BoatTrailer Roller BunkBracket for Dutton-Lainson Roller BunksFeatures: Roller bunkbracket, for mounting galvanized Roller Bunks models Fits: DL21740 (model #6387) and DL21741 (model #6388) Sold individually 4 Needed to mount a pair of roller bunks Die-formed of heavy gauge steel plate TUFFPLATE finish Measurement between slotted holes from center to center: 1-1/4" Zinc plated yellow chromate TUFFPLATE finish has three times the corrosion resistance of standard zinc plated trivalent chrome process and 30 percent greater corrosion resistance when compared to powder coated finish.
Dutton-Lainson roller bunkbracket for boattrailers.Features: Roller bunkbracket for mounting Dutton-Lainson standard roller bunks Fits: DL21754 (model 6345) and DL21755 (model 6355) Formed of heavy gauge steel plate TUFFPLATE finish Sold individually 4 Needed to mount a pair of roller bunks Specs: Overall length: 10-3/4" Overall width: 3" Inside width: 2-3/4" Slot length: 7-1/4" Slot width: 7/16" Slots center-to-center: 1-1/4" Top bracket to the start of the slots: 3" Top of bracket to the end of the slots: 10-3/8" Hook: 1-3/4" wide Hole diameter: 3/8" Zinc plated yellow chromate TUFFPLATE finish has three times the corrosion resistance of standard zinc plated trivalent chrome process and 30 percent greater corrosion resistance when compared to powder coated finish.
Heavier pontoons need more contact to ride steady. This wide 6-3/16" galvanized bracket spreads the load across your bunks, keeping tubes square on rough hauls while resisting spray and saltwater season after season.Straightforward Install: Slotted brackets make placement simple for a tidy, reliable setup. Features to know about Pontoon BunkBrackets for Even, Scuff-Free Support Your pontoon will ride at its best when your bunks carry the tubes evenly.
Uneven tubes can leave scuffs and make loading stressful. This galvanized bracket lines up your 6' and 4' bunks so your pontoon settles square, cutting down on rub marks and standing strong against spray and saltwater.Straightforward Install: Slotted brackets make placement simple for a tidy, reliable setup. Features to know about Pontoon BunkBrackets for Even, Scuff-Free Support Your pontoon will ride at its best when your bunks carry the tubes evenly.
When bunk boards are not lining up with the hull, these bolster brackets give you room to adjust. Slotted holes let you raise or lower the bunks so the boat sits evenly and loads more smoothly onto the trailer.Features to know about Bolster Brackets for BoatTrailerBunk Boards These bolster brackets let you mount and fine-tune the height of your trailersbunk boards so the boat sits evenly and loads smoothly.
When vertical bunks shift, your boat stops loading straight. These brackets keep bunk boards upright and aligned on aluminum trailers so tall hull sides stay guided for smoother launches and straighter loading.Features to know about Vertical BunkBrackets for Aluminum BoatTrailers Vertical bunks help guide and steady your boat's tall sides, and these brackets keep those bunks locked in place.
Since the picture you submitted belongs to Karavan I can't post it here on our site, but if you check out the attached picture you can see how a very similar trailer had a set of rollers like the part #CE27710 installed. For a set of swivel…
Your current tires are about 21.9 inches in diameter when inflated. We don't offer any tires compatible with 12 inch wheels that would be any taller than that, so to gain more height you'd need to go up to a 13 inch wheel and use a 175/80-13…
I took a look at Kendon's website and confirmed that the trailers made before 2014 have ST175/80R13 bias ply tires on them. With this in mind you will want the Loadstar ST175/80D13 Bias Trailer Tire item #AM3S160. This has a galvanized 13" x…
The easiest first step here would be to try the trailer on a different truck, and see if the same problem occurs. If the trailer brakes are free until the trailer is plugged in, I suspect that something is mis wired. I would suggest examine the…
Usually when electric trailer brakes lock up it is because the brake pin on the trailer side connector is getting constant power. If you are using a 6-Way trailer connector or a 7-Way to 6-Way adapter then the likely cause is that the 12 volt circuit…
The tire pressure rating for a wheel comes from the valve stem and the Dexstar Steel Spoke Trailer Wheel part #AM20532 does not have one. Therefore, there is no tire pressure rating until you add one like the Americana Metal, Bolt-In Valve Stem part…
I spoke with my contact at BoatBuckle and they told me that the metal components on the BoatBuckle Pro Series Kwik-Lok Transom Tie-Down Straps, part #IMF17632, are made of steel but they are not stainless. They told me the hook that attaches to the…
To gain more height you will want to trade out your brackets with taller ones. We have the following options: CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies - 10-1/4" - Qty 4 #CE10191GA-4 CE Smith Bolster and Swivel Bracket…
I spoke with my contact at CE Smith, and they said the Bolster and Swivel Bracket Assembly for Boat Trailers, like part #CE10000G, do not bear the weight of the boat. The U-bolt that attaches the brackets to the trailer frame support the weight of…
The #CE10002G-4 CE Smith Bolster and Swivel is 13" tall. Assuming you mount it at the position to gain the most height, you should have 9" remaining. Losing the height from attaching to the 3" crossmember leaves you with 10"…
Actually, the width of a trailer is determined by it's widest point. If the wheels are outside of the frame of the trailer then the width is measured for that trailer from outside of the fender to outside of the fender on the other side of the…
Your current tire should have some type of code on it that indicates its size. The Kenda K371 Bias Trailer Tire, #AM10002, is size 4.80/4.00-8. It fits on 8 by 3-3/4 inch rims. It sounds like the 46 and 27 inch measurements you have given are the…
When vertical bunks shift, your boat stops loading straight. These brackets keep bunk boards upright and aligned on aluminum trailers so tall hull sides stay guided for smoother launches and straighter loading.Features to know about Vertical BunkBrackets for Aluminum BoatTrailers Vertical bunks help guide and steady your boat's tall sides, and these brackets keep those bunks locked in place.
