Ensure your trailer is visible and compliant with this red side marker light. It fits into a 3/4" grommet and includes a 9" wire for easy, low-profile installation.Features: Red LED side marker light provides reliable visibility for trailers and utility vehicles Compact design fits standard 3/4" grommet mount openings Half the depth of standard 3/4" lightsgreat for tight-space installations Sealed polycarbonate lens resists impact and UV damage IP68-rated construction blocks out water and dust TecSeal urethane potting protects internal circuitry Rated for over 100,000 hours of LED life Meets PC/P2 output requirements under FMVSS 108 Specs: Mounting style: 3/4" grommet Wire lead: 9" pigtail Lens color: Red Operating voltage: 9-14 V DC Current draw: 0.06-0.09 A Dimensions: 1" diameter x 5/8" depth Certifications: IP68, FMVSS 108 compliant Sealed, Waterproof Trailer Light Maintaining a functioning lighting system for your boat trailer is required by law.
Contains everything needed to repack one hub on your Lippert, Dexter, or AL-KO 3,500-lb axle.Features: Contains everything needed to repack one hub on your Lippert, Dexter, or AL-KO 3,500-lb axle Includes: 1 Outer bearing (L44649) 1 Inner bearing (L68149) 1 Inner cup (L68111) 1 Outer cup (L44610) 1 Grease seal (10-19) 1 Cotter pin 1 Tang washer for EZ-Lube spindles Outer Bearing Outer Race Inner Bearing Inner Race Seal Seal I.D. Seal O.D. L44649 L44610 L68149 L68111 10-19 1.719" 2.565"
If your trailer sits too low or drags in the rear, you don't need a whole new axle. This 4" drop spindle lets you raise the frame while keeping your existing setup, giving you more clearance and room to work without sacrificing 3,500 lb capacit ... Simplify Bearing Maintenance: E-Z Lube fitting allows grease-through servicing. Mount Standard Trailer Brakes: 4-bolt flange fits common brake assemblies. Built for 3" Axle Tubes: Weld-on spindle for compatible round tube axles. Specs Capacity: 3,500 lbs Application: 3" diameter round axle tube Weld-on installation 4-bolt brake mounting flange Drop: 4" drop Bearing and Seal Fit: Inner bearing: L68149 - 1.378" ID (fits 1.376" journal) Outer bearing: L44649 - 1.063" ID (fits 1.062" journal) Seal: 10-19 - 1.719" ID, approximately 2.565" OD hub bore (fits 1.72" seal surface)
Replacement grease seals fit a 3/4" straight spindle. Single-lip design helps keep water out and grease in.Features: Replaces worn or damaged grease seals to help maintain optimal performance of bearings Helps keep moisture out and grease in with single-lip design Made in the USA Specs: Inner diameter: 1.00" Outer diameter: 1.78" Application: 3/4" straight spindle Quantity: 2 This seal is manufactured by Transcom and is identified as 10174VB. The chart below provides a cross-reference of seals from other manufacturers.
... Includes 10" zinc rotor, aluminum caliper, bearings, seals, Trailer Buddy cap, and hardware. Fits 1-3/8" tapered spindles. Order 2 kits to service one axle.Highlights Single-wheel kit: Services one wheel end only - order 2 kits for one axle Complete DB-35 package: For 3.5K axles with 1-3/8" tapered spindles Included bearings: L68149 inner and L44649 outer gives you what you need right in the box 10" Zinc rotor: Corrosion resistant for boat trailer use Aluminum caliper: Lightweight design delivers reliable braking power Trailer Buddy cap: Pressurized grease cap helps protect and service bearings Specs Coverage per kit: 1 rotor, 1 caliper, 2 bearings, seals, 1 Trailer Buddy cap, hardware Rotor: 10" diameter, zinc plated Caliper: Aluminum construction Bearings: Inner L68149 (1.378" ID) - Outer L44649 (1.063" ID) ; races L68111 Hub pattern: 5 on 4-1/2" Spindle fit: 1-3/8" tapered spindles Note: This is a single-wheel kit.
