To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Mount this 7-way, RV-style connector in your truck bed to simplify hookup of your 5th-wheel or gooseneck trailer. Harness plugs into existing wiring and retains use of factory 7-pole at the bumper. 90-Degree-angled connector fits into tight spaces.
Features:
Specs:
This T-connector wiring harness uses your factory tow package to add a 7-way socket in your truck bed while also retaining the use of the 7-way at your vehicle's bumper. The harness plugs into the back of your 7-way at the bumper and also into your factory wiring. And it provides 10 feet of cord to run the second 7-way connector to your truck bed. Installing a second 7-way connector in your truck bed makes it easy to connect the 7-way plug from your fifth-wheel or gooseneck trailer.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to take a look at the Hopkins Endurance fifth wheel and gooseneck 90 degree wiring harness with the seven way plug. Now this is a custom fit part. It is designed to fit the 1997 to 2004 Ford F-150 and the F-250 light duty trucks with the factory seven way, and on any custom fit part I always like to recommend for you to go to our website, use our fit guide, put in your year and model vehicle, and it'll show if this will work for your application. Now this harness will provide the seven way blade style connector in your truck bed for a hassle free hook up of your fifth wheel or gooseneck trailers. The connector head on the harness is designed, as you can see, with a 90 degree angle, so it'll fit into tight spaces in your truck bed side rails. On the seven way connector, the lid on it is a nice durable lid with an oversized hinge, opens 180 degrees for an easy connection.When you do install this harness, it will allow you to retain the use of the factory seven way connector at the rear of your truck.
This does install very quickly and easily. There's no cutting or splicing required. Basically what you'll do is take this T-connector portion, plug this into the factory wiring harness, and also into the vehicle's factory installed seven way connector at the back of your truck. Then you'll have a ground wire here with an islet on it. That you want to connect to a good clean ground.
Then you run this 10 foot long wiring harness from the bumper all the way up to the truck bed, take it up to the side, and you'll have this installed in your truck bed. All you have to do is just line it up and plug it right in, and then your seven way will be all ready to go.If you notice also, on the seven way they do have enhanced weather proofing. It has this internal seal right up here so when the lid closes, it'll protect those terminals from any damage or any elements. The terminals are corrosion resistant, and they do use a rubber coated copper wiring. The seven way itself is constructed of extremely durable ABS plastic, and it does require a two and one-eighths inch diameter hole to be drilled in your truck bed for this to install in.
That does include everything shown here. The harness, the seven way, and includes the four self tapping screws to install this into your truck bed, some nylon ties to take up any slack in the wiring, nice set of detailed instructions and even a couple packets of dielectric grease or terminal grease. That grease you want to use anytime you plug in any connectors. You put some grease on it before you plug them together. Neck grease will help protect it for any rust or corrosion.
Again, the specs on this, the harness length is 10 feet. The wire gauge is in this harness. The purple, green, yellow and brown wires are 16 gauge, and the blue, red and white wires are 12-gauge.That should do it for the review on the Hopkins Endurance fifth wheel and gooseneck 90 degree wiring harness, with the seven way plug.
Average Customer Rating: 4.3 out of 5 stars (3 Customer Reviews)
Mount this 7-way, RV-style connector in your truck bed to simplify hookup of your 5th-wheel or gooseneck trailer. Harness plugs into existing wiring and retains use of factory 7-pole at the bumper. 90-Degree-angled connector fits into tight spaces.Thanks, the harness worked great. It was easy to connect to my vehicle. The shipping was supper fast.
Looks nice in the package but the search tool told me this would fit my truck and it doesn't. Etrailer was helpful in getting a return label to me and finding the correct harness. Only thing that would have been nice if they would have waved the shipping on the new one for the hassle of there webpage mistake. That's the only reason I'm not giving more starts.
The item I received had great packaging received on time wonderful product and the price was great I will order again
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.