2008 Ford Ranger Salt Spreader

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hi Scott, We do have a couple options for running boards that fit your 2025 Dodge Durango R/T Anniversary Plus, from Romik. These are from Romik, and you have a couple of styles to choose from: - Romik RB2 Running Boards w/ Custom Install Kit…

While we don't have any custom fit trailer wiring harnesses that fit the 2011 Isuzu NPR we can still help with a universal fit option like the #C56175 which you'd have to wire to the taillight circuits of your NPR.

Hello Lou, thanks for reaching out. The hitch pin you are looking for is the etrailer D-Shape Anti-Rattle Locking Hitch Pin for Benton Hitch Accessories #e43JR. This will work with the Benton #B54VR bike rack you mentioned, as well as the #B54FR,…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Yes, it will Leonard! The Draw-Tite Hitch item #DT22MR has been confirmed to fit the 2025 Kia Sportage. This class III hitch is custom fit and bolts to your Kia with included hardware. It has a 2" receiver with a 3,500 lbs towing capacity and a…

Hi Dan, The etrailer Trailer Hitch Receiver #e36YR is 42" overall and the crosstube measures 36" in length. It's designed to fit 2019 - 2025 Chevrolet Blazers (excluding Premier models). If you need anything else just let me know and…

Hi Jerry, For your 2025 Kia Sorento PHEV you would need the Curt Trailer Hitch Receiver #C37RV for the trailer hitch. The right light kit for your Sorento is going to depend on a few factors. For models with the tow package, like you stated you have,…

Hey Brian! I'll start out by confirming that both the Draw-Tite item #DT94YR and our etrailer item #e25TR hitches fit the 2024 Subaru Outback Wilderness. The hitch pin hole sits 2" back from the edge of the bumper on the Draw-Tite item…

The Isuzu NPR models are not factory wired for an electric brake controller. If you already have a 4-way trailer connector, then you will use the wiring kit #ETBC7 to hardwire your brake controller. If you already have a 7-way trailer connector, then…

Have you tested the brake controller output on the 2025 Silverado's 7-way and confirmed that it's sending power back to the trailer when the manual override is being activated? When you say the brakes aren't activating as they should do…

I recommend the Timbren Front Suspension Enhancement System #T74FR for the front of your Redesigned 2019 Chevrolet Silverado 1500. I feel that this system will provide you with better stability as the resistance will increase as the spring…