Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
We have a very similar entry door lock with the Bauer Products Camper Door Lock #BA65FR. The configuration appears to be very similar to the lock on your 2004 Featherlight horse trailer. The Bauer lock is made to fit a cutout 5-1/4" wide x…
view full answer...You are correct and the linkage does need to be replaced. For that you would want the part #LC379160 which matches what you have. My contact at Lippert technical confirmed that two washers, not four, are supplied with the Kwikee Step Gear/Linkage…
view full answer...I reached out to Valterra for the dimensions of the Valterra RV Toilet Floor Gasket with Hold Down Bolts #Q23653VP, and they sent me the accompanying dimensional diagram. It has an outer diameter of 4-3/4", an inner diameter of 3-1/4" and…
view full answer...The best option we have for you is the Continuous Stainless Steel Hinge part #SH300. This hinge is 6' long, 3" wide, and has 1" long knuckles. The overall length of the hinge will be an exact fit but the width will be about 1/4"…
view full answer...For a 200 lb trailer ramp door we have the Conventional Ramp Door Spring part #362SA8HD which would work great as it has a 230 lb capacity. You'd need to have a professional wind it for you but it would easily work great for a 200 lb trailer ramp…
view full answer...I do have some great full replacement options for you but the motors are not replaceable on trailer tongue jacks. There might be one or two out there which are but none of the dozens we carry ever have that option. Instead, I recommend the Phoenix…
view full answer...Our Bauer door lock part #BA64FR is the same as the BP-12 that you mentioned so this will work great.
view full answer...We do have the BP 12 ETP you are looking for with the part #BA64FR.
view full answer...You would not need to brace the roof of your Wells Cargo trailer to install the part #V2110SP-24. You would just need to cut the appropriate sized hole (14-1/4 by 14-1/4 inch) and then it would be read to install. For an install kit that comes with…
view full answer...I strongly recommend the TremPro 644 Silicone Sealant #0160297. I used this sealant on my trailer when I replaced a roof vent about 4 years ago and it is still going strong. This sealant does a great job at holding up to dramatic temperature changes…
view full answer...The #CB250D96SHD is designed to work with trailer ramp doors that open from the top and when fully opened create a ramp used for loading the trailer. The brackets that are attached to the door are typically placed at the top of the door(top of door…
view full answer...Thank you for the detailed photo, it was a great help. The latches are actually not designed to fit the thickness of the door so you could use whichever size would allow the pin to catch in the door lip. f you were able to make it so the door did not…
view full answer...Filter Your Search
Contact and Help