When bunk boards are not lining up with the hull, these bolster brackets give you room to adjust. Slotted holes let you raise or lower the bunks so the boat sits evenly and loads more smoothly onto the trailer.Features to know about Bolster Brackets for BoatTrailerBunk Boards These bolster brackets let you mount and fine-tune the height of your trailersbunk boards so the boat sits evenly and loads smoothly.
When bunk boards are not lining up with the hull, these bolster brackets give you room to adjust. Slotted holes let you raise or lower the bunks so the boat sits evenly and loads more smoothly onto the trailer.Features to know about Bolster Brackets for BoatTrailerBunk Boards These bolster brackets let you mount and fine-tune the height of your trailersbunk boards so the boat sits evenly and loads smoothly.
Rub marks, squeaks, or crooked loading? A swivel bolster adds a little pivot so the bunk sits flush to your hull. You set the height, it spreads the boat's contact, and you'll load your boat smoother while protecting it's finish.Made for the Ramp: Hot-dip galvanized steel holds up to spray, rain, and road grit. Non-Slip Stability: Dimples help lock the bunk in place, boost load capacity and keep your boat steady when loading. Features to know about Adjustable BoatTrailerBunkBracket for Centered, Scuff-Free Loading When a boat loads crooked or rubs the same spot every trip, it's usually a bunk alignment issue, not the hull.
Keep your boat from drifting or rubbing the trailer. This 8" galvanized bracket secures side bunks that guide and steady your hull, with hot-dip protection against spray and saltwater.Sold Individually: Includes 1 bracket for setup on vertical bunks. Features to know about Vertical BunkBrackets for Aluminum BoatTrailers Vertical bunks help guide and steady your boat's tall sides; this bracket keeps them locked in place.
Rub marks, squeaks, or crooked loading? A swivel bolster lets you pivot your bunk so it sits flush to your hull. You set the height, it spreads the boat's contact, and you'll load your boat smoother while protecting it's finish.Features to know about Centered, Scuff-Free Loading Swivel bolster brackets let you adjust your bunk boards to where they should be, so the hull sits right and loading feels smooth. The 2-3/4" vertical slot gives you the wiggle room to dial in bunk height for your boat, and the non-slip dimples bite into the board to prevent movement and boost load capacity.
Guide your boat on straight every time. This 10" galvanized bracket secures side bunks that guide and steady your hull, with hot-dip protection against spray and saltwater.Sold Individually: Includes 1 bracket for setup on vertical bunks. Features to know about Vertical BunkBrackets for Aluminum BoatTrailers Vertical bunks help guide and steady your boat's tall sides; this bracket keeps them locked in place.
This bolster bracket supports your pontoon boattrailer's bunks. Constructed of corrosion-resistant galvanized steel with a sturdy base, it helps you to properly align your 6" or 8" wide bunk boards on your trailer.Features: Heavy-duty bracket mounts to your pontoon boattrailer's frame or crossmembers and allows you to mount 2 bunk boards Stabilizes bunk boards when 2 brackets are used (other bracket sold separately) Does not include mounting hardware Wide base provides a strong mounting platform Slotted mounting hole allows for adjustment during installation 1/8" Thick, galvanized steel construction is sturdy and resists corrosion Made in USA Specs: Quantity: 1 bracket Application: 6" and 8" wide bunk boards Dimensions: 15-1/2" long x 3" wide x 6" tall Mounting slot dimensions: 7-1/2" long x 1/2" wide This bracket holds two 2"x6" or 2"x8" bunk boards angled toward each other to provide support for one of the boat's pontoons.
