Search: rain spouts   >   !RV Levels   >   Jensen  x   >  

Thank you for your recent purchases from etrailer. A bad or insufficient ground is among the most common causes for issues with trailer lighting. The Peterson License Plate Light #PM436B that you have does use its steel mounting surface to make the…

The Peterson License Plate Light w/ Steel Mounting Bracket #PM436B grounds through it's mounting hardware so the single wire is the power wire for the light (attaches to running light circuit).

We don't have an exact replacement for that license plate bulb. I recommend replacing the entire unit with the Peterson License Plate Light with Bracket, #PM436B. The internal parts are all stainless steel or brass to extend the life of this…

We can certainly get you rain gutter spouts for your Winnebago, and there is a really good option from Camco: - Camco RV Rain Gutter Spouts with Built-In Extensions - Slide On #CAM42452 I like these because of the built-in extensions that ensure the…

When wiring a 2-wire license plate bracket, such as the Optronics LED #LPL55CB, you are correct that the white wire will be for ground and the black wire is used for the running lights. The white wire from the bracket should be attached to a clean,…

In regards to the Optronics LED Trailer License Plate Light part #LPL55CB, the black wire is for power and the white wire is a ground. The black wire will be hooked up to the running light circuit which is usually a brown wire. If you have a ground…

You will need to use a quick splice, item #SWC502905-1, and splice the black wire from the LED Trailer License-Plate Light, item #LPL55CB, into the taillight wire on your trailer. The taillight wire is normally the brown wire, but you should use a…

Your old light must be a model that grounds through the mounting hardware. The new light has a separate ground wire. The white wire is the ground and it will attach to a clean metal surface. The black wire is the power wire.

Run the white wire on your trailer to the mounting bolt of the new license plate light. Your current light ground through the mounting hardware so you'd just need to connect the ground wire there and you'd be good.

When measuring for a trailer cover you want to measure from the front of the trailer box, not the tongue, to the rear including anything that is attached to the rear. This will include a spare or a ladder at the farthest edge at the rear of the…

We currently offer three different types of gutter extensions in two different colors which are listed for you below. Camco RV Rain Gutter Extensions (White) part #CAM42462 Camco RV Rain Gutter Extensions (Black) part #CAM42452 Camco RV Rain Gutter…

The Jensen RV Stereo AWM965 is not Bluetooth compatible nor am I aware of any adapter that would give the device this feature. Therefore, the best option would be to upgrade with the Jensen RV Stereo part #JWM60A. The Jensen JWM60A like the Jensen…