If your vehicle already has a 4-way flat, this kit includes everything you need to install an electric trailer brake controller and 7-way connector. If there's not an existing 4-way flat on your vehicle, you can purchase one separately.
Extend your factory harness to a new location or add a different style connector without having to remove your factory harness with this handy 3' extension.
Quickly and easily install a 7-way, RV-style trailer connector on your vehicle with this custom harness. Connector plugs directly into OEM tow package port - no cutting, splicing or tapping required.
The Replacement Spring Bar for Husky Center Line Weight Distribution System - Qty 1 #HT32330 will be compatible with your System Head, but since it is a higher weight rating, you will need the matching set of bars for the system to function…
Beginning with the introduction of the 2007 model year, GM stopped using the connector that was located in the convenience center under the dash for installing a brake controller. Instead, the tow package connection consists of 4 or 5 wires bundled…
The RM9333-1 brake pedal monitor fit the Roadmaster BrakePro RM9300 proportional braking system. As both of these have been discontinued by Roadmaster you would want to use their current Roadmaster Even Brake Portable Flat Tow Brake System #RM-9400…
Hey Jerry, great question! Yes, if you found another slide out that is rated for only 5,000 RPM then you'll be cutting the movement of the slide just about in half. The Lippert Venture Actuator and High Speed Slide-Out Motor #LC168956 that…
Hey Craig, Not quite sure which video you're referring to but I'm assuming you're trying to install a trailer brake controller? If this is the case then I wouldn't follow the video on the wire color and I would test each wire with a…
Hi Richard; do you have the 521448-5 or 521448-4? I see you ordered the #RM-521448-5HK. I had to go in and add the hardware kit for the 521448-4 which is the Replacement Hardware Kit for Roadmaster Baseplate 521448-4 #RM68BF.
Hey Ronald, it looks like you ordered the Curt hitch part #C15318 which is designed for the short bed trucks. Do you have a long bed? If so, the correct fit would be the part #C15300.
Hey Mike, Sometimes with those 7 and 4 way trailer connectors, if you are testing the 4 flat and 7 way and don't unplug, or remove the tester from the 4 way it will cause the 7 way plug to show as not working. Most adapters do not let the 2…
From what I could find it looks like your ADTH 1RV-200 motor has a weight capacity of 6,500 lbs. You can use a motor that is rated for a higher capacity, like our replacement motor #LC142178 for Ram landing gear which is rated at 8,000 lbs. Just keep…
What you need is a light kit specifically for flat-towing. The Plug-N-Tow TM Vehicle Wiring Harness, #42615, would be if the Jeep were towing a trailer and not for activating its lights while it is being towed. There are a few options for lighting…
Hey Pete, thanks for the picture and information. Since the Thetford 42070 is an Aqua-Magic Style II toilet, the Replacement Water Valve item #TH78SA will indeed fit it. This kit will replace the valve and the seals around it.
Although I have not heard of the CIPA Universal Fit Towing Mirror CIPA Universal Towing Mirrors part #CM11980-2 blowing off when attached properly I can say that the K-Source Universal Towing Mirrors part #KS3891-2 are a much more secure option. The…
Filters
