3-1/8" x 2" Rectangle. LED trailer light serves as either a side marker light or a clearance light. Built-in reflex reflector. Pirhana series combines modern design with vibrant lighting. Stud mount. 2-Wire design. P2 rated.Features: LED trailer light functions as a clearance or side marker light when properly mounted Piranha series combines modern design with vibrant lighting for a unique look Built-in reflex reflector removes the need for a separate reflector Durable SMD construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution and thinner construction LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Amber lens over white LEDs Compatible with 12V DC systems Stud mount to trailer with included stud Can also be surface mounted with 2 screws - hardware sold separately 2-Wire design includes power lead and ground wire DOT compliant P2 rated Specs: Dimensions: 3-1/8" long x 2" tall x 15/16" deep Diodes: 2 Power draw at 12V: 0.04 amps Input voltage: 9V - 16V DC 10-Year limited warranty Manufacturer Cross Reference Light will work as an exact replacement for: Grote # 47853-5 Optronics # MCL36AS P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
Kit includes 14-1/4" long equalizers and bolts and shackles for suspending your leaf springs from your trailer frame. Use with HAP-103-00 for a complete tandem-axle kit. Designed for use with 10,000-lb to 15,000-lb, heavy-duty Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location (when used with HAP-103-00) Includes: (2) 4-1/8" Tall center hangers with 1-1/8" bolt holes (29-43-2) (1) 14-1/4" Long, left-hand equalizer (13-107-7LH) Allows for 38" between axles (1) 14-1/4" Long, right-hand equalizer (13-107-8RH) Allows for 38" between axles (2) 4-1/2" Long x 1/2" diameter spring keeper bolts (7-95) (2) 1/2" Diameter locknuts (6-46) (2) 5-1/2" Long x 1" diameter spring-eye bolts (7-169) (2) 1" Diameter locknuts (6-112) (2) 6" Long x 1-1/8" diameter equalizer bolts (7-170) (2) 1-1/8" Diameter locknuts (6-72) Use in conjunction with HAP-103-00 for complete kit HAP-103-00 includes front and rear hangers and mounting hardware Designed for use on trailers with tandem, 10,000-lb to 15,000-lb, heavy-duty Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 10,000 lbs - 15,000 lbs 33" 38" 32-2/5" 5-1/2"
Leaf-spring mounting kit includes 6-1/4" tall front hangers, 6-1/2" tall center hangers, 7-11/16" tall rear hangers and hardware. Equalizers are 14-1/4" long. Designed for use with 10,000-lb to 15,000-lb, heavy-duty Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 6-1/4" Tall front hangers with 1" bolt holes (28-67-4) (2) 4-1/8" Tall center hangers with 1-1/8" bolt holes (29-43-2) (2) 7-11/16" Tall rear hangers with 1/2" bolt holes (30-66-1) (1) 14-1/4" Long, left-hand equalizer (13-107-7LH) Allows for 38" between axles (1) 14-1/4" Long, right-hand equalizer (13-107-8RH) Allows for 38" between axles (4) 4-1/2" Long x 1/2" diameter spring keeper bolts (7-95) (4) 1/2" Diameter locknuts (6-46) (4) 5-1/2" Long x 1" diameter spring-eye bolts (7-169) (4) 1" Diameter locknuts (6-112) (2) 6" Long x 1-1/8" diameter equalizer bolts (7-170) (2) 1-1/8" Diameter locknuts (6-72) Designed for use on trailers with tandem, 10,000-lb to 15,000-lb, heavy-duty Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 10,000 lbs - 15,000 lbs 33" 38" 32-2/5" 5-1/2"
Kit includes 18-3/8" long equalizers and bolts and shackles for suspending your leaf springs from your trailer frame. Use with HAP-103-00 for a complete tandem-axle kit. Designed for use with 10,000-lb to 15,000-lb, heavy-duty Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location (when used with HAP-103-00) Includes: (2) 4-1/8" Tall center hangers with 1-1/8" bolt holes (29-43-2) (1) 18-3/8" Long, left-hand equalizer (13-108-3LH) Allows for 42-1/4" between axles (1) 18-3/8" Long, right-hand equalizer (13-108-4RH) Allows for 42-1/4" between axles (2) 4-1/2" Long x 1/2" diameter spring keeper bolts (7-95) (2) 1/2" Diameter locknuts (6-46) (2) 5-1/2" Long x 1" diameter spring-eye bolts (7-169) (2) 1" Diameter locknuts (6-112) (2) 6" Long x 1-1/8" diameter equalizer bolts (7-170) (2) 1-1/8" Diameter locknuts (6-72) Use in conjunction with HAP-103-00 for complete kit HAP-103-00 includes front and rear hangers and mounting hardware Designed for use on trailers with tandem, 10,000-lb to 15,000-lb, heavy-duty Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 10,000 lbs - 15,000 lbs 35-1/10" 42-1/4" 34-2/3" 5-1/2"
