Install a 4-way trailer connector on your vehicle without cutting or splicing into your wiring. Zero-contact interface sensors identify the current flowing through each wire by simply clamping onto it. Circuit-protected module is made using SMT.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.
Install a 4-way flat on your vehicle with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.
Hello Hannah, thanks for reaching out. Between those two hitches for the 2026 Equinox EV, the Draw-Tite #DT66KV has the best ground clearance. The crosstube for the hitch sits slightly higher compared to the Curt. With the Draw-Tite hitch it will be…
For your 2018 Lexus RX350L the wiring harness #118255 is not a fit. You will use the harness #118252 if you have the factory tow package. This harness will be near the hitch on the driver's side of the vehicle and this harness has a protective…
The Zephyr conversion didn't do anything to change the rear bumper and frame area of your 1992 Ram 250 van, so a standard hitch would work great for you. I'd recommend the Curt Class III Receiver Hitch #C13041. The hitch has a 6000 lb…
I recommend checking out the Curt Trailer Hitch Receiver #C13041 for your 1997 Dodge Van with the regular bumper. This is a Class III hitch with a 2" receiver rated for 600 lbs tongue and 6,000 lbs towing so it will be prefect for basically any…
If your 1991 Dodge Ram did not come with trailer wiring, you will first need to install a 4-Way wiring harness #18252. You will need to use the included circuit tester to test the vehicle tail light wiring. The tail light wire with left turn signal…
There are a number of factors involved when converting a semi 7-way to an RV 7-way. Semis generally use a 7-pin round pin socket, similar to #PK11720. And RV style 7-way uses blades, like #PK12706. We do not offer any pre-made adapters to make this…
I have a solution for you, but we do not have a double lip grease seal with the exact measurements you specified. However I was able to find out that the GS-1250 DL that you mentioned has the following measurements: Inside Diameter: 1.249"…
If your step motor marked "REP 851" and the Part Number sticker says "32 Series Step," the replacement step motor kit you need is the Kwikee #LC379145 Motor Upgrade Kit. You can further confirm that you have a Series 32 step kit…
For your 2024 Audi A4 Allroad I recommend the Curt Trailer Hitch Receiver #C11448. This is a Class I hitch with a 1-1/4" receiver. It features a bolt-on installation and also comes with a limited lifetime warranty. The hitch has a 200 lb max…
The Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger - 12V - 45 Amps part #PD9245C is not compatible with lithium batteries. Instead, you will need the Progressive Dynamics Inteli-Power RV Converter and Battery Charger part…
I have 2 different hitch options for your 2022 Volkswagen Tiguan SE R-Line for you to check out and it just depends on what price point and style of hitch you're wanting to add to your vehicle. For a standard hitch I recommend going with the…
You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.
Filters