Replacement #84 E-Z Lube spindle welds onto your 3,500-lb trailer axle. Works with L68149 inner bearing and L44649 outer bearing. Grease zerk makes greasing easy. ... Features: Tapered spindle replaces a worn or damaged #84 E-Z Lube spindle on your trailer Can also be used to build a custom axle Integrated zerk makes greasing your bearings easy Mounting flange lets you bolt on a brake assembly Weld-on installation Sturdy steel construction Castle nut, tang washer, and D-washer included Specs: Application: 3,500-lb trailer axles Spindle capacity: 1,750 lbs Stub dimensions: 1-3/4" diameter x 4-1/4" long Overall spindle length: 9" Brake flange configuration: 4 bolt Bearing, Race, and Seal Information Bearings (sold separately) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (sold separately) Inner race: L68111 Outer race: L44610 Grease seal (sold separately): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Part Number Capacity A B C D E F Round/Square TRU74FR 1,750 lbs 1.75" 1.719" 1.378" 1.063" 1.00" 4.25" Round - E-Z Lube and Brake Flange
Replacement #84 spindle welds onto your 3,500-lb trailer axle. Works with L68149 inner bearing and L44649 outer bearing. Castle nut, washer, and cotter pin included.Features: Tapered spindle replaces a worn or damaged #84 spindle on your trailer Can also be used to build a custom axle Weld-on installation Sturdy steel construction Castle nut, washer, and cotter pin included Specs: Application: 3,500-lb trailer axles Spindle capacity: 1,750 lbs Stub dimensions: 1-3/4" diameter x 6-1/2" long Overall spindle length: 11-1/4" Bearing, Race, and Seal Information Bearings (sold separately) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (sold separately) Inner race: L68111 Outer race: L44610 Grease seal (sold separately): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Part Number Capacity A B C D E F Round/Square TRU84FR 1,750 lbs 1.75" 1.719" 1.378" 1.063" 1.00" 6.50" Round
Replacement #84 spindle welds onto your 3,500-lb trailer axle. Works with L68149 inner bearing and L44649 outer bearing. Castle nut, washer, and cotter pin included.Features: Tapered spindle replaces a worn or damaged #84 spindle on your trailer Can also be used to build a custom axle Weld-on installation Sturdy steel construction Castle nut, washer, and cotter pin included Specs: Application: 3,500-lb trailer axles Spindle capacity: 1,750 lbs Stub dimensions: 1-3/4" diameter x 3-1/2" long Overall spindle length: 8-1/4" Bearing, Race, and Seal Information Bearings (sold separately) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (sold separately) Inner race: L68111 Outer race: L44610 Grease seal (sold separately): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Part Number Capacity A B C D E F Round/Square TRU64FR 1,750 lbs 1.75" 1.719" 1.378" 1.063" 1.00" 3.50" Round
Replacement spindle welds onto your 3,000-lb trailer axle. Works with AH30660FCOMP agricultural hub assembly. Castle nut, washer, and cotter pin included.Features: Tapered spindle replaces a worn or damaged spindle on your trailer Can also be used to build a custom axle Weld-on installation Sturdy steel construction Castle nut, washer, and cotter pin included Specs: Application: 3,000-lb round trailer axles Works with 30-6 agricultural hub (AH30660FCOMP - sold separately) Spindle capacity: 1,500 lbs Stub dimensions: 1-3/4" diameter x 7-1/2" long Overall spindle length: 12" Bearing, Race, and Seal Information Bearings (sold separately): Inner bearing: LM29749 (1.50" inner diameter) Outer bearing: LM67048 (1.25" inner diameter) Races (sold separately): Inner race: LM29710 Outer race: LM67010 Grease seal (sold separately): SL175 Inner diameter: 1.75" Outer diameter: 2.72" Part Number Capacity A B C D E F Round/Square TRU34FR 1,500 lbs 1.75" 1.75" 1.50" 1.25" 0.75" 7.50" Round
... Built-in shock absorption limits rattle and bottoming out. E-Z Lube, long, standard-height spindle maintains deck height. Fits any trailer frame width.Dimensions of the Timbren Axle-Less Suspension The following diagrams show measurements taken on the Timbren Axle-Less suspension system. A B C D E F 14-9/16" 16-3/8" 1-1/2" 6-1/4" 7-5/16" 5" G H I J K L 5-5/8" 8" 5-3/4" 2-1/4" 3-1/4" 5-1/4"