Kit includes 24-3/4" long equalizers and bolts and shackles for suspending your leaf springs from your trailer frame. Use with HAP-103-00 for a complete tandem-axle kit. Designed for use with 10,000-lb to 15,000-lb, heavy-duty Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location (when used with HAP-103-00) Includes: (2) 4-1/8" Tall center hangers with 1-1/8" bolt holes (29-43-2) (1) 24-3/4" Long, left-hand equalizer (13-109-3LH) Allows for 48-1/2" between axles (1) 24-3/4" Long, right-hand equalizer (13-109-4RH) Allows for 48-1/2" between axles (2) 4-1/2" Long x 1/2" diameter spring keeper bolts (7-95) (2) 1/2" Diameter locknuts (6-46) (2) 5-1/2" Long x 1" diameter spring-eye bolts (7-169) (2) 1" Diameter locknuts (6-112) (2) 6" Long x 1-1/8" diameter equalizer bolts (7-170) (2) 1-1/8" Diameter locknuts (6-72) Use in conjunction with HAP-103-00 for complete kit HAP-103-00 includes front and rear hangers and mounting hardware Designed for use on trailers with tandem, 10,000-lb to 15,000-lb, heavy-duty Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 10,000 lbs - 15,000 lbs 38-1/3" 48-1/2" 37-7/10" 5-1/2"
Leaf-spring mounting kit includes 6-1/4" tall front hangers, 6-1/2" tall center hangers, 7-11/16" tall rear hangers and hardware. Equalizers are 24-3/4" long. Designed for use with 10,000-lb to 15,000-lb, heavy-duty Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 6-1/4" Tall front hangers with 1" bolt holes (28-67-4) (2) 4-1/8" Tall center hangers with 1-1/8" bolt holes (29-43-2) (2) 7-11/16" Tall rear hangers with 1/2" bolt holes (30-66-1) (1) 24-3/4" Long, left-hand equalizer (13-109-3LH) Allows for 48-1/2" between axles (1) 24-3/4" Long, right-hand equalizer (13-109-4RH) Allows for 48-1/2" between axles (4) 4-1/2" Long x 1/2" diameter spring keeper bolts (7-95) (4) 1/2" Diameter locknuts (6-46) (4) 5-1/2" Long x 1" diameter spring-eye bolts (7-169) (4) 1" Diameter locknuts (6-112) (2) 6" Long x 1-1/8" diameter equalizer bolts (7-170) (2) 1-1/8" Diameter locknuts (6-72) Designed for use on trailers with tandem, 10,000-lb to 15,000-lb, heavy-duty Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 10,000 lbs - 15,000 lbs 38-1/3" 48-1/2" 37-7/10" 5-1/2"
Leaf-spring mounting kit includes 6-1/4" tall front hangers, 6-1/2" tall center hangers, 7-11/16" tall rear hangers and hardware. Equalizers are 18-3/8" long. Designed for use with 10,000-lb to 15,000-lb, heavy-duty Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 6-1/4" Tall front hangers with 1" bolt holes (28-67-4) (2) 4-1/8" Tall center hangers with 1-1/8" bolt holes (29-43-2) (2) 7-11/16" Tall rear hangers with 1/2" bolt holes (30-66-1) (1) 18-3/8" Long, left-hand equalizer (13-108-3LH) Allows for 42-1/4" between axles (1) 18-3/8" Long, right-hand equalizer (13-108-4RH) Allows for 42-1/4" between axles (4) 4-1/2" Long x 1/2" diameter spring keeper bolts (7-95) (4) 1/2" Diameter locknuts (6-46) (4) 5-1/2" Long x 1" diameter spring-eye bolts (7-169) (4) 1" Diameter locknuts (6-112) (2) 6" Long x 1-1/8" diameter equalizer bolts (7-170) (2) 1-1/8" Diameter locknuts (6-72) Designed for use on trailers with tandem, 10,000-lb to 15,000-lb, heavy-duty Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 10,000 lbs - 15,000 lbs 35-1/10" 42-1/4" 34-2/3" 5-1/2"
Round trailer axle beam measures 60" from hub-face-to-hub-face and 48" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 8" to 14" wheels.If D = 2-5/8", then the bolt pattern is 5 on 4-1/2" If D = 2-3/4", then the bolt pattern is 5 on 4-3/4" If D = 3", then the bolt pattern is 5 on 5" If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
3-1/8" x 2" Rectangle. LED trailer light serves as either a side marker light or a clearance light. Built-in reflex reflector. Stud mount. 2-Wire design. P2 rated.
