Don't Miss These Holiday Savings!
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Install your Hayes electric trailer brake controller quickly and easily with this custom wiring adapter. One end plugs into the controller, and the other plugs into the built-in port beneath your 's dash.
Features:
To install your Hayes electric brake controller, you need to connect the wiring of the controller to your vehicle. Certain auto manufacturers offer pre-wired options, typically known as tow packages, in which the wiring is run for you from the dash to the trailer connector on the back of your vehicle. Usually when this is done, a port is installed at your dash so that you can easily plug in a brake controller.
This adapter plugs into the 6-pin connector on your vehicle's built-in brake control wiring harness. The harness is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal.
No hardwiring is required to install this adapter. After you plug it into the factory port, you simply plug the other end of the adapter directly into your electric trailer brake controller. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time to transfer it to another vehicle or securely stow it away.
Average Customer Rating: 5.0 out of 5 stars (22 Customer Reviews)
Install your Hayes electric trailer brake controller quickly and easily with this custom wiring adapter. One end plugs into the controller, and the other plugs into the built-in port beneath your vehicle's dash.
Nissan Titan pulling a fully loaded 14x7 Cargo Mate Blazer enclosed trailer. The unit was pretty easy to install. etrailer included the proper wiring harness for my Titan. It is not difficult to find the proper brake setting for the load size and not hard to tweak on the fly. This unit worked like a charm while hauling this large load about 1000 miles. So far it has been worth every penny and I got it at a great price!
I needed to tow with my Nissan NV2500 HD cargo van. I bought this with a brake controller and both work fantastic. I had also bought an adapter here for my Nissan Frontier and it is working great as well. I can’t say for other manufacturers, but if you plan to outfit your Nissan to tow, this is the place to get the harnesses, adapters or hardware you need.
First of all I'd like to say kudos to e-trailer for getting a brake controller and wiring to my house in Vermont from their place in Missouri overnight. I was shocked when It got here so fast, they saved my vacation. I really like the Hayes brake controller it works very well and is predictable. It's also very easy to set up once it's all connected. It was a breeze to install particularly on my 2006 Nissan Titan, it was two plugs, and stick it on the dash, and I was done. The only thing I need now is a bigger better truck to pull my 8000 pound trailer up to the speed limit, never did make it. The Nissan is a bit week for the job and it overheated a couple of times on hills and I had to turn on the heater to drain extra heat and bring the temperature back down, no AC allowed. But the trip went well nonetheless. My next truck will be diesel with dual wheels four-wheel-drive, no monkeying around next time. Thanks e-trailer! I'll be back to get my gear for my next truck from e-trailer for sure??
Customer service was friendly and knowledgeable in directing me towards this direct fit product. Price was very reasonable and shipping was fast. Product fits into existing connected under driverdashboard and literally snaps together in seconds. Used zip ties to make slight excess wire neat under dashboard and prevent any future snapping any excess.
Would buy from etrailer again! Quick de livery!
Great product - The brake controller was ordered for my 2012 Nissan Armada, it plugged into the factory wiring harness and was installed in 30 minute.
Service was excellent! This is the way all e-purchases should be handled. Confirmation e-mail, delivery tracking and delivery confirmation. - Thanks
Connected with no problem to my 05 Nissan titan
Shipping was quick. The wiring harness made installation very easy. Overall very impressed with the controller. Everything from start to finish was perfect. Installation took about 15 min. Would highly recommend.
Easy installation. No problems in the year I have had it. Works great. Trailer brakes activate smoothly even at low speed
Plugs together easy install 1 minute
Fit perfectly. Love the helpful installation videos for all the products.
Worked well with 1 connection at harness on 2019 Nissan frontier. I am a 25 year auto mechanic and this is one anyone can do.... good product and seems well made. Rev. Tucker
Associate was very helpful on the phone, the cable I needed came very quickly and was installed easily. thank you
Does the job it was made for.
Quick and easy! Quality construction
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Howard
4/27/2021
works good for my 25 RV