See what our Experts say about this CURT Trailer Hitch Ball Mount

• Will Curt Rebellion XD Ball Platform Fit Curt Adjustable 2-Ball Mount
  The channel on the # C28KR is too narrow to fit on the Curt Adjustable 2-Ball Mount # C99NR (45935) shank. What you can use instead is the Ball Mount Adapter for Convert-A-Ball Cushioned Weight Distribution Shank # BA-1. This has a 1" diameter hole so you can use a hitch ball like the # C40002.
  view full answer...
• Can Curt Adjustable 2-Ball Mount be Used in Rise and Drop Position
  Hey Luke, the Curt adjustable ball mount part # C99NR can be used in the rise or drop position without any reduction in capacity. Here are the specs: Gross towing weight: When used with 2" ball: 10,000 lbs When used with 2-5/16" ball: 15,000 lbs Tongue weight: When used with 2" ball: 1,000 lbs When used with 2-5/16" ball: 1,500 lbs
  view full answer...
• Weight of Curt Adjustable 2-Ball Mounts
  Hi Allen; the weight of the Curt Adjustable 2-Ball Mount - 2" Hitch # C99NR is 36.59 lbs and the Curt Adjustable 2-Ball Mount - 2-1/2" Hitch # C79NR is 38.61 lbs. Assuming you have a 2-1/2" hitch you would need a reducer sleeve like the # BTBRV64FR to use the # C99NR with a 2" shank.
  view full answer...
• What Is The Towing Capacity Of 2011 Ford F350 6.7L XLT SRW Crew Cab 8' Bed?
  Hello CJ, thanks for reaching out. Based on the towing capacity chart I found online, the bumper pull capacity of a 2011 Ford F350 6.7L SRW Crew Cab is 14,000 lbs. The Curt Adjustable 2-Ball Mount # C99NR has a 10K capacity when used with the 2" ball, and a 15K capacity with the 2-5/16" ball. So as long as the 5-1/2" drop is sufficient for your trailer, that will be a great choice for a ball mount.
  view full answer...
• Parts Needed To Tow RV Trailer Behind 2026 Jeep Grand Wagoneer
  Hello Raymond, thanks for reaching out, and congrats on the new Jeep! We actually rented a Grand Wagoneer when I was in California last summer and it was fantastic! The 2026 Grand Wagoneer should come with an OEM trailer hitch and factory 4-flat wiring. So assuming your RV trailer has electric brakes, you will need to add a 7-way plug and brake controller. For that you can use the following: - 7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires # ETBC7L - Tekonsha...
  view full answer...
• Locking Hitch Pin Kit Recommendation for 15K Curt Adjustable 2-Ball Mount
  I recommend using the Curt Lock Set # C23556 for your Curt Adjustable 2-Ball Mount # C99NR. This comes with a lock for the hitch receiver and one for the ball mount platform. Even though your platform uses 2 pins, only 1 locking pin is needed to secure everything to your vehicle.
  view full answer...
• Which Locking Pin Will Fit The Adjustable Ball On The Curt Adjustable 2-Ball Mount # C99NR?
  The Curt Adjustable 2-Ball Mount # C99NR uses Pins # C56NR which are 3/4" in diameter and have a usable length of 3-3/4". You will need the InfiniteRule Lock # IR36FR which is also 3/4" in diameter with a 3-7/8" span to lock the adjustable ball.
  view full answer...
• Anti-Rattle Recommendation for 15K Curt Adjustable 2-Ball Mount
  To add an anti-rattle device to the Curt Adjustable 2-Ball Mount # C99NR I highly recommend the Roadmaster Quiet Hitch # RM-061 simply because it's a tried-and-true solution that's easy to use and still very effective. The Quiet Hitch essentially clamps the shank of your ball mount to the inside of the hitch receiver and keeps it from moving that way. I've attached a review video of this system for you to check out.
  view full answer...
• How to Tell if Rock Tamers Mud Flaps Will Fit with Curt Adjustable 2-Ball Mount
  The Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2" Hitches # ERT00108 requires at least 1" of the shank to properly fit. I went out and measured the shank on the Curt Adjustable 2-Ball Mount # C99NR and found the from the center of the hitch pin hole to the gusset on the shank measured right at 3-3/8" (see attached). To ensure fitment I recommend rounding down to 3-1/4" for proper clearance. Then all you have to do is measure from the center of the hitch pin hole to the face...
  view full answer...
  
• Distance From Center of Hitch Pin Hole to Center of Ball on Curt Adjustable 2-Ball Mount
  It sounds like you're looking for the distance from the center of the hitch pin hole to the center of the ball on the Curt Adjustable 2-Ball Mount # C99NR. That measurement is 12-1/4".
  view full answer...
• Can the Ball Mount Adapter for Convert-A-Ball WDS Work W/ the Curt Adjustable 2-Ball Mount?
  Yes you can use the Ball Mount Adapter for Convert-A-Ball Cushioned Weight Distribution Shank # BA-1 with your Curt Adjustable 2-Ball Mount # C99NR as they have the same 1-1/4" hole spacing and use the same 3/4" adjustment pins.
  view full answer...
• What Does Curt Adjustable Ball Mount # C99NR Weigh
  The Curt adjustable ball mount part # C99NR that you referenced weighs 36 lbs.
  view full answer...
• Distance From Top of Shank to Bottom of Curt Adjustable 2-Ball Mount
  The distance from the top of the shank to the bottom of the Curt Adjustable 2-Ball Mount # C99NR is 8-1/2".
  view full answer...
• Will Curt Adjustable 2-Ball Mount Work With 2024 Toyota 4Runner SR5 Towing Small RV
  Hi David; more than likely the answer is yes. The Curt # C99NR will be able to handle a small RV and has a 4-1/2" max rise and 5-1/2" max drop. However, it would be a good idea to measure and make sure the rise/drop will work well for the trailer. You can use the formula Hitch Height (A) - Coupler Height (B) = Rise/Drop (C). I have included a link below which explains exactly how to measure to find the rise/drop you need. If it falls between the max rise/drop of the ball mount then you're...
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?