1-1/8" Diameter spring-retainer bolt attaches slipper spring to front hanger or equalizer. Locknut sold separately.Features: Suspension bolt attaches leaf spring to front hanger or equalizer Works with 10,000-lb, 12,000-lb, or 15,000-lb Dexter axle equalizers Locknut (6-72 - sold separately) secures in place on bolt Specs: Diameter: 1-1/8" Threads per inch: 7 Length: 6" Grade: 5
On the job or on the road, this 6-inch grommet light handles warnings and signals in one slim package. IP68 sealed, sonically welded, and plug-and-play with an AMP plug, it keeps you compliant and visible in any weather.Features: Diffused strobe or DOT lamp in a 6" oval form factor Grommet-mount design with dual AMP connector Meets or exceeds FMVSS 108; Amber strobe meets SAE J595 IP68 rated for dust and water incursion Sonically welded housing for a 100% sealed light Comes with lifetime warranty Wire colors: White - Ground, Red - High/Turn, Black - Low/Dim Specs: Dimensions (grommet mount): 6-1/2" L x 2-1/4" W x 1-1/2" D LED count: 32 Voltage: 9-14 VDC Current - Amber strobe's reverse: 0.575 A (± 0.085 A) Current - Amber strobe: 0.280 A Current - Stop/Turn: 0.170 A (± 0.030 A) Current - Tail: 0.075 A (± 0.012 A) Current - Reverse: 0.575 A (± 0.085 A) Plug: Dual AMP Mounting: Grommet LED color: Amber Lens color: Clear only This all new light from TecNiq combines all the features of a traditional stop, tail, turn, and reverse lamp, with the new styling of a diffused top and bottom lensing.
Unicream powder coated, 14" steel trailer wheel features a 4 on 5-1/2 bolt pattern and meets Department of Transportation standards.Specs Dimensions and Capacity: Rim dimensions: 14" diameter x 5-1/2" wide Offset: +0.5" Capacity: 1,865 lbs Bolt Pattern and Fitment: Bolt pattern: 5 on 4-1/2" Wheel bolt size: 1/2"-20 Pilot diameter: 2.62" Warranty: Limited 2-year
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 10" diameter x 2-1/4" wide Works with 10" brake assembly Bolt pattern: 5 on 5" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.99" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Hub is designed for use on trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub assembly fits idler axles Bearings, races, seal, grease cap, and lug nuts are included Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint finish Pre-greased idler hub is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated QAI and CSA certified Specs: Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles Compatible with standard axles from most manufacturers, including AxleTek, Dexter, Lippert (LCI), and AL-KO Wheel size: 14" to 15" Bolt pattern: 5 on 5" Wheel stud dimensions: 1/2" diameter x 1-5/16" long Grease cap flange diameter: 1.99" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" E-Z Lube and Easy Grease-Compatible Assembly for Simple Lubrication The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy.
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter EZ-Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 10" diameter x 2-1/4" wide Works with 10" brake assembly Bolt pattern: 5 on 5-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.99" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Hub is designed for use on trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub assembly fits idler axles Bearings, races, seal, grease cap, and lug nuts are included Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint finish Pre-greased idler hub is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated QAI and CSA certified Specs: Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Wheel size: 13" to 15" Bolt pattern: 5 on 5-1/2" Wheel stud dimensions: 1/2" diameter x 1-5/16" long Grease cap flange diameter: 1.99" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" E-Z Lube and Easy Grease-Compatible Hub for Simple Lubrication The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy.
Hard stops and heavy loads reveal worn hubs. This ABS-ready Lippert hub and drum comes prepacked with bearings, races, seal, and wheel bolts, saving you time on install and restoring smooth braking and steadier towing you can count on.Specs: Application & Capacity Axle rating: 3,500 lbs Spindle compatibility: #84 EZ Lube and Easy Grease Brake type: compatible with electric ABS brakes Drum size: 10" diameter x 2-1/2" wide Wheel size: 13" to 15" Weight capacity per hub: 1,750 lbs Quantity: 1 assembly Color: black Bolt Pattern Pattern: 5 on 4-1/2" Wheel bolt diameter: 1/2" x 1-1/4" If you need help figuring out your bolt pattern, just scroll down for directions Included Components Bearing: L68149 I.D: 1.378" Bearing: L44649 I.D: 1.063" Oil seal: 10-19 Bearing races: included and pre-installed Material Type Hub and drum: iron Warranty: 1-year on materials or workmanship defects
... Tow up to 7,500 lbs with the 2" ball or 18,000 lbs with the 2-5/16" ball.The B&W Tow & Stow adjustable ball mount lets you tow a variety of trailers with different tongue heights. Having both a 2" ball and a 2-5/16" ball allows for even more versatility, making this the ultimate go-to ball mount if you own multiple trailers. Easily Adjusts and Stows To switch the hitch ball, simply remove the pin holding the balls in place and rotate the entire block that the balls are mounted on until the ball you want to use is on top.
