This aluminum tow bar is the absolutely snazziest tow bar you can get. Sleek, lightweight, with built-in LEDs for increased visibility and safe driving at night. The electrical cord comes installed in the cable guide, keeping your setup organized.These LEDs are more than bright enough for you to see what you're doing. It's all extra snazz with no extra work. When you plug the power cord into your RV's 7-way to flat tow, the LEDs will have power. Turn on your RV's taillights and the LEDs come on too.
The automotive-grade pads on these brakes offer lasting effectivenes. 12" x 2" Assemblies have rust-resistant, e-coated backing plates. Fits 14-1/2" to 16-1/2" wheels.For this job, grab a floor jack and either a brake adjustment tool (sold separately) or just a standard flathead screwdriver. Jack up your trailer enough to get the wheel(s) off the ground. Remove the adjuster plugs from the backing plate on the brake, and insert the flat end of the tool through the back of the assembly.
If your trailer sees off-road action, use a handbrake (not included) with these brakes to hold it steady when parking on uneven terrain. 12" x 2" Assemblies fit 14.5" to 16" wheels. Made in the USA.For this job, grab a floor jack and either a brake adjustment tool (sold separately) or just a standard flathead screwdriver. Jack up your trailer enough to get the wheel(s) off the ground. Remove the adjuster plugs from the backing plate on the brake, and insert the flat end of the tool through the back of the assembly.
Simple yet tough, this tow bar is engineered to be easy to hook up. The extra-long arms help you make tight turns. Stores conveniently on the back of your RV: push the arms up and the holding latch will automatically lock into place.For added protection from the elements, slip the Roadmaster tow bar cover (RM-055-3 - sold separately) over the Falcon 2 when you're not using it. What You Need to Flat Tow Flat towing can be a much more convenient way to take your car RVing with you than using a trailer or a tow dolly. It'll save you storage space both at home and at the campsite, and it takes less time and hassle to hook up.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Features: Provides a 4-way flattrailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Connects quickly and easily - no cutting or splicing of wires Locate connection point in rear cargo area Plug in connector Includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 3 amps per circuit Tail lights: 6 amps per circuit Limited 1-year warranty Installation This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the interior trim panel in your rear cargo area.
This aluminum tow bar is the absolutely snazziest tow bar you can get. Sleek, lightweight, with built-in LEDs for increased visibility and safe driving at night. The electrical cord comes installed in the cable guide, keeping your setup organized.These LEDs are more than bright enough for you to see what you're doing. It's all extra snazz with no extra work. When you plug the power cord into your RV's 7-way to flat tow, the LEDs will have power. Turn on your RV's taillights and the LEDs come on too.
Think of it as a one-time project that pays off on every trip. Once the Shadow 2 braking system is installed under the hood, you hook up, check your monitor, and drive away with the peace of mind that your towed vehicle is stopping safely behind you.If you're not a DIY-er, check out our Installer Locator to find an installer near you. What You Need to Flat Tow Flat towing can be a much more convenient way to take your car RVing with you than using a trailer or a tow dolly. It'll save you storage space both at home and at the campsite, and it takes less time and hassle to hook up.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. Connectors plug directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Features: Provides a 4-way flattrailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Connects quickly and easily - no cutting or splicing of wires Tow harness with 4-way connector plugs into connection point in rear cargo area Includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 5 amps per circuit Tail lights: 7.5 amps per circuit 1-Year limited warranty Installation This custom-fit T-connector plugs into your vehicle's wiring harness.
This versatile tow bar is easy to use, with arms that support their own weight while you hook up and swing to either side for storage. Integrated safety cables keep your setup streamlined and organized. Built-in rise/drop keeps tow bar level.What You Need to Flat Tow Flat towing can be a much more convenient way to take your car RVing with you than using a trailer or a tow dolly. It'll save you storage space both at home and at the campsite, and it takes less time and hassle to hook up.
This versatile tow bar is easy to use, with arms that support their own weight while you hook up and swing to either side for storage. Integrated safety cables keep your setup streamlined and organized. Built-in rise/drop keeps the tow bar level.What You Need to Flat Tow Flat towing can be a much more convenient way to take your car RVing with you than using a trailer or a tow dolly. It'll save you storage space both at home and at the campsite, and it takes less time and hassle to hook up.
Quickly and easily convert a 7-pole, RV-style connector to a 4-way, flat connector with this RV connector adapter. Adapter has a non-corrosive nylon shell.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly in OEM tow package port. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Features: Provides a 4-way flattrailer connector at the back of your vehicle to power your trailer's signal lights Designed for use with a factory tow package Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Connects quickly and easily Locate connection point in rear cargo area Plug in T-connector Includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 3 amps per circuit Tail lights: 6 amps per circuit Limited 1-year warranty Installation This custom-fit T-connector plugs into your vehicle's factory tow package, which is located in your cargo area, on the driver's side.
Whether you're replacing your trailer brakes or putting some on a new brake axle, these are easy to work with from start to stop. 12" x 2" Assemblies fit 14-1/2" to 16" wheels. 5-Bolt pattern backing plate. Made in the USA.For this job, grab a floor jack and either a brake adjustment tool (sold separately) or just a standard flathead screwdriver. Jack up your trailer enough to get the wheel(s) off the ground. Remove the adjuster plugs from the backing plate on the brake, and insert the flat end of the tool through the back of the assembly.
This versatile tow bar is easy to use, with arms that support their own weight while you hook up and swing to either side for storage. Integrated safety cables keep your setup streamlined and organized. Built-in rise/drop keeps the tow bar level.What You Need to Flat Tow Flat towing can be a much more convenient way to take your car RVing with you than using a trailer or a tow dolly. It'll save you storage space both at home and at the campsite, and it takes less time and hassle to hook up.
