4 wire jacketed cable  x  >  

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look. service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer

• etrailer

Replaces the fabric for your Solera 13'1" wide RV slide-out awning (LCV000168109). Black color.

• Lippert

Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

• CURT

Minimize sway and driver fatigue by improving the stability and driveability of your vehicle. The bar on this sturdy, effective anti-sway system mounts to the rear axle and to the frame to balance weight transfer and reduce body roll.

• Roadmaster

Get the signal lights needed for towing without tapping into your towed car's electrical system. Bright LEDs mount inside your vehicle's tail light housings, and wiring runs beneath your car for a seamless appearance. 450 Lumens per bulb.Features: Tail light kit gives you brake, running and turn signal lights for your towed vehicle without tapping into its wiring Bypasses towed car's electrical system completely - wiring

• Roadmaster

Replace the existing 7-way on your vehicle with this socket. Built-in magnet creates tight connection with EZ Connector trailer-end plug (sold separately). Face-to-face contacts mean no bent or broken terminals. O-ring on lid makes a watertight seal.Features: 7-Way trailer connector installs at the back of your vehicle to power your trailer's signal lights Designed for use with an existing factory tow package Compatible with 4-pin, 5-pin

• EZ Connector

Designed for use on your open, flatbed trailer, this all-inclusive rack features holders for your trimmers; backpack blower; spool of trimmer line; and 3- to 5-gallon, round cooler or pesticide sprayer. Three keyed-alike padlocks included.

• PackEm

This roof vent has a single-speed fan that circulates air, and it opens quickly and easily with the spring-loaded handle. The handle locks the translucent white, wedge-shaped dome into 10 different positions. Install kit and garnish sold separately. Black wire is power White wire and green wire are ground Interior trim piece (or garnish) and installation kit sold separately 4 Mounting points on flange allow for installation of a vent cover (sold

• Ventline

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look. and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

• etrailer

This slide-out awning shields the top of your RV slide-out from debris. It prevents water from pooling and mold from forming. The awning extends and retracts with your slide-out. Awning fits boxes that extend up to 48". Awning rail is included.

• Lippert

Trailer adapter converts a tow vehicle's 7-pole wiring connection to a 5-pole flat pin connection for towing trailers with hydraulic brakes. Coiled cord stretches and contracts for extra flexibility. Threaded bracket ensures a secure connection. Specs: Stretched length of cable from plug to plug: 94-1/2" 5-way flat plug to coil: 17" 7-way round plug to coil: 7" Length of coiled cable section unstretched: 8" Coiled cable

• Optronics

Quickly and easily install this custom harness to get a 7-way and a 4-way trailer connector on your vehicle. Connector plugs into OEM tow package wiring harness - no cutting or splicing required. Weathertight seal deters damage from water and debris.Features: Provides both a 7-way RV-style and a 4-pole flat connector at the back of your vehicle to power your trailer's signal lights Designed for use with a factory tow package Compatible

• Reese

This roof vent uses a 120V fan to circulate air in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes with a hand-operated crank.: Included garnish fits roofs 2-1/8" to 3-1/4" thick Garnish leg length (depth): 2-1/8" Garnish color: Polar White Other garnish sizes are available (sold separately) Fan power: 120-volt AC

• Ventline

This universal wiring kit lets you install an electric brake controller (sold separately) in your vehicle and a 7-way connector for your trailer lights at the same time. Plugs into the existing 4-way on your vehicle.) 3/8" Ring terminals 4 Butt connectors for joining wires (8) 8-1/2" Long cable ties let you secure loose wires Limited 1-year warranty Notes: No existing 4-pole connector: If your vehicle does

• CURT

This roof vent has a single-speed fan that circulates air, and it opens quickly and easily with the spring-loaded handle. The handle locks the translucent white, wedge-shaped dome into 10 different positions. Install kit and garnish sold separately. some light through Polar white screen snaps out for easy cleaning Vinyl weather seal helps keep water out when vent is closed Manual lift design White, 1/4" thick mounting flange is built

• Ventline

Parallel primary wire has four parallel conductors bonded together by Thermo-Plastic insulation. Each conductor is independently color coded for easy identification. Meets SAE J1128 Specifications

• Deka

Quickly and easily install a 4-way trailer connector on your vehicle. This T-One typically plugs directly into the back of your factory-installed 7-way connector so you can retain the 7-way and also pull a trailer that has a 4-pole flat. present) Connects quickly and easily - no cutting or splicing of wires Locate connection points behind rear bumper Plug in T-connector Constructed of 16-gauge bonded wire Comes with dust cap for 4-way flat

• Tekonsha

This proportional brake controller is designed to keep towing simple. Includes an LED braking indicator, a slide-bar manual override, and a knob to adjust braking power. Mounts easily within a 90-degree vertical range. brake-control wiring adapter is not available for your vehicle, one of the following will be required: 20-Amp circuit breaker (9506P - sold separately) for 2- to 4-brake applications 30-Amp circuit breaker (38630

• Tekonsha

This roof vent's powered, 12-volt fan and dome lift provide the ultimate in convenience for ventilating motor homes and enclosed trailers. Fan and wedge-shaped, plastic vent cover are operated from a remote wall switch. not required Electrical parts and interior garnish sold separately Made in the USA Specs: Fan and lift power: 12-volt DC Fan capacity: 100 CFM Cover color: white Rough opening size: 14-1/4" x 14-1/4"

• Ventline

9" Wide x 32" long x 15" tall. This sturdy, rounded fender has a durable backing plate that helps protect your trailer from debris. 16-Gauge, cold-rolled steel is built to last. Bolt or weld onto your trailer.

• etrailer

Trailer Light Mounting Bracket for 6-1/2" Oval Trailer Lights, Steel - Black Powder Coat A black, steel bracket for mounting 6-1/2" oval lights. The bracket measures 8-1/4" long x

• Optronics

6-3/8" x 2-1/4" Oval. LED trailer tail light with 6 diodes provides stop, turn, and tail function. Durable polycarbonate lens and plastic housing. Recessed mount with grommet. 3-Wire pigtail. output No bulbs to replace - no brittle filaments Durable polycarbonate lens and plastic housing Red lens over white LEDs Compatible with 12V DC systems Recessed mount with included grommet 3-Wire plug

• Buyers Products

Adapter converts from 4 pole wiring on vehicle to 7-pole round plug and 4-pole flat. Additional wire leads for brake, power and accessory.Features: Adapter converts from 4-pole wiring on your vehicle to 7-pole round plug and 4-pole flat wiring for trailer side Adds additional wire leads for brakes, power, and accessory wiring Wire

• Hopkins

The large, digital, LED display and clearly labelled buttons on this proportional controller make it easy to use. Includes 3 levels of boost, a slide-bar manual override, built-in short circuit protection, and automatic leveling.: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric brakes only Dimensions: 4-1/4" long x 2-3/4" wide x 1-1/8" tall Mounting range: 360 degrees vertically Limited

• Tekonsha