Replacement #84 E-Z Lube spindle welds onto your 3,500-lb trailer axle. Works with L68149 inner bearing and L44649 outer bearing. Grease zerk makes greasing easy. ... Features: Tapered spindle replaces a worn or damaged #84 E-Z Lube spindle on your trailer Can also be used to build a custom axle Integrated zerk makes greasing your bearings easy Mounting flange lets you bolt on a brake assembly Weld-on installation Sturdy steel construction Specs: Application: 3,500-lb trailer axles Spindle capacity: 1,750 lbs Stub dimensions: 2-3/8" diameter x 3" long Spindle drop/rise: 4" Overall spindle length: 8-1/4" Brake flange configuration: 4 bolt Bearing, Race, and Seal Information Bearings (sold separately): Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (sold separately): Inner race: L68111 Outer race: L44610 Grease seal (sold separately): 10-19 Inner diameter: 1.719" Outer diameter: 2.565" Part Number Capacity A B C D E F Round/Square TRU87FR 1,750 lbs 1.721" 1.376" 1.35" 1.063" 1.00" 1.234" Round - E-Z Lube and Brake Flange
Replacement spindle welds onto your 6,000-lb trailer axle. Works with AH60880FCOMP agricultural hub assembly. Castle nut, washer, and cotter pin included.Features: Tapered spindle replaces a worn or damaged spindle on your trailer Can also be used to build a custom axle Weld-on installation Sturdy steel construction Castle nut, washer, and cotter pin included Specs: Application: 6,000-lb round trailer axles Works with 60-8 agricultural hub (AH60880FCOMP - sold separately) Spindle capacity: 3,000 lbs Stub dimensions: 2-3/4" diameter x 8-5/8" long Overall spindle length: 14" Bearing, Race, and Seal Information Bearings (sold separately): Inner bearing: 506849 (2.165" inner diameter) Outer bearing: 501349 (1.625" inner diameter) Races (sold separately): Inner race: 506810 Outer race: 501310 Grease seal (sold separately): SL275 Inner diameter: 2.75" Outer diameter: 3.75" Part Number Capacity A B C D E F Round/Square TRU67FR 3,000 lbs 2.75" 2.75" 2.165" 1.625" 1.00" 8.625" Round
... Built-in shock absorption limits rattle and bottoming out. E-Z Lube, long spindle with 4" drop lowers deck height. Fits any trailer frame width.The trailing arm with integrated hanger attaches the suspension to the side and bottom of the trailer frame. The control arm carries the spindle and the hub. It pivots on strong, long-lasting polyurethane bushings that never require lubrication. The E-Z Lube, 4" drop spindle is simple to grease.
If you're dealing with a worn spindle or putting together a custom axle, this makes the job a lot more straightforward. The 4" drop helps fine-tune your trailer's ride height while still giving you solid support for everyday towing.Features: Spindle replaces a worn or damaged spindle on your trailer and can also be used to build a custom axle Drop design provides 4" drop to help adjust trailer ride height and clearance Weld-on installation secures spindle to axle Specs: Spindle capacity: 3,500 lbs Spindle drop: 4"
Round trailer axle beam measures 89" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 74" from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately).Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately) 4" Drop, Easy Grease spindles Lowered axle beam provides lower deck height for easier loading and unloading Patented welding process prevents spindle failure with 40% stronger welds Built-in grease zerk for simple lubrication Spring seats and spindles are welded on CSA , QAI , and SAE-N certified Lifetime technical support from the experts at etrailer.com Made in the USA Specs: Weight capacity: 3,500 lbs Hub-face-to-hub-face length: 89" Spring-center-to-spring-center length: 74" Axle diameter: 2-3/8" Spindle drop: 4" Spindle/hub compatibility: Bearings: L68149 inner, L44649 outer Seal: 58846, inner diameter 1.719" Limited lifetime warranty Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
Round trailer axle beam measures 89" from hub face to hub face (when hubs - sold separately - are mounted) and 74" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately) 4" Drop E-Z Lube spindles Lowered axle beam provides lower deck height for easier loading and unloading Built-in grease zerks for simple lubrication Spring seats, brake flanges, and spindles are welded on Made in the USA Specs: Weight capacity: 3,500 lbs Hub-face-to-hub-face length: 89" Spring-center-to-spring-center length: 74" Spindle drop: 4" Tubing outer diameter: 2-3/8" Bearings (sold separately): Inner bearing: L68149 Outer bearing: L44649 Brake flange configuration: 4 bolt Limited 5-year warranty Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