With stainless steel arms, this coupler-style tow bar extends smoothly to reach your ball mount. Mounts to the base plate with quick-disconnects and stores on the front of your vehicle while you drive around town.Inside each arm, a built-in safety strap provides extra peace of mind by ensuring that the inner and outer arms won't separate in the event of a latch failure. What You Need to Flat Tow Flat towing can be a much more convenient way to take your car RVing with you than using a trailer or a tow dolly. It'll save you storage space both at home and at the campsite, and it takes less time and hassle to hook up.
Parking your trailer in a tight space doesn't have to be stressful. This wireless electric dolly gives you full control and visibility, so you can walk around and guide it into place at home, in storage, or on the job.This unit works with standard electric and surge brake systems, giving you consistent stopping power across a wide range of trailers. Electric-over-hydraulic systems require a custom brake plug, which is not included. Plug in the 7-way cord and your trailer's brakes and tail lights activate automatically, giving you added control and visibility as you move.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Features: Provides a 4-way flattrailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Connects quickly and easily Locate connection points behind tail lights Plug in T-connector Run hot lead to car battery Includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 3 amps per circuit Tail lights: 6 amps per circuit Limited 1-year warranty Installation This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights.
Convert your vehicle's 4-way to a 7-way with this wiring adapter. Flat, 4-pole connector plugs into your vehicle and additional wire leads pull 12V power for accessories and send signals for the electric brakes and auxiliary or reverse.Features: Adapter converts the 4-way flattrailer connector on your vehicle to a 7-way RV-style connector 4-Way flattrailer end plugs into the 4-way flat on your vehicle 7-Way RV-style connector plugs into the 7-way on your trailer Additional wire leads for 12V power, electric brake function, and auxiliary or reverse function Blue wire connects to your brake controller to send braking signal to your trailer's electric brakes Black wire pulls 12V power from your vehicle's battery to help maintain the trailer battery or power accessories Yellow wire sends the signal to your trailer to activate the reverse light or an auxiliary circuit Spring-loaded dust cover protects the 6-way connector from moisture and debris Specs: Harness length: 12" Wiring configuration: Green (4-way): passenger side brakes/turn signal Yellow (4-way): driver side brakes/turn signal Brown (4-way): tail lights Blue: electric brakes Black: battery Yellow: 12V power supply or auxiliary White: ground 1-Year warranty
Great for cars and trailers with either LED or incandescent bulbs, this kit converts your vehicle's lighting system to match your trailer's. It includes a 4-way flat, wire taps, and a power wire that pulls power directly from your battery.Features: Provides a 4-way flattrailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately) Ensures that your vehicle's wiring matches that of your trailer Avoids overloading your vehicle's electrical system by connecting directly to your battery Power wire and fuse kit included Designed with safety in mind Guards against electrical shorts, mis-wire situations, and electrostatic discharge Splices into your vehicle's wiring with the included quick-splice connectors Color-coded wires ease installation Resists damage from shock and vibration for superior operation on rough roads Circuit board is constructed using surface-mount technology (SMT), an improvement over through-hole construction Includes durable, molded-rubber, female output socket with protective dust cover Specs: Application: Vehicles with 2-wire or 3-wire electrical systems Trailers and vehicles with LED or incandescent lights 4-Way harness length: 58" Splice-in wire length: 17" Ground wire length: 17" Power wire length: 20' Maximum amperage: Turn lights and brake lights: 3 amps per circuit Tail lights: 3 amps per circuit Wire gauge: Power wire: 12 Limited 1-year warranty Do I Need A Tail Light Converter?
This versatile tow bar is easy to use, with arms that support their own weight while you hook up and swing to either side for storage. Integrated safety cables keep your setup streamlined and organized. Built-in rise/drop keeps tow bar level.What You Need to Flat Tow Flat towing can be a much more convenient way to take your car RVing with you than using a trailer or a tow dolly. It'll save you storage space both at home and at the campsite, and it takes less time and hassle to hook up.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Features: Provides a 4-way flattrailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Connects quickly and easily Locate connection points in rear cargo area Plug in T-connector Run hot lead to car battery Includes a powered tail light converter that connects directly to your battery to avoid overloading your vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 3.0 amps per circuit Tail lights: 6.0 amps per circuit Limited 1-year warranty Installation This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Features: Provides a 4-way flattrailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Connects quickly and easily Locate connection points behind tail lights Plug in T-connector Run hot lead to car battery Includes powered tail light converter that connects directly to battery to avoid overloading vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 3.0 amps per circuit Tail lights: 6.0 amps per circuit Limited 1-year warranty Installation This custom-fit T-connector plugs into your vehicle's wiring harness, which is located in your rear cargo area, behind the driver's-side and passenger's-side tail lights.
Free-backing hydraulic drum brakes won't lock up when you back up, even if your actuator is engaged. 12" x 2" Assemblies have e-coated backing plates. Fit most 14-1/2" to 16-1/2" wheels.For this job, grab a floor jack and either a brake adjustment tool (sold separately) or just a standard flathead screwdriver. Jack up your trailer enough to get the wheel(s) off the ground. Remove the adjuster plugs from the backing plate on the brake, and insert the flat end of the tool through the back of the assembly.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Features: Provides a 4-way flattrailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Connects quickly and easily Locate connection points in rear cargo area Plug in T-connector Includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 3 amps per circuit Tail lights: 6 amps per circuit Limited 1-year warranty Installation This custom-fit T-connector plugs into your vehicle's wiring harness, which is located in your rear cargo area.
Filters
