7-9/16" x 3-5/16" Oval. Waterproof trailer utility light provides bright white light where needed. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not ... single unit, which means that water will not get into the light and damage the diodes or circuit board. Surface-MountLight Surface-mountlights install flat against the surface of the trailer, so a hole
6-1/2" x 2-3/8" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate lens and housing. Surface ... power and ground. And the plug covers the unused third point on the connection to seal it against dirt and moisture. Surface-MountLight Surface-mount trailer lights install using a flange or bracket with
4-5/16" x 2" Oblong. Low profile LED light illuminates your RV or trailer's exterior with bright white light at a downward angle. Durable die-cast aluminum housing and polycarbonate ... illuminating an outdoor area Sealed, waterproof housing and lens unit LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No
7-1/2" x 3-1/4" Oval. Waterproof light serves 4 functions: brake, tail, turn, and backup light. Red lens is set inside of clear lens. Mounts on surface of trailer with built-in flange - ... the light and damage the diodes or circuit board. Surface-MountLight Surface-mountlights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the
7-9/16" x 3-5/16" Oval. 3-Function, waterproof LED light acts as brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not ... Surface-mountlights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting
4-5/16" Waterproof light displays brake, tail, and turn signals on your trailer. Mounts in a cutout with a grommet (sold separately) and works with 3-prong plugs. separately) if you don't have one already. How to Mount Trailer Light This light installs in a grommet (A45GB - sold separately) and requires cutting a hole into your trailer if it doesn't have one
5-1/2" Diameter round. Waterproof trailer light serves 3 functions: stop, turn, and tail. Durable polycarbonate lens and housing. Mounts on trailer with built-in flange. Accepts standard 3-prong ... for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens
11" Weatherproof light displays brake, tail, and turn signals on your trailer. Built-in reflector increases light output. Mounts on the surface of your trailer and hardwires with the included ... Features: Rectangular brake, tail, and turn signal light Glows for tail light Brightens for brake light Flashes for turn signal light Built-in reflective lens increases light output White LEDs with
15" x 1-3/8". Low-profile LED tail light serves 3 funtions on trailers over 80" wide. Durable polycarbonate housing and lens. Surface mount - hardware not included. 3-Wire design., waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no
7-9/16" Waterproof light displays brake, tail, and turn signals on your trailer, and mounts to the surface with the built-in flange so you don't need to cut a hole in your trailer. Hardwires ... hardwires to trailer DOT compliant Specs: Overall dimensions: 7-9/16" long x 3-5/16" tall x 3/4" thick Light dimensions: 6-1/2" tall x 2" wide Distance between mounting holes (center
4-5/16" Round. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Recessed mount with grommet (sold separately). Accepts ... against dirt and moisture. Recessed-MountLight Recessed-mount trailer lights install underneath a housing or a grommet (A45GB - sold separately). These lights will extend into the mounting surface and
13-5/8" x 10-7/8" Rectangle. LED utility light illuminates an exterior area with bright white light. Durable aluminum construction with silver powder coat resists corrosion. Mountsflush to ... Features: Low-profile, rectangle LED lamp delivers bright, focused light to illuminate wide areas Flush-mount design delivers a sleek, unobtrusive look LEDs make great replacements for incandescent
6" Oval. All-in-one waterproof trailer light serves 4 functions: brake, tail, turn, and backup light. Hardwired and ready to install. Red lens set inside clear lens. Flushmount with built-in ... red LEDs for tail light Clear lens with white LEDs for backup lightFlushmount with built-in black flange - hardware not included Hardwired and ready to install DOT compliant Meets FMVSS 108
13-5/8" x 10-7/8" Rectangle, LED utility light illuminates an exterior area with bright white light. Durable aluminum construction with black powder coat resists corrosion. Mountsflush to ... Features: Low-profile, rectangle LED lamp delivers bright, focused light to illuminate wide areas Flush-mount design delivers a sleek, unobtrusive look LEDs make great replacements for incandescent
5-1/2" Round. Low-profile waterproof light serves 4 functions: brake, tail, turn, and backup light. Mounts on surface of trailer with built-in flange - hardware not included. 4-Wire pigtail with ... Features: Round trailer tail light serves 4 functions Stop light Tail light Turn signal light Backup light Sonically sealed, waterproof housing and lens unit is submersible LED lights are highly
Triple LED tail light serves 3 functions: brake, tail, and turn. Clear lens with 33 colored diodes. Fully sealed, waterproof construction. Mountsflush into the body of your RV or trailer. Flush-mount design provides a smooth, sleek look - hardware not included Hardwire connection points on back of light require splicing into your existing wiring DOT compliant Meets FMVSS 108 and CMVSS
On the job or on the road, this 6-inch grommet light handles warnings and signals in one slim package. IP68 sealed, sonically welded, and plug-and-play with an AMP plug, it keeps you compliant and ... ) Current - Tail: 0.075 A (± 0.012 A) Current - Reverse: 0.575 A (± 0.085 A) Plug: Dual AMP Mounting: Grommet LED color: Amber Lens color: Clear only This all new light from TecNiq combines all the
6-7/16" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Recessed mount with grommet (sold separately). Accepts ... Features: Oval backup light for trailers and utility trucks Certified for backup light function in a 2-lamp system when a pair of lights is installed (second light sold separately) Sonically sealed
6-1/2" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights are installed. Smooth X-shape crosses the light face. Recessed mount with ... (BK70BB - sold separately) to make it easier to mount the light on your trailer. Recessed-MountLight Recessed-mount trailer lights install underneath a housing or a grommet, which is often sold separately
7-1/2" x 3-1/4" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate housing. Recessed mount ... housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle
7-9/16" x 3-5/16" Oval. Waterproof 3-function LED trailer tail light acts as a brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - ... lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. Surface-MountLight Surface-mountlights install
6-1/2" x 2-3/8" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate lens and housing. Recessed ... connection to seal it against dirt and moisture. Recessed-MountLight Recessed-mount trailer lights install underneath a housing or a grommet (A70GB) sold separately. These lights will extend into the mounting
10-1/8" x 3-1/16" Oval. 4-Function, waterproof light acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface with built-in flange - hardware ... circuit board. Surface-MountLight Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often
7-1/2" x 3-3/8" 4-Function, waterproof light acts as brake, tail, turn, and backup light. TecNiq red and clear lens creates a solid panel of light. Mounts to trailer surface with built-in ... ground Yellow wire for reverse Red wire for stop/turn Black wire for tail Meets or exceeds FMVSS 108 standards Specs: Quantity: 1 tail light Dimensions: 7-1/2" long x 3-3/8" tall x 1-5/8"
Filters