This bolster bracket supports your boattrailer's bunk. Constructed of corrosion-resistant galvanized steel, it helps you to properly align your bunk boards and provides years of reliable use.Features: Bolster bracket mounts to your pontoon boattrailer's frame or crossmembers and allows you to mount 2 bunk boards Stabilizes bunk boards when 2 brackets are used (other bracket sold separately) Does not include mounting hardware 3/8" Thick, galvanized steel construction is sturdy and resists corrosion Made in USA Specs: Quantity: 1 bracket Base length: 2-1/2" Arm length (each): 8-1/8" Diameter of mounting holes (each): 7/16" This bracket holds two bunk boards angled toward each other to provide support for one of the boat's pontoons.
Easily raise or lower your boattrailer's bunk board with this slotted, zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Slotted design lets you adjust the height of the bracket during installation Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3-1/2" long Slot dimensions: 1-1/4" long x 3/8" wide
Help keep your boat in place when it's loaded on your trailer with this zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3" long Mounting hole diameter: 1/2"
Help keep your boat in place when it's loaded on your trailer with this zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3-1/2" long Mounting hole diameter: 1/2"
This lightweight and corrosion-resistant aluminum swivel bracket attaches to a bolster bracket on your trailer. It lets you tilt your bunk board to the proper angle, ensuring that the boat's hull fits snugly during transport.Features: Swivel bracket lets you tilt the bunk board on your boattrailer Helps you to fit the boat hull snugly onto trailer during the loading process Requires 2 swivel brackets and 2 bolster brackets (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on trailer Does not include mounting hardware 3 Bolt holes allow for a strong connection to the bunk board Aluminum construction is sturdy and offers superior corrosion resistance Made in the USA Specs: Quantity: 1 swivel bracket Overall dimensions: 3-1/2" long x 1-1/2" wide x 2" tall Diameter of swivel mounting hole: 1/2" Diameter of flange mounting holes (each): 3/8" Spacing of mounting holes: Outer holes (center to center): 2-1/2" Inner holes (center to center): 1-1/4"
V-wing bolster bracket supports the bunks on your pontoon boattrailer. Short bracket wings and deep cradle are great for narrow pontoons. Galvanized steel material is ideal for saltwater use.Features: Heavy-duty bracket allows you to mount 2 bunk boards on your pontoon boattrailer Mounts on your boattrailer's frame or crossmember Stabilizes bunk boards when at least 2 brackets are used (other bracket sold separately) Short bracket wings surround and stabilize narrow pontoons Deep cradle keeps your boat's pontoons from jostling side-to-side Slotted mounting hole allows for easy adjustment along frame during installation 11-Gauge, galvanized steel construction is sturdy and corrosion resistant Mounting hardware sold separately Made in the USA Specs: Quantity: 1 bracket Application: 4" wide bunk boards Maximum length: 11-3/4" Base length: 8-1/2" Maximum height: 5-1/8" Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
Rub marks, squeaks, or crooked loading? A swivel bolster lets you pivot your bunk so it sits flush to your hull. You set the height, it spreads the boat's contact, and you'll load your boat smoother while protecting it's finish.Ready to Install: Includes mounting hardware for a straightforward setup. Features to know about Centered, Scuff-Free Loading When a boat loads crooked or rubs the same spot every trip, it's usually a bunk alignment issue, not the hull. Swivel bolster brackets let you adjust your bunk boards to where they should be, so the hull sits right and loading feels smooth.
... This swivel top angle replaces the pivoting head on your bolster bracket, letting your bunk sit flush to the hull. Pair it with an upright bracket to complete your setup.Fixed bunks can fight the boat and leave rub marks in the same spots. This compact swivel bracket lets you adjust your bunk boards so they sit flush to your hull.
If your bunkbrackets are rusted, bent, cracked, or no longer keeping your bunks aligned and tight, it's time for new ones. This will make sure your boat sits square, loads smoothly, and you're not risking hull damage or a failed support.Highlights Get Your Boat Hull to Sit Right: The 2-3/4" vertical slot lets you dial in bunk height so the boat centers on your trailer. Stop the Squeaks: Non-slip dimples and a 10" base spread the load and stop bunk creep, so boards do not dig in or squeak.
If your bunkbrackets are rusted, bent, cracked, or no longer keeping your bunks aligned and tight, it's time for new ones. This will make sure your boat sits square, loads smoothly, and you're not risking hull damage or a failed support.Highlights Get Your Boat Hull to Sit Right: The 2-3/4" vertical slot lets you dial in bunk height so the boat centers on your trailer. Stop the Squeaks: Non-slip dimples and a 12" base spread the load and stop bunk creep, so boards don't dig in or squeak.
Filters
