Result: 13194

While we do not carry the Glo-Brite 9500c-88 you currently have, we do have a light that will work as a replacement for you. From the information I could find on your Glo-Brite 9500c-88, it measures 2" in diameter. For the clear light, you would…

The most popular trailer wheel bolt pattern is the 5 on 4-1/2 inch bolt pattern and as far as we are aware the bolt pattern you mentioned is not used on trailers at all. So my bet is you probably have the 5 on 4-1/2 inch. I attached a help article…

If you need a 6 lug on 5.5 inch bolt pattern then you will need the following hubs. 8-213-5UC1-EZ 6 on 5.5 Idler Hub Bearings 25880 inner and 15123 outer 8-201-9UC3-EZ 6 on 5.5 Hub and Drum Bearings 25880 inner and 15123 outer If you need a 8 lug on…

Thanks for the picture! I have a solution for you but we do not have that exact size, however we do have something that will work. I recommend the Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" White Spoke Wheel - 5 on 4-1/2 - LR D…

For a replacement of the NOK AB1990E grease seal you'll need the Grease Seal #13194.

The torque for the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility #8-174-5UC3 is not specified by the manufacturer. For 9/16 inch studs, the typical lug nut torque will be 120-140 ft lbs based on most…

I attached a picture that has a chart with all of the error codes for the Prodigy P2 part #90885 that you referenced. I am not sure what you mean by dashes on the display so hopefully the chart helps you. Feel free to email back with pictures of the…

If the existing grease seal on your trailer is in fact the NOK part #AB1990E that you referenced in your question, then I recommend using the Redline Grease Seal #13194 as a replacement. This is a confirmed replacement for the NOK model and the…

The UFP hub that you've referenced isn't made any longer I don't believe, but we do have some options for you. From some previous customers, we've determined that the UFP H-1062-3 axle has a spindle that has #L44649 inner and outer…

The closest metric trailer tire size to a 4.80x12 is going to be a 145/80-12. The typical diameter of a 4.80x12 tire is 20.5 inches. On a 145/80-12, it is 21.3 inches. So the metric size will be a little over 1/4 inch taller. Make sure to measure the…

Hello Mark, thanks for getting in touch. The 145/R12 tires and the 4.80-12 are similar but not exactly the same size. The 4.80-12 tires are 4.9" wide and 20.7" in diameter when fully inflated. The 145/R12 tires are going to be about…

This is a fairly straightforward install. GM has already run some of the necessary wiring from the rear frame rail area to the engine compartment, so you will see a blue wire for the electric brake function, and an orange wire which provides 12 volt…