Replaces the pull pin for your Bulldog 8,000-lb sidewind, pipe-mount swivel jack (BD190756 or BD190758) or Crownjack with 7,000-lb capacity. Chain secures to side of the jack so you don't lose the pin.Features: Replaces the pull pin for your Bulldog 8,000-lb sidewind, pipe-mount swivel jack (BD190756 or BD190758) or Crownjack with 7,000-lb capacity Chain secures to side of the jack so you don't lose the pin Specs: Pin diameter: 5/8" Pin length: 4-1/4" Features: Bulldog 8,000-lb sidewind, pipe-mount swivel jacks: BD190756 and BD190758 Crownjacks with 7,000-lb capacity
These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. ... Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
Powered A-frame jack automatically extends and retracts to your set height - no more holding a switch while the jack gets into position. Jack has 18" of screw travel. ... In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
Manual jacks get old fast when you're trying to hitch up or level. This 3,500 lb electric A-frame jack runs off your 7-way, lifting your trailer with a switch, while the drop leg adds the extra reach you need to dial in height before leveling.Just make sure your jack's rated for at least that much. It's fine to go bigger, as a higher-capacity jack often makes lifting easier. Important 7-Way Power Note for Some Ford Trucks This jack draws power through your vehicle's 7-way connector, and that setup may not work with many Ford F-150 trucks from 2015 and newer that use a smart 7-way.
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.How to Pick the Right Trailer Jack Capacity Your jack needs to lift the tongue weight, usually 10 to 15% of your trailer's total weight. For example, if your trailer weighs 10,000 lbs fully loaded, your tongue weight will typically be around 1,000 to 1,500 lbs.
Manual jacks get old fast when you're trying to hitch up or level. This 3,500 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.How to Pick the Right Trailer Jack Capacity Your jack needs to lift the tongue weight, usually 10 to 15% of your trailer's total weight. For example, if your trailer weighs 6,000 lbs fully loaded, your tongue weight will typically be around 600 to 900 lbs.
Smooth and powerful hydraulic jack lifts your heavy load without your help. Just press the button on the corded remote control to lift and lower your trailer. The large, pivoting foot pad stabilizes the jack even on rough terrain.Features: Hydraulic jack Ideal for use with horse and livestock trailers, as well as commercial and construction trailers Smooth and effortless operation, even for heavy loads Self-contained pump and power unit comes attached to the jack Convenient corded remote control switch Large, pivoting foot pad stabilizes on uneven surfaces Square tube Durable exterior-grade black finish Easy bolt-on installation Specs: Screw travel: 24-1/4" Bracket height: 34-7/8" Retracted 59" Extended Lift capacity: 12,000 lbs Support capacity: 15,000 lbs 500W 12V DC dual motor Reservoir capacity: 2.5 quarts Maximum pump load: 3,000 psi Working pressure: 1,500 psi Mounting tabs: 7-1/2" x 4" Foot pad: 10" long x 10" wide 1-Year warranty
Perfect for campers, RV travelers, and anyone using a trailer, these jacks make life easier and more enjoyable. They're designed with comfort and convenience in mind, helping you save time and energy for what matters most - your journey.Power Connection: Wires directly to 12-volt power source Automatic Reset, No Hassle: The 20A automatic reset relay fuse protects the jacks motor from overloads or short circuits and resets itself automatically, no need for spares or replacements Nighttime Convenience: LED courtesy light on front of jack makes nighttime setup simple Protective Cover: Canvas cover shields your jack from the suns harmful rays and harsh weather Emergency Backup: Manual crank included for peace of mind when needed Moisture Protection: Rubber cover over the crank opening keeps out moisture and the elements Durable Finish: Tough black powder coat finish resists rust and corrosion Specs: Lift: 18" Lift capacity: 5,000 lbs Dimensions: Overall height: 29-1/2" Mounting plate height: 8-7/8" Footplate diameter: 5-1/2" Outer tube diameter: 2-1/4" Motor voltage: 12 volts 2-Year warranty
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack runs off your 7-way, lifting your trailer with a switch, while the drop leg adds the extra reach you need to dial in height before leveling.Just make sure your jack's rated for at least that much. It's fine to go bigger, as a higher-capacity jack often makes lifting easier. Important 7-Way Power Note for Some Ford Trucks This jack draws power through your vehicle's 7-way connector, and that setup may not work with many Ford F-150 trucks from 2015 and newer that use a smart 7-way.
