Search: Mud flap   >  

Hey Robert, I spoke with both Ryan and Jake (installers here at etrailer) since they've both installed the Demco Tabless Base Plate Kit #DM77YV. Both Brad and Jake stated it's tough on the Mavericks and that they either drilled a self-tapping…

The Gen-Y Weld-On 2" Receiver Tube #325-GH-003 is 2-7/8" wide on the tube and 3-1/2" wide at the collar. The overall length is 12".

Hey Betty, it looks like the closest screen door slide we have to what you are looking for is the Lippert Screen Door Slider Panel with Push-Down Knob Opener #LC239061 which measures 9 3/4" tall x 12" wide. Apart from this one, you're…

Yes, you can get the individual mud flap #ERTO22 and it will fit the left or right side on the Rock Tammers adjustable mud flap #ERT00108.

Yes, for a replacement support rod for your Rocktamer mudflap you would need the part #ERT045.

The clamp that you need is the part #ERT048. This attaches the flap to the #ERT045 on your RockTamers Mudflap.

The length of the mudflap part #ERTO22 starts out at 24-1/4 inches but can be trimmed down shorter if needed.

The length of the Replacement Mud Flap for Enkay Rock Tamers HD Adjustable Mud Flap System #ERTO22 is 24-1/8 inches and the width is 23-7/8 inches.

Thanks for the photo. Honestly 5 inches of clearance from the fender to the top of the tire is fine if that is what you desire. We normally recommend 4 inches to allow for the suspension travel whether with leaf springs or torsion axles to allow…

I spoke with my contact at Lippert and she informed me that the part you are looking for is the part #LC353964. This is a replacement drive gear kit designed to fit the Solera power awning the #LC266149 you referenced fits. The gear by itself is not…

For a fender that will fit your tire size well we have the part #HP29VR. This fender measures 32 inches in length, 10-3/4 inches in width and is 15-1/4 inches in height. It would basically be just a bit wider and longer than your tire size so it…

If you are using the Optronics Rubber Grommet for 4 Inch Round Trailer Tail Lights, part #A45GB, with the Optronics Sealed, 4 Inch Round LED Trailer Stop, Turn and Tail Light, Flush Mount, part #STL23R-24B, you will want to drill a 4-1/2 inch cutout.…