Search: trailer couplers   >   Accessories and Parts   >   !Redarc  x   >  

Yes, I do have the exact dimensions you need of the Demco Channel Tongue Trailer Coupler part #DM15945. I have attached these for you below.

I do have an option for you but I cannot give you exact bearing numbers for your trailer unless provided with spindle measurements or the trailer's VIN (if the manufacturer is still in business). I can however tell you that the two most…

We do have a compatible grease seal for your 168255TC oil seal, however, we do not carry rubber coated seals in this size. The 168255TC oil seal was designed to work with oil bath hubs on a 3,500 lb axle. For the most part, axle manufacturers have…

The 168255TC oil seal is designed for use on for oil bath hubs, but they can be used on grease hubs. They basically just provide a better seal to hold oil in; they will still work for grease. The springs on your oil seals are required to function…

Yes, your 2007 Honda Fit Sport with a manual transmission can be flat towed behind an RV. You'd need to start with a base plate kit like the part #521558-1 which is a confirmed fit. In addition to the base plates, you will also need a compatible…

Yes the coupler part #DM13689-52 that you referenced is lockable. For a pin style lock the part #28012 would work well. Or for a lock that goes around the coupler opening the part #BLTL-20-40D would be a great option. I attached review videos for…

You could install disc brakes on the Timbren Axle-Less Suspension #ASR5200S01. You would use one of the kits from the link I have included to the right. All of these kits have a 6 on 5-1/2 bolt pattern. The kits linked take the same inner bearing but…

The Demco Channel Tongue Trailer Coupler - eZ-Latch #DM15945 is designed for a 3"x3" tube.

The spindle diameter of the Timbren kit part #ASR35HDS02 where the seal rides is definitely 2.25 inch so to go with a disc brake setup for this setup will require a hub that has that size seal. That said, the Kodiak Disc brake kit part #K2HR526DKG…

The overall length of the Demco Channel Tongue Trailer Coupler #DM15945 is 11.042".

I have added a link to a help article for you which has the formula you need that allows you to determine exactly where to position your axles on a trailer. Using this formula, based on measurements you'll need to take and the weight of the…

Many couplers like the #DM15945 do not come with a safety pin. This likely cuts cost out of the product and allows you to use an existing safety pin if you have one, choose your own, or add a lock instead. This particular coupler has a 5/16"…