bing tracking image

Pollak Custom Fit Vehicle Wiring - Fifth Wheel and Gooseneck Wiring - PK11932 Review

content loading

Customers compare PK11932 to these similar products

Products Featured in this Video

Review of Pollak Custom Fit Vehicle Wiring PK11932

Today we're going to review part number PK11932. This is the Pollak 5th Wheel and Gooseneck Trailer Connector Wiring Harness with the T-Connector. Now this T-connector will plug into your OEM wiring harness underneath your vehicle. Helps provide a second 7-way connector in the bed of your truck. It's great for trucks that are pulling 5th wheels or gooesnecks that you can have a 7-way right in the truck bed. The wiring harness length on this is about 8' and again it is designed to plug into the OEM harness underneath the truck.

No splicing is required. Basically what you would do is find the plug where the OEM harness ends, pull that plug out, connect this into that, it'll match up and plug in. Then this would go to the 7-way at the back of the vehicle. Now if you don't have a 7-way and you need to install one, this would work great with the Pollak 7-Way Connector we do sell separately on our website. It's part number PK11893.

It is listed on this product page as a related product. Then once those are both connected, what you'll do is run this 8' length of wire up to the truck bed. You'll need to drill a hole in the side if your truck bed if you want to install it into the truck bed, and then just run this wire through there. Then once this is run through, you'll make your connection to this connector for a 7-way to connect to that. Now the application on this harness is it will fit Chevy, GMC and Ford trucks. It will also work on Dodge and Chrysler trucks when used with the Dodge Chrysler OEM plug adapter, and that's part number PK11933.

That's also sold on our website and listed as a related product. Once this is run up to the truck bed, what you'll do is if you go to the product page on this part number, you'll see there's a wiring diagram picture and it will show you the back of this socket right here. It shows the numbers on it and actually if you look real close, they are numbered 1, 2, 3, 4, 5, 6, and in the middle is 7. If you look at that wiring diagram picture on the product page, it'll show you which color wires, you'll see the colored wires here, will go into which number hole. For instance, if you look at the middle hole it's number 7. If you look on the wiring diagram it'll say yellow wire, which is the reverse circuit.

You just find your yellow wire and what you'll do is push that into the 7 hole, which is the middle socket once we get that lined up. You can see once you push it all the way in it'll click and lock into place, and you'll do that with all the wires using the wiring diagram. Then once you get all the wires pushed in, all you do is take this locking ring, line it up over, and then push it down and it'll lock all those wires in to keep them from coming out. Now by chance if you happen to put a wire in and just found out, "Uh oh that's the wrong color in the wrong hole, what do I do now" It's very simple, just take a very small screwdriver, and right where the clip goes in there's a little tab that if you just push on that tab, it'll unlock it and the wire will pop right out. It's very easy to do, so no worry if you get a wrong wire in the wrong hole, you just remove it and put it in the right one. That should do it for the review on part number PK11932. This is the Pollak 5th Wheel and Gooseneck Trailer Connector Wiring Harness with the T-Connector. .

Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Joshua S
Video Edited:
Joshua S
Employee Chris R
Video Edited:
Chris R
Employee Nicholas E
Test Fit:
Nicholas E

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.