Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
It sounds like you need to convert the separate wiring of your 1991 Nissan truck to a combined setup to work with the Round LED Taillight #STL42RB. For this you will need to get a Roadmaster Brite-Lite Wiring Converter #RM-732. You will run the wires…
view full answer...We do have a few different tire chains to fit the 37x12.50R17 tires on your 2014 Jeep Wrangler Unlimited. Out of our linked selection I recommend using one of the following: - Titan Chain Snow Tire Chains - Twist Link #TC3235 - Titan Chain Snow Tire…
view full answer...If we go by the max pivot length chart, see picture, at 3,100 pounds the tongue weight maximum would be 310 pounds (since in the chart the max tongue load is 10 percent of the gross trailer weight). If your tongue weight is 180 pounds now then it…
view full answer...The only other extension option we carry besides the Torklift SuperTruss extender that does not cut your tongue weight in half is an extra long ball mount. Traditional extensions such as part #C45796 cut the tongue weight capacity of the hitch on the…
view full answer...Personally I prefer the B&W Companion OEM 5th Wheel Hitch #BWRVK3305 over the Curt PowerRide 5th Wheel Trailer Hitch #C48BR. With that said the Curt is rated for 30,000lbs while the B&W is only rated up to 25,000lbs so if you need to tow a…
view full answer...With a 2022 F350 short bed, hitting the top of the bed rails should not be an issue with most campers. Turning clearance however, will certainly be a factor. That is one advantage of the Andersen Ultimate hitch #AM3200, as it provides a 9"…
view full answer...Based on my research your Dexter 8-245 hub is a 3,500 lb hub that and the correct replacement inner bearing is part #L68149 with the matching race being part #L68111. The correct replacement outer bearing is part #L44649 and the matching race is part…
view full answer...The part number 8-245 is an obsolete part number but I was able to find some info on it. It was basically a 3,500 lb hub and drum that fit a 84 spindle. Because of that we have a solution that will fit. The part #AKHD-545-35-K is a 3,500 lb hub/drum…
view full answer...I wasn't able to get exact info on your part number, but from the part number we know it's right hand thread wheel bolt like the part #RG02-020 which is a fine thread 1/2 inch diameter bolt with a 60 degree angled head. The other most likely…
view full answer...What you are describing can happen on vehicles when LED lights are installed but there is an easy fix. The problem is that the low power draw of LED lights can make the vehicle computer think that there is a bulb out because there isn't enough…
view full answer...Thanks for your purchase of the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter for Recessed Ball #DM8550046! To determine the correct height setting for this hitch (11-1/2", 12-3/4", or 14") you need to measure from the…
view full answer...It sure would. The Pigtail of the #HM47210 unplugs from the pigtail, and the #41157 would plug inline between the pigtail and the 7-way connector as shown in the photo I've edited for you. If you click the provided link, you can see the #41157…
view full answer...