Black powder coated A-frame jack has a retracted height of 8-3/8" and an extended height of 24". The external gearbox is easily accessible, and the zinc-finished sidewind handle arm provides a sleek look.Features: Utility jack lets you raise and lower your A-frame trailer Sidewind handle has zinc finish for attractive look and rust resistance Black powder coat finish resists corrosion External gearbox is easily accessible Effortless greasing with built-in grease zerk Footplate or caster sold separately Specs: Bracket height (from bottom of inner tube to bottom of bracket): 8-3/8" Retracted 24" Extended Travel: 15-5/8" Clearance: 15" from bottom of bracket to top of jack Outer tube diameter: 2-1/4" Inner tube diameter: 2" Handle radius: 8" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
Weld-on, pipe-mount swivel jack pivots up for travel, down for use. Square design provides side-load support. Retracted height is 14-1/2". Extended height is 29-1/2". ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Square jack provides more side-load capacity than round-tube jacks Belly band welded to the outer tube provides extra strength Sidewind handle has zinc finish for attractive look and rust resistance Drop leg allows for increased lift and saves time when raising or lowering Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included female pipe mount Specs: Jack height (from bottom of foot to center of pipe mount): 14-1/2" Retracted 29-1/2" Extended Total lift: 28-1/2" Screw travel: 15" Drop leg travel: 13-1/2" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Outer tube width: 2-1/2" Inner tube width: 2-1/4" Footplate dimensions: 8" long x 6" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 8-1/8" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Square-tube jack is ideal for supporting heavy pontoon or bowrider trailers. Footplate is more stable than caster wheels. Total lift is 15-3/8" of screw travel plus 13-3/4" of drop leg travel. ... In fact, a jack with a higher capacity should operate more efficiently, allowing you to spend less time cranking and more time fishing.
Heavy-duty 25K capacity, 2-speed jack is perfect for any demanding job that requires a gooseneck trailer. Retracted height is 8-1/4" and extended height is 18", plus 8" of drop leg travel using the plunger pin.Features: Industrial-sized jack lets you raise and lower your gooseneck trailer Ideal for demanding agricultural, construction, and industrial work Companion square jack (TJD-25100) and cross shaft sold separately Standard 2-Speed gear design Drop leg with spring return increases overall extension for maximum adjustability Side-positioned plunger is easier to align than a pin and clip (and you won't pinch your fingers) Hands-free spring return lets you retract the leg using your foot Round footplate minimizes sinking in soft ground Easy maintenance Built-in grease zerks Strong, stable, durable, industrial-sized tubing Black painted inner and outer tubes Includes sidewind handle Weld on installation Specs: 2-Speed gear: High gear: 1" every 4-1/2 turns Low gear: 1" every 34-1/2 turns Height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Travel: 13" Drop leg travel: 11-1/2" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" from center of hole to center of hole Outer tube width: 4-3/8" Inner tube width: 4" Rod shaft diameter: 1" Outer tube length: 25" Footplate diameter: 9-7/8" Lift capacity: 25,000 lbs 1-Year warranty
Perfect for campers, RV travelers, and trailer users, these jacks make adventures easier and more enjoyable. Designed for convenience and reliability, they save time and energy, so you can focus on what truly matters - your journey.Power Connection: Wires directly to 12-volt power source Automatic Reset, No Hassle: The 20A automatic reset relay fuse protects the jacks motor from overloads or short circuits and resets itself automatically, no need for spares or replacements Nighttime Convenience: LED courtesy light on front of jack makes nighttime setup simple Protective Cover: Canvas cover shields your jack from the suns harmful rays and harsh weather Emergency Backup: Manual crank included for peace of mind when needed Moisture Protection: Rubber cover over the crank opening keeps out moisture and the elements Durable Finish: Tough black powder coat finish resists rust and corrosion Warranty: Limited lifetime warranty Specs: Lift: 18" Lift capacity: 3,500 lbs Dimensions: Overall height: 29-1/2" Mounting plate height: 8-7/8" Footplate diameter: 5-1/2" Outer tube diameter: 2-1/4" Motor voltage: 12 volts 2-Year warranty
These compact, user-friendly scissor jacks are a must-have to keep your RV level and stable. They adjust from 5" to 29". Bow-tie bases steady the jacks on soft surfaces. ... Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allows for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black powder coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 7,500 lbs Quantity: 4 jacks Limited lifetime warranty
With a jack on each side of your trailer, it's easy to get it up off the ground for routine maintenance or a roadside emergency. The bolt-on mounting plates give you a lot of freedom to place the jacks where you want them, with no welding.Here's what we love about this kit: 2 Jacks. Place one on each side of your trailer and get it up off the ground 2 Bolt-on mounting plates. No welding! Put them where you want them Includes bolts and hardware Swivel design.