Need to replace a worn wheel end and get back on the road? This complete brake hub kit comes with pre-greased and installed bearings, races, and seal, plus everything else needed to complete the install so you can get rolling again.Fit Check Before Install: Fits 3,500-lb axles, 13" to 15" wheels, 10" brake drums, and 5 on 5" bolt patterns. Bearing and Seal Match: Includes L68149 inner bearing, L44649 outer bearing, L68111 inner race, L44610 outer race, and a seal with 1.719" I.D.
Ball mount with built-in hitch balls lets you hook up your trailer to your tow vehicle. Stow the ball and mounting platform on this dual-ball ball mount beneath your hitch for a sleek look when you are done towing. Works with GM MultiPro tailgates.Features: Ball mount with built-in hitch balls lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver Ball provides connection point for trailer coupler Engineered to work with all GM MultiPro tailgates Stowable design lets you store ball and mounting platform underneath your vehicle Remove pins holding ball mount platform in place on shank Flip platform underneath the hitch Reinsert pins and clips to secure ball mount platform for travel Adjustable height lets you tow trailers of different heights with the same vehicle Slide ball mount up or down along shank and secure in place with included pins and clips 2 Different-size hitch balls let you tow trailers with different coupler sizes To switch ball, simply remove pin, rotate balls, and reinsert pin Dual-process chrome plating on balls provides excellent rust resistance Black powder coated shank is corrosion resistant Stainless steel pins create sturdy, rust-resistant connections Durable steel construction with high yield tubing offers superior strength Hitch pin and clip or hitch lock sold separately Made in the USA Specs: Application: 2" x 2" trailer hitch receivers Gross towing weight: When used with 2" ball: 7,500 lbs When used with 2-5/16" ball: 10,000 lbs Maximum drop: 4-1/2" Maximum rise: 5-1/2" Incremental height adjustment: 1" Limited lifetime warranty Note: To avoid the Tow & Stow hitting steep driveways or curbs, we recommend at least 11" of clearance between the ground and the lowest point of the drop hitch, as seen above.
This 15" x 5" steel trailer wheel has a 5 on 5 bolt pattern and a 3.19" pilot diameter. Improved torque retention keeps wheel secure when mounted on your axle. ... Features: Steel wheel with modular design is sturdy and rust resistant Black acrylic enamel finish resists chipping and other damage better than powder coat finishes Finish is applied after a zinc phosphate pre-treatment and covers an e-coat primer layer Excellent corrosion resistance with a salt spray rating of more than 1,000 hours Beveled stud holes help to keep wheel securely in place on trailer hub Eliminate the need for constant retightening of lug nuts Valve stem is included Wheel meets SAE J1204 standards Specs: Rim dimensions: 15" diameter x 5" wide Bolt pattern: 5 on 5" Wheel bolt size: 1/2"-20 Capacity: 2,160 lbs Pilot diameter: 3.19" Offset: 0 2-Year limited warranty Durable Acrylic Enamel Finish This wheel has a durable acrylic enamel finish on the front.
... Tow up to 7,500 lbs with the 2" ball or 18,000 lbs with the 2-5/16" ball.The B&W Tow & Stow adjustable ball mount lets you tow a variety of trailers with different tongue heights. Having both a 2" ball and a 2-5/16" ball allows for even more versatility, making this the ultimate go-to ball mount if you own multiple trailers. Easily Adjusts and Stows To switch the hitch ball, simply remove the pin holding the balls in place and rotate the entire block that the balls are mounted on until the ball you want to use is on top.
White powder coated, 15" steel wheel features a 5 on 5 bolt pattern and meets Department of Transportation standards.Features: Sturdy steel construction White powder coat finish E-coat primer beneath powder coat resists rust 8-Spoke pattern High-quality wheel meets DOT specifications Made in the USA Specs: Rim dimensions: 15" diameter x 5" wide Bolt pattern: 5 on 5" Wheel bolt size: 1/2"-20 Pilot diameter: 3.19" Capacity: 2,150 lbs Limited 2-year warranty
... Tow up to 3,500 lbs with the 1-7/8" ball, 7,500 lbs with the 2" ball, or 14,500 lbs with the 2-5/16" ball.The B&W Tow & Stow adjustable ball mount lets you tow a variety of trailers with different tongue heights. Having a 1-7/8" ball, a 2" ball and a 2-5/16" ball allows for even more versatility, making this the ultimate go-to ball mount if you own multiple trailers. Easily Adjusts and Stows To switch the hitch ball, simply remove the pin holding the balls in place and rotate the entire block that the balls are mounted on until the ball you want to use is on top.
Filters
