Trailer Hub Grease Cap, 2.44" OD Drive In with Plug Quantity: 2 Plugs included For EZ lube axles RG04-080 Grease Cap, 2.44" OD Drive In with Plug - Qty 2
Grease cap fits EZ lube trailer hubs. Rubber lube plug for EZ Lube axles (85-1) is sold separately.Features: Grease cap for EZ lube trailer hubs Rubber plug (85-1) sold separately Drive-in installation Specs: Outer diameter: 2.44" Quantity: 1
If you've ever lost a weekend to trailer trouble, you know how important bearing protection is. The Vault system has a fully sealed, pressurized chamber that keeps out water and grit, and hybrid oil self-lubricates where it's needed.Designed for Heavy-Duty Trailers: Made for 6,000-lb Trailer Buddy axles and 2.44" hubs. All-In-One, Easy-Install Kit: Includes assemblies, O-rings, lube tube, install tool, grease fitting, and Loctite. Keeps Water and Dirt Out: Sealed chamber means nothing gets in, so you stay on the road and out of the shop.
These leveling scissor jacks with a 10,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. The bow-tie bases steady the jacks on soft surfaces. Handle included.
... This threaded Vortex grease cap fits 2,500-lb Vortex idler 6-lug hubs and hub/rotors. Includes 1 cap with 2.44" outer diameter.Features: Replaces one grease cap on Dexter Vortex trailer hubs Helps keep grease in and contaminants out Threaded design makes removal and installation easier than drive-in caps Fits 2,500-lb Vortex idler 6-lug hubs and hub/rotors Specs: Quantity: 1 cap with O-rings Outer diameter: 2.44" Thread diameter: 2.82"
Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5,200-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheel bolts, and nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes E-Z Lube-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included Hub and drum are made in the USA Specs: Application: 5,200-lb E-Z Lube trailer axles with #42 agricultural spindles Drum dimensions: 12" diameter x 2" wide Works with 12" brake assembly Bolt pattern: 6 on 5-1/2" Grease cap flange diameter: 2.44" Wheel bolt diameter: 1/2" Weight capacity: 2,600 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: LM67048 (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: LM67010 Grease seal (included): 10-10 Inner diameter: 2.125" Outer diameter: 3.376" E-Z Lube-Compatible Assembly for Simple Lubrication The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy.
Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5,200-lb and 6,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, wheel bolts, and nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Pre-greased hub is easy to install - no need to pack bearings Sturdy iron construction Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included Hub and drum are made in the USA Specs: Application: 5,200-lb and 6,000-lb E-Z Lube trailer axles with #42 spindles Drum dimensions: 12" diameter x 2" wide Bolt pattern: 6 on 5-1/2" Grease cap flange diameter: 2.44" Wheel bolt diameter: 1/2" Weight capacity: 3,000 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 15123 (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 15245 Grease seal (included): GS-2125DL Inner diameter: 2.125" Outer diameter: 3.376" E-Z Lube-Compatible Assembly for Simple Lubrication The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy.
