Search: xfactor crossmember   >  

Thanks for the pictures! Since your 2022 Grand Design Reflection 303RLS came with the CRE3000 equalizers you will need three of the MORryde X-Factor Crossmember item #MR33WR. It looks like you have the standard 3" wide frame hanger so all of…

The MORryde X-Factor Crossmember part #MR33WR is designed for standard suspension so that is the one you will need to use. If your leaf spring hanger brackets are wider than 3" then you will need to drill per the instructions which I have…

It is likely you can avoid the drain line when installing the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR by using the MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications #MR43WR. I don't know exactly the…

I reached out to MORryde for you and obtained the information that you requested for the MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications part #MR43WR. I assume you're trying to clear some sort of drain line and if that's…

From the top of the bracket of the MORryde X-Factor Dropdown Crossmember #MR84AR down to the top of the crossmember measures 4 inches.

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The correct wet bolt/ shackle upgrade kit for your MORryde CRE/3000 axle will depend on the length of your current shackle links, measured center hole to center hole. For 2-1/4 inch shackle links, use #MR46ZR or for 3-1/8 inch shackle links, use…

The MORryde X-Factor Crossmember part #MR33WR attaches to the leaf spring hangers which are located in-between and in the front and rear of each axle. I have attached a photo below to clarify. Therefore, you'll need three for full support on a…

I went ahead and reached out to my contact at MORryde, and she confirmed that the X-Factor Crossmember for CRE, SRE, or Stock Leaf Spring Suspension #MR33WR will come with new mounting hardware. The plates on the cross member do add thickness, so the…

We do have 3-1/2 inch u-bolts with the part #175666 for axle attachment. The diameter of the stud is 9/16 inch.

The Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks #RM-2470-2580 will fit on axles no more than 41-1/2" apart on center. The included slipper springs are 26-3/4" long.

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…