This 4-wire flat, trailer-end connector includes a 4' long, jacketed cable with stripped, color-coded wires for easy installation.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey, everybody Adam here with etrailer. Today, we're gonna be taking a look at the west bar jacketed four pole trailer connection. So the one that we have right here is about 14 foot in length, but we're also gonna have a 10 foot, an eight foot and a four foot. It's all gonna have a 14 gauge wire on the inside. And the diameter of this jacket is gonna be about 0.4 of an inch. So now all of these trailer wearings come with jackets.
This is just gonna look a little bit cleaner, but it does have a nice little shape to it. So a little bit bigger down here. So whenever you are pulling it off, one, it gives you plenty of room to be able to wrap around it. And since it's a little bit bigger here, it's gonna be kind of easier to pull it out. If you want the easiest four-pole that is the easiest to disconnect from the other side, the Hopkins has an easy pole, which just has a little circle right here.
And that's probably gonna be the only one that's a little bit easier, but it does not come with this jacket. I really like the jacket just because it's gonna protect it and looks a lot easier. And since we're using a junction box, it makes for a really, really easy and clean connection. So if you follow us down, we basically go on the inside of this tube, all the way to our junction box which is right up here by the trailer. So we're gonna have four different wires that come in here cause it's a four pole.
So if you follow me, we'll so you exactly what it looks like in the junction box, just because I like the junction boxes, they're a little bit cleaner. And if you're adding six accessories and stuff like that, it'll make a nice clean spot to be able to know exactly where everything's going. So we have the jacketed side of our trailer connection going through our junction box and we're gonna have four different wires. So we're gonna have our yellow, which is gonna be our left turn signal and our brake lights. We're gonna have our green is gonna be right.
And our brake lights, we're gonna have white, which is gonna be our ground. And then we're gonna have our brown as well, which is just gonna be your running lights, your taillights and everything else like that, including your license plate lights. So all of these kind of go in here and if you do want to grab a junction box, we do have these here at etrailer. These are just pretty much the cleanest way to wire up your trailer. The only thing that I would add to this is just a little dust cover just because it's gonna be exposed. So if you don't have a great place to put it, I mean, some people just kind of hide it underneath here, but it's not gonna be protected. So there is a dust cover specifically for this and I do recommend that you get. So now that everything's good, it is really smart to check and make sure it works before you button everything up. So we just have a little test box here. This is gonna mimic hooking up to our vehicle. So now as you can see, we do have some lights and stuff turning on. So we have everything turned on, but we're gonna test the functions. So let's start with the right turn signal. Then we're gonna go to the left. And then we want to make sure that our brake lights are working, which everything is good. So once you go through all those checks, you can button everything up and we're pretty much done with the install. If you already have your trailer and it's not really that clean when it comes to wiring and you don't really plan on putting a junction box in, all you're really gonna need to do is just grab some 14 gauge wire and some heat shrink butt connectors. And I would get some loom and we also have some loom hangers. So you're gonna run all this all the way back on the underside of your trailer, if you get on the inside of the tube, great. But a tube doesn't really work that well because it's a lot of tube, it's a lot of wire to fish through there. So you have everything that you need to hook up your trailer regardless of what kind of setup you plan on going for. Whether you go with the junction box or not, we're gonna have to run these wires back to our lights. And as you can see, we have a nice clean look. We got some loom, we got some holders. And then of course we got some lights. If you guys need lights, we've got those too, but the cleaner, the better when it comes to my trailer. So if you really want to make it nice and clean, we have everything you need to do that. All in all, I'm a fan of this one just because it has the thick little casing on the outside. And it just looks a little bit better, it matches my trailer. But if you are looking for one that's gonna be a little bit easier to pull apart, the Hopkins has one that just has a little circle on the inside, which we went over before. That one's gonna be a little bit easier, but this is pretty much checking all the boxes when it comes to trailer connections, and that is gonna do it for our look at the west bar jacketed four pole trailer connection..
Average Customer Rating: 5.0 out of 5 stars (118 Customer Reviews)
This 4-wire flat, trailer-end connector includes a 4' long, jacketed cable with stripped, color-coded wires for easy installation.This is a great replacement trailer light 4-prong connector. The wires are wrapped in an insulation cover and the connection itself is rugged and well-made. This is the one to buy.
Delivery was quick and electeical was just what I was looking for. Was able to mount bracket to hitch and running the wiring was easy with it all color coded. The single sheathed trailer plug was also what I was looking for and priced below anywhere else. Was very industrial and was almost an exact match to replace the existing one on my triton trailer.