Hub-and-drum assembly fits 5,200-lb to 7,000-lb axles with spindles that require a 2-1/8" grease seal. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Sturdy iron construction Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included Hub and drum are made in the USA Specs: Application: 5,200-lb to 7,000-lb trailer axles that require 2-1/8" inner diameter grease seal Also fits spindles that take a 2-1/4" inner diameter grease seal - requires RG06-070 (sold separately) Drum dimensions: 12" diameter x 2" wide Works with 12" brake assembly Bolt pattern: 8 on 6-1/2" Wheel stud diameter: 1/2" Grease cap flange diameter: 2.44" Weight capacity: 3,500 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 14125A (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS-2125DL Inner diameter: 2.125" Outer diameter: 3.376" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
Hub is designed for use on trailer idler axles. Fits 5,200-lb axles. Inner bearing (25580) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheel bolts, and lug nuts included.Features: Trailer hub assembly fits idler axles Bearings, races, seal, grease cap, wheel bolts, and lug nuts are included Sturdy iron construction Hub and drum are made in the USA Specs: Application: 5,200-lb trailer axles Wheel size: 14" to 16-1/2" Bolt pattern: 6 on 5-1/2" Wheel studs: 1/2" diameter x 2" long Grease cap flange diameter: 2.44" Weight capacity: 3,000 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: LM67048 (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: LM67010 Grease seal (included): 10-10 Inner diameter: 2.125" Outer diameter: 3.376" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
Trailer axle measures 86-1/2" from hub face to hub face, 71-1/2" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs Low ride height makes it easier to load and unload your trailer Straight, E-Z Lube spindles - no drop Built-in grease zerks for simple lubrication Spring seats and spindles are welded on Electric brakes are easy to install - no actuator or hydraulic lines necessary Adjuster plugs, mounting bolts, and hardware included Cast iron hubs and drums are sturdy and durable Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included Made in the USA Specs: Weight capacity: 5,200 lbs Hub-face-to-hub-face length: 86-1/2" Spring-center-to-spring-center length: 71-1/2" Drum dimensions: 12" diameter x 2" wide Bolt pattern: 6 on 5-1/2" Brake flange configuration: 5 bolt Axle tubing outer diameter: 3" Grease cap outer diameter: 2.44" Wheel stud diameter: 1/2" Wheel size: 14-1/2" - 16" Limited 5-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: LM67048 (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: LM67010 Grease seal (included): RG06-070 Inner diameter: 2.25" Outer diameter: 3.376" Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
Hub is designed for use on idler axles with agricultural applications. Fits 6,000-lb axles. Inner bearing (25580) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheel bolts, and lug nuts are included.Features: Trailer hub assembly fits idler axles Hub is for agricultural applications Grease seal, grease cap, wheel bolts, and lug nuts are included Bearings included Races pressed into the hub Sturdy iron construction Hub and drum are made in the USA Specs: Application: 6,000-lb trailer axles with agricultural applications Bolt pattern: 6 on 6" Grease cap flange diameter: 2.44" Weight capacity: 3,000 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: LM67048 (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: LM67010 Grease seal (included): GS-2250DL Inner diameter: 2.25" Outer diameter: 3.376" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
Trailer axle measures 86-1/2" from hub face to hub face, 71-1/2" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs Low ride height makes it easier to load and unload your trailer Straight, E-Z Lube spindles - no drop Built-in grease zerks for simple lubrication Spring seats and spindles are welded on Electric brakes are easy to install - no actuator or hydraulic lines necessary Adjuster plugs, mounting bolts, and hardware included Cast iron hubs and drums are sturdy and durable Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included Made in the USA Specs: Weight capacity: 6,000 lbs Hub-face-to-hub-face length: 86-1/2" Spring-center-to-spring-center length: 71-1/2" Drum dimensions: 12" diameter x 2" wide Bolt pattern: 6 on 5-1/2" Brake flange configuration: 5 bolt Axle tubing outer diameter: 3" Grease cap outer diameter: 2.44" Wheel stud diameter: 1/2" Wheel size: 14-1/2" - 16" Limited 5-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 15123 (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 15245 Grease seal (included): GS-2125DL Inner diameter: 2.125" Outer diameter: 3.376" Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
Hub is designed for use on trailer idler axles. Fits 5,200-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheel bolts, and lug nuts included.Features: Trailer hub assembly fits idler axles Bearings, races, seal, grease cap, wheel bolts, and lug nuts are included E-Z Lube-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Hub and drum are made in the USA Specs: Application: 5,200-lb E-Z Lube trailer axles Wheel size: 14" to 16-1/2" Bolt pattern: 6 on 5-1/2" Grease cap flange diameter: 2.44" Wheel stud diameter: 1/2" Weight capacity: 3,000 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: LM67048 (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: LM67010 Grease seal (included): 10-10 Inner diameter: 2.125" Outer diameter: 3.376" E-Z Lube-Compatible Hub for Simple Lubrication The grease cap on this hub is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy.