Heavy-duty jacks stabilize your lightweight cargo or camper trailer. Legs telescope to the ground when you release the lever. Jacks swing up for storage. ... Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
These compact, user-friendly scissor jacks are a must-have to keep your RV level and stable. They adjust from 5" to 29". Bow-tie bases steady the jacks on soft surfaces. ... Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 2,500 lbs Quantity: 2 jacks Limited lifetime warranty
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. The durable jack screw offers increased strength. Get maximum lifting power in low gear and fast cranking in high gear.Features: 2-Speed jack lets you raise and lower your trailer Low gear offers full lifting power High gear provides ultimate speed Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the side Durable 1-1/4" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle has curved edges - no sharp ends Handle can be secured for travel with included weld-on clip Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Total lift: 25-7/8" Screw travel: 12-3/8" Drop leg travel: 13-1/2" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Get more traction and stability on uneven ground than with 1-wheeled jacks. Dual wheelbase swivels 360 degrees for maximum maneuverability. Marine-grade zinc resists rust and corrosion.In fact, a jack with a higher capacity should operate more efficiently, allowing you to spend less time cranking and more time fishing.
Heavy-duty 25K capacity, 2-speed jack is perfect for any demanding job that requires a gooseneck trailer. Retracted height is 8-1/4" and extended height is 18", plus 8" of drop leg travel using the plunger pin.Features: Industrial-sized jack lets you raise and lower your gooseneck trailer Ideal for demanding agricultural, construction, and industrial work Companion square jack (TJD-25100) and cross shaft sold separately Standard 2-Speed gear design Drop leg with spring return increases overall extension for maximum adjustability Side-positioned plunger is easier to align than a pin and clip (and you won't pinch your fingers) Hands-free spring return lets you retract the leg using your foot Round footplate minimizes sinking in soft ground Easy maintenance Built-in grease zerks Strong, stable, durable, industrial-sized tubing Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Weld on installation Specs: 2-Speed gear: High gear: 1" every 4-1/2 turns Low gear: 1" every 34-1/2 turns Height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Travel: 13" Drop leg travel: 11-1/2" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" from center of hole to center of hole Outer tube width: 4-3/8" Inner tube width: 4" Rod shaft diameter: 1" Outer tube length: 25" Footplate diameter: 9-7/8" Lift capacity: 25,000 lbs 1-Year warranty
... The bow-tie bases steady the jacks on soft surfaces. Handle included.Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
These compact, user-friendly scissor jacks are a must-have to keep your RV level and stable. They adjust from 5" to 29". Bow-tie bases steady the jacks on soft surfaces. ... Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allows for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 2,500 lbs Quantity: 4 jacks Limited lifetime warranty
Swing-up boat trailer jack is perfect for your small boat or jet ski trailer. 6" Caster swivels 360 degrees to make it easy to maneuver your trailer. Clear zinc finish fights rust and corrosion.In fact, a jack with a higher capacity should operate more efficiently, allowing you to spend less time cranking and more time fishing.
Filters