A little short but just made connections. Works flawlessly
Just what I needed. Just went to etrailer looked it up had it in a couple of days. No stress. etrailer is the best. My go to place for anything for my trailers!
I have been very pleased with etrailer orders recently. Everything shows up when expected and products are as expected. Attached are a couple before and after pictures of my recent project to add lights to a cargo rack per my wife's request. Thanks for the professionalism of all at trailer
As described. Exactly the item we needed for our trailer wiring project.
That is exactly what I needed to repair my connection to my truck!
Easy install, clear instructions, continues to function perfectly after a year and 10,000+ miles and more than a dozen states.
I bought this to replace the one that came on my boat trailer. This is a good quality cable and molded connector. I'm sure that if I am careful with it , that it will last for as long as i need it. I have bought a number of items from etrailer and have yet to be disappointed. Good stuff, good service.
Works like the original. Fast shipping. I would buy again.
Excellent replacement cable. It has held up very well for more than a year and expect it will last many more years.
I really cannot grade the product as I never got to use it. The trailer where the wiring harness was needed ended up being in worse condition than I thought and got recycled. As far as customer service, you were great.
Get place to do business
The spring loaded connector cover on my 2014 Ram pickup was pressing so hard on my 4 prong plugs that it was breaking the conductors inside the insulation, right at the entry to the connector. I switched to using the 7 prong socket and bought a 7 - to - 4 - pole adaptor. As added insurance I added these heavy duty connectors with heavy gauge wire pigtails. Great quality on these, and a nice 4 foot pigtail clad in heavy rubber to protect from sun and other damage. Bought 2, and will be buying 4 more from etrailer for my other trailers. Fast ship from etrailer, too.
This four pin harness is heavy duty and the quality is very good. I needed to upgrade the 47 year old harness on my trailer which had multiple splices and the extra length of this product was enough to get rid of the old wiring. Looks really nice and professional. And I still can not get over the customer service and promptness when dealing with etrailer.....you guys are great, keep up the good work!!! Don't forget to order the mounting clamps to complete the installation.
I have ordered a couple things from etrailer.com com now. I set them up in my browser favorites as my "Go To" trailer parts. I am not sure how big of a company it is, but the personal customer service is exceptional. In addition to just overall service, the product itself is exactly what you should expect it to be. Every item I have order as been perfect without defects. I have not found any other sites with service like this. Thanks George.
Replacement plug is working great. The sheath cover over the actual wires should make it last along time. Easy install with heat shrink connectors I had on hand. great product at a great price. Thank you James.
Wesbar plugs are great quality. They snap together and stay connected. The pins are molded into the plug, very durable. The wire cover is heavy duty.I will definitely buy Wesbar plug harnesses again. Mike at etrailer provides great customer service. He helped me with a fender order that had the wrong picture on the web site. He reshipped the correct fender the day we spoke on the phone and rushed it to me . Thanks again Mike for your help and great customer service. That is what keeps me coming back again & again.
This product is perfect for use on utility/other trailers as it is far superior and much more durable and rugged than "plain" flat four-wire, so it will hold up much better to repeated use and weather.
Perfect in every respect. Integrated into a Honda Civic wiring harness for Break llight, LT, RT, and running lights.
This is a great product that I wish knew existed years ago. I have wired many trailers and the connection will last for many years due to the fact that the connector is molded into the actual harness instead of having 4-5 loose wires that seems to take a beating and break.
I bought two of these previously and liked them so much that I bought 3 more. 16 gauge wire is way heavier than most trailer plugs/harnesses come with, plus the plugs are heavier duty and the cable is clad in heavy rubber for protection. I would buy more but I only have 5 trailers at the moment.
This harness looks very heavy duty. I am happy I found it.
I have used errailer at different times. Each time their products have been the absolute best. Their phone clerks are knowledgeable of product and service. Shipment time has always been extreamly prompt, sometimes as little as 2 days, retailer is unaware that I grew up in a fleet service shop, I owned and operated my own for 20plus years. I also have a [retail] store that uses their service, a simple ITS THE BEST is all I should say!
This a very heavy-duty cable, even at twice the price it would be a bargain. I'm also ordered the junction box and it was easy to wire up. This set up made for a very professional installation. Could not be happier with this product. And etrailer iso a great Company to buy from, their service is the best! I have bought quite a number of items from them and always been happy with the results. Jim O
Do you have a question about this Trailer Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.