Trailer axle measures 95" from hub face to hub face and 80" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs Low ride height makes it easier to load and unload your trailer Straight, E-Z Lube spindles - no drop Built-in grease zerks for simple lubrication Spring seats and spindles are welded on Electric brakes are easy to install - no actuator or hydraulic lines necessary Adjuster plugs, mounting bolts, and hardware included Cast iron hubs and drums are sturdy and durable Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included Made in the USA Specs: Weight capacity: 6,000 lbs Hub-face-to-hub-face length: 95" Spring-center-to-spring-center length: 80" Drum dimensions: 12" diameter x 2" wide Bolt pattern: 6 on 5-1/2" Brake flange configuration: 5 bolt Axle tubing outer diameter: 3" Grease cap outer diameter: 2.44" Wheel stud diameter: 1/2" Wheel size: 14-1/2" - 16" Limited 5-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 15123 (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 15245 Grease seal (included): GS-2125DL Inner diameter: 2.125" Outer diameter: 3.376" Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
Great for coastal or snowy areas, these Dacromet-coated disc brakes offer a safe ride. Short stopping distances and consistent braking keep your trailer from pushing and pulling. Includes inner (25580) and outer (15123) bearings.Features: Lets you upgrade your trailer from drum to disc brakes for superior performance Resists rust - great for boat trailers and trailers used in coastal areas or on heavily treated roads Dacromet finish offers excellent rust and corrosion resistance with a 300- to 400-hour salt spray rating Offers dramatically shorter stopping distances and smooth, controlled braking Ceramic brake pads increase stopping power Large, stainless steel piston provides fast, responsive braking Requires minimal maintenance, saving you time and money 1-Piece hub-and-rotor assembly reduces the chance of uneven rotor wear Vented design dissipates heat faster to prevent premature brake pad wear High-quality, automotive-grade construction is long-lasting Includes everything you need to upgrade brakes for 1 axle 2 Integral hub-rotor assemblies come with bearings, races, oil seals, oil caps, synthetic bearing oil, wheel bolts, and lug nuts Hydraulic brake actuator rated at 1,500 psi or above and brake lines (sold separately) are required to activate brakes Specs: Axle capacity: 5,200 lbs - 6,000 lbs #42 Spindle Wheel size: 15" and larger Bolt pattern: 6 on 5-1/2" Rotor diameter: 12" Piston diameter: 2-1/4" Brake flange configuration: 5 bolt Wheel bolt diameter: 1/2" 3-Year warranty Bearing, Race, and Seal Information Bearings Inner bearing: 25580 Outer bearing: 15123 Races Inner race: 25520 Outer race: 15245 Kodiak XL ProLube oil bath kit Seal inner diameter: 2.250" Seal outer diameter: 3.376" Cap outer diameter: 2.44" Complete Kit Contents 2 Dacromet-plated, cast iron hub-and-rotor assemblies 2 Dacromet-plated, cast iron calipers 2 Dacromet-plated, ductile iron caliper mounting brackets 4 Stainless steel caliper mounting bolts 2 Inner bearings 2 Outer bearings 2 Inner races 2 Outer races 2 Oil seals 2 Oil caps (1) 8-oz Bottle of synthetic bearing oil (12) 1/2" Wheel bolts (12) 1/2" Zinc-plated steel lug nuts Perfect for Boat Trailers If you tow a boat trailer, live in a coastal area, or experience a lot of snow, slush, and salt on the roads, you know how corrosive salt and water can be.