Round trailer axle beam measures 95" from hub face to hub face (when hubs - sold separately - are mounted) and 80" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately) 4" Drop E-Z Lube spindles Built-in grease zerks for simple lubrication Spring seats, brake flanges, and spindles are welded on Made in the USA Specs: Weight capacity: 3,500 lbs Hub-face-to-hub-face length: 95" Spring-center-to-spring-center length: 80" Spindle drop: 4" Tubing outer diameter: 2-3/8" Axle tube wall thickness: 0.156" Bearings (sold separately): Inner bearing: L68149 Outer bearing: L44649 Brake flange configuration: 4 bolt Limited 5-year warranty Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
Round trailer axle beam measures 95" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 80" from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately).Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately) 4" Drop, Easy Grease spindles Lowered axle beam provides lower deck height for easier loading and unloading Patented welding process prevents spindle failure with 40% stronger welds Built-in grease zerk for simple lubrication Spring seats and spindles are welded on CSA , QAI , and SAE-N certified Lifetime technical support from the experts at etrailer.com Made in the USA Specs: Weight capacity: 3,500 lbs Hub-face-to-hub-face length: 95" Spring-center-to-spring-center length: 80" Axle diameter: 2-3/8" Spindle drop: 4" Spindle/hub compatibility: Bearings: L68149 inner, L44649 outer Seal: 58846, inner diameter 1.719" Limited lifetime warranty Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
... Center bolt hole is 3/4" in diameter.Features: Connects double-eye springs on dual- or triple-axle trailers Springs attach to ends of equalizer with shackle straps (sold separately) Equalizer is suspended from center hanger (sold separately) Transfers load and sudden impacts from one axle to another by permitting movement between the axles Distributes weight evenly Results in smooth ride for trailer Includes pressed-in nylon bushings Specs: Fits 1-3/4" wide, double-eye leaf springs with 9/16" spring eyes Center bolt hole diameter: 3/4" Left and right bolt hole diameter: 9/16" Dimensions: Distance between outer shackle bolt holes (center on center): 7-3/4" Distance between hanger bolt hole and outer shackle bolt hole (center on center): 3-7/8" Height from shackle bolt hole to hanger bolt hole: 2-7/8"
... Center bolt hole is 3/4" in diameter.Features: Connects double-eye springs on dual- or triple-axle trailers Springs attach to ends of equalizer with shackle straps (sold separately) Equalizer is suspended from center hanger (sold separately) Transfers load and sudden impacts from one axle to another by permitting movement between the axles Distributes weight evenly Results in smooth ride for trailer Specs: Fits 1-3/4" wide, double-eye leaf springs with 9/16" spring eyes Center bolt hole diameter: 3/4" Left and right bolt hole diameter: 9/16" Dimensions: Distance between outer shackle bolt holes (center on center): 6-1/4" Distance between hanger bolt hole and outer shackle bolt hole (center on center): 3-1/8" Height from shackle bolt hole to hanger bolt hole: 2"
8" Long straight equalizer connects double-eye springs on tandem- or triple-axle trailers and allows for enough movement between the axles to keep the ride smooth and the load undisturbed. Center bolt hole is 3/4" in diameter.Features: Connects double-eye springs on dual- or triple-axle trailers Springs attach to ends of equalizer with shackle straps (sold separately) Equalizer is suspended from center hanger (sold separately) Transfers load and sudden impacts from one axle to another by permitting movement between the axles Distributes weight evenly Results in smooth ride for trailer Nylon bushings included Specs: Fits 1-3/4" wide, double-eye leaf springs with 9/16" spring eyes Center bolt hole diameter: 3/4" Left and right bolt hole diameter: 9/16" Dimensions: Distance between outer shackle bolt holes (center on center): 8" Distance between hanger bolt hole and outer shackle bolt hole (center on center): 4" Height: 1-3/4"
Nylon bushings are designed for use with trailer suspension systems. Insert them into the eyes of leaf springs or the bolt holes of equalizers to ensure proper sizing for suspension bolts.Features: Inner diameter: 9/16" Outer diameter: 3/4" Length: 1-3/4" Quantity: 6
... Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.If D = 2-5/8", then the bolt pattern is 5 on 4-1/2" If D = 2-3/4", then the bolt pattern is 5 on 4-3/4" If D = 3", then the bolt pattern is 5 on 5" If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
Filters
