USA Installation of Hayes Brake Controller Adapter To install your Hayes electric brake controller, you need to connect the wiring of the controller to your vehicle.
10" x 1-1/2" Driver's-side electric trailer brake assembly fits 3,000-lb axles. Mounting flange has a 4-bolt pattern. Fits 13" to 15" wheels.Features: Electric brakes are easier to install and offer more user control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes Mounting bolts and hardware included Made in the USA Specs: Application: most standard hub-and-drum assemblies including Dexter, Lippert (LCI), and AL-KO/Hayes Configuration: left hand (driver's side) Dimensions: 10" diameter x 1-1/2" wide Mounting flange bolt pattern: 4 bolt Wheel size: 13" to 15" Axle rating: 3,000 lbs
10" x 1-1/2" Passenger's-side electric trailer brake assembly fits 3,000-lb axles. Mounting flange has a 4-bolt pattern. Fits 13" to 15" wheels.Features: Electric brakes are easier to install and offer more user control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes Mounting bolts and hardware included Made in the USA Specs: Application: most standard hub-and-drum assemblies including Dexter, Lippert (LCI), and AL-KO/Hayes Configuration: right hand (passenger's side) Dimensions: 10" diameter x 1-1/2" wide Mounting flange bolt pattern: 4 bolt Wheel size: 13" to 15" Axle rating: 3,000 lbs
Install your Hayes electric trailer brake controller quickly and easily with this custom wiring adapter. One end plugs into the controller, and the other plugs into the junction box beneath your vehicle's dash.Features: Plug-in wiring adapter allows for quick, simple installation of your electric trailer brake controller No cutting or splicing required Custom connector end plugs into the electric junction box beneath the dash of your vehicle Opposite end plugs into the back of your electric brake controller Compatible with time-delayed and proportional brake controllers from Hayes Made in the USA Installation of Hayes Brake Controller Adapter To install your Hayes electric brake controller, you need to connect the wiring of the controller to your vehicle.
Install your Hayes electric trailer brake controller quickly and easily with this custom wiring adapter. One end plugs into the controller, and the other plugs into the built-in port beneath your vehicle's dash.Features: Plug-in wiring adapter allows for quick, simple installation of your electric trailer brake controller No cutting or splicing required Custom connector end plugs into the built-in port beneath the dash of your vehicle Opposite end plugs into the back of your electric brake controller Compatible with time-delayed and proportional brake controllers from Hayes Made in the USA Installation of Hayes Brake Controller Adapter To install your Hayes electric brake controller, you need to connect the wiring of the controller to your vehicle.
Magnet kit with green wire allows you to replace the worn out magnet on 10" trailer brakes, rather than having to replace the entire assembly. The oval design increases the efficiency while also extending the life of the magnet.Features: Magnet kit allows you to replace the worn out magnet on your 10" trailer brakes Saves money and time - better than replacing the entire assembly Works with the following brake assemblies: Dexter 10" x 2-1/4" 3,500-lb Nev-R-Adjust (23-468 and 23-469) Dexter 10" x 2-1/4" 3,500-lb (23-26 and 23-27) Hayes/AL-KO 10" x 2-1/2" 3,500-lb (60202803 and 60202703) Oval magnet design Increases the efficiency Extends the life Sleeve protects wires Magnet dimensions: 3-1/2" long x 2-1/8" wide x 7/8" tall
Install your Hayes electric trailer brake controller quickly and easily with this custom wiring adapter. One end plugs into the controller, and the other plugs into the junction box beneath your vehicle's dash.Features: Plug-in wiring adapter allows for quick, simple installation of your electric trailer brake controller No cutting or splicing required Custom connector end plugs into the electric junction box beneath the dash of your vehicle Opposite end plugs into the back of your electric brake controller Compatible with time-delayed and proportional brake controllers from Hayes Made in the USA Installation of Hayes Brake Controller Adapter To install your Hayes electric brake controller, you need to connect the wiring of the controller to your vehicle.
Install your Hayes electric trailer brake controller quickly and easily with this custom wiring adapter. One end plugs into the controller, and the other plugs into the built-in port beneath your vehicle's dash.Features: Plug-in wiring adapter allows for quick, simple installation of your electric trailer brake controller No cutting or splicing required Custom connector end plugs into the built-in port beneath the dash of your vehicle Opposite end plugs into the back of your electric brake controller Compatible with time-delayed and proportional brake controllers from Hayes Made in the USA Installation of Hayes Brake Controller Adapter To install your Hayes electric brake controller, you need to connect the wiring of the controller to your vehicle.
Filters