Cap assembly replaces the grease cap on your Dexter or Tie Down Vortex trailer hubs. Includes 1 threaded cap that fits 2,500-lb to 4,200-lb hubs.Specs Application: Fits 2,500-lb - 4,200-lb idler hubs and hub/rotors Fits Vortex K71-G01-73 (81143) 21-261 Thread and Seal Details: 2 5/16-11 Threads with Viton O-ring Weight: .244 lbs. Construction and Color: Aluminum Silver with white lettering Quantity: 1 cap
Replacing your bearings? Get this replacement cap now and you won't need to wait on it to finish the job later. Fits most 5,200-lb to 6,000-lb trailer hubs.Features: Stainless steel construction is rustproof Great for marine environments Drive-in installation Removable silicone plug included Lets you easily grease a Dexter E-Z Lube or etrailer Easy Grease axle Specs: Application: trailer hubs with an inner diameter (hub bore) of 2.44" Most hubs rated for 5,200 lbs to 6,000 lbs Dimensions: Flange diameter: 2.45" Overall height: 1-1/2" Quantity: 1 grease cap with silicone plug
Cap assembly replaces the grease cap on your Dexter or Tie Down Vortex trailer hubs. Includes 1 threaded cap that fits 2,500-lb to 4,200-lb hubs.Specs Application: Fits 2,500-lb - 4,200-lb idler hubs and hub/rotors Fits Vortex K71-G01-73 (81143) 21-261 Thread and Seal Details: 2 5/16-11 Threads with Viton O-ring Weight: .244 lbs. Construction and Color: Aluminum Black with yellow lettering Quantity: 1 cap
Hub is designed for use on agricultural trailers without brakes. Fits 7,000-lb axles. Inner bearing (LM501349) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheel studs, and wheel nuts are included.Features: Trailer hub assembly fits farm trailers Designed for non-braked axles Built-in grease fitting makes for fast, easy lubricating Grease seal, grease cap, (6) wheel nuts, and bearings are included Races and wheel studs come pre-installed in hub Specs: Application: 7,000-lb trailer axles with agricultural spindles Use with TRP spindle # SP-356200-130 Weight capacity (at max 20 mph): 3,500 lbs Bolt pattern: 6 on 6" Pilot hole diameter: 4.62" Grease cap flange diameter: 2.44" Wheel offset: 1.12" Bearing, Race, and Seal Information Bearings (included) Inner bearing: LM501349 (1.625" inner diameter) Outer bearing: LM67048 (1.25" inner diameter) Races (included) Inner race: LM501310 Outer race: LM67010 Grease seal (included): AG-GS-30662000SL Inner diameter: 2.000" Outer diameter: 3.066" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
Perfect for coastal or snowy areas, these Dacromet- and KodaGuard-coated disc brakes offer a safe ride. Short stopping distances and consistent braking keep your trailer from pushing and pulling. Includes inner (25580) and outer (15123) bearings.Features: Lets you upgrade your trailer from drum to disc brakes for superior performance Provides excellent rust protection - great for boat trailers and trailers used in coastal areas or on heavily treated roads Dacromet finish on hub-rotors and brackets offers excellent rust and corrosion resistance with a 300- to 400-hour salt spray rating KodaGuard coating on calipers offers superior rust and corrosion resistance with a 500- to 600-hour salt spray rating Offers dramatically shorter stopping distances and smooth, controlled braking Ceramic brake pads increase stopping power Large, stainless steel piston provides fast, responsive braking Requires minimal maintenance, saving you time and money 1-Piece hub-and-rotor assembly reduces the chance of uneven rotor wear Vented design dissipates heat faster to prevent premature brake pad wear High-quality, automotive-grade construction is long-lasting Includes everything you need to upgrade brakes for 1 axle 2 Integral hub-rotor assemblies come with bearings, races, oil seals, oil caps, synthetic bearing oil, wheel bolts, and lug nuts Hydraulic brake actuator rated at 1,500 psi or above and brake lines (sold separately) are required to activate brakes Specs: Axle capacity: 5,200 lbs - 6,000 lbs #42 Spindle Wheel size: 15" and larger Bolt pattern: 6 on 5-1/2" Rotor diameter: 12" Piston diameter: 2-1/4" Brake flange configuration: 5 bolt Wheel bolt diameter: 1/2" 3-Year warranty Bearing, Race, and Seal Information Bearings Inner bearing: 25580 Outer bearing: 15123 Races Inner race: 25520 Outer race: 15245 Kodiak XL ProLube oil bath kit Seal inner diameter: 2.250" Seal outer diameter: 3.376" Cap outer diameter: 2.44" Complete Kit Contents 2 Dacromet-plated, cast iron hub-and-rotor assemblies 2 KodaGuard-coated, cast iron calipers 2 Dacromet-plated, ductile iron caliper mounting brackets 4 Stainless steel caliper mounting bolts 2 Inner bearings 2 Outer bearings 2 Inner races 2 Outer races 2 Oil seals 2 Oil caps (1) 8-oz Bottle of synthetic bearing oil (12) 1/2" Wheel bolts (12) 1/2" Zinc-plated steel lug nuts Perfect for Boat Trailers If you tow a boat trailer, live in a coastal area, or experience a lot of snow, slush, and salt on the roads, you know how corrosive salt and water can be.
Trailer axle measures 95" from hub face to hub face and 80" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs Low ride height makes it easier to load and unload your trailer Straight, E-Z Lube spindles - no drop Built-in grease zerks for simple lubrication Spring seats and spindles are welded on Electric brakes are easy to install - no actuator or hydraulic lines necessary Adjuster plugs, mounting bolts, and hardware included Cast iron hubs and drums are sturdy and durable Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included Made in the USA Specs: Weight capacity: 5,200 lbs Hub-face-to-hub-face length: 95" Spring-center-to-spring-center length: 80" Drum dimensions: 12" diameter x 2" wide Bolt pattern: 6 on 5-1/2" Brake flange configuration: 5 bolt Axle tubing outer diameter: 3" Grease cap outer diameter: 2.44" Wheel stud diameter: 1/2" Wheel size: 14-1/2" - 16" Limited 5-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: LM67048 (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: LM67010 Grease seal (included): RG06-070 Inner diameter: 2.250" Outer diameter: 3.376" Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
Trailer axle measures 89" from hub face to hub face and 74" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs Low ride height makes it easier to load and unload your trailer Straight, E-Z Lube spindles - no drop Built-in grease zerks for simple lubrication Spring seats and spindles are welded on Electric brakes are easy to install - no actuator or hydraulic lines necessary Adjuster plugs, mounting bolts, and hardware included Cast iron hubs and drums are sturdy and durable Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included Made in the USA Specs: Weight capacity: 6,000 lbs Hub-face-to-hub-face length: 89" Spring-center-to-spring-center length: 74" Drum dimensions: 12" diameter x 2" wide Bolt pattern: 6 on 5-1/2" Brake flange configuration: 5 bolt Axle tubing outer diameter: 3" Grease cap outer diameter: 2.44" Wheel stud diameter: 1/2" Wheel size: 14-1/2" - 16" Limited 5-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 15123 (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 15245 Grease seal (included): GS-2125DL Inner diameter: 2.125" Outer diameter: 3.376" Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
Hub is designed for use on trailer idler axles. Fits 6,000-lb axles with #42 spindles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, wheel bolts, and lug nuts included.Features: Trailer hub assembly fits idler axles Bearings, races, seal, grease cap, wheel bolts, and lug nuts are included Sturdy iron construction Hub and drum are made in the USA Specs: Application: 6,000-lb trailer axles with #42 spindles Wheel size: 16" to 18-1/2" Bolt pattern: 6 on 5-1/2" Grease cap flange diameter: 2.44" Wheel bolt diameter: 1/2" Weight capacity: 3,000 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 15123 (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 15245 Grease seal (included): 10-36 Inner diameter: 2.25" Outer diameter: 3.376" Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
Filters
