Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The speed rating limitation for a trailer will come down to the tires, it has little to nothing to do with the axle, hub, or wheel size. That said, smaller tires generally do have lower speed ratings but you do not need to upgrade the wheels on…
view full answer...The Bulldog Powered-Drive Kit part #BD1824180100 is for two speed jacks whereas the Bulldog Powered-Drive Kit part #BD1824200100 is for single speed jacks. However, we can only confirm that these work with Bulldog jacks that have a 12,000 lb…
view full answer...I apologize for the confusion. It sounds like you have found some conflicting answers in the past, so I took the liberty to contact Bulldog directly and this is what they said: "The 12k RAM jack has a smaller diameter cross-shaft, therefore the…
view full answer...We don't carry Dexter leaf springs, but we do offer the 4,500, 26 inch long center eye to center eye equivalent as part #e27SR.
view full answer...Of course! We have two really good options for you which both come if white or black. The first is the Advent Air RV Air Conditioner w/ Air Distribution Box, Start Capacitor, and Heat Strip - 13,500 Btu part #ACM135CH for white or part #ACM135BCH for…
view full answer...For your 2021 Chevrolet Blazer you're going to need to start with a base plate kit. Since there aren't any Blue Ox base plates I'd recommend going with the Roadmaster Direct-Connect Base Plate Kit #RM-523204-5. These are just as good as…
view full answer...I spoke with my contact at Dexter and he said the 21-37 oil cap is obsolete and was replaced with the 21-36 oil cap, #RG04-270. This cap includes the o-ring and plug.
view full answer...I checked with Dexter and they indicate that for hub 008-386-80: "Available for service parts only." Meaning the actual hub assembly is not available but parts for it are such as the 35mm cartridge bearing #31-72-3. There isn't a way to…
view full answer...Yes, the 60-Degree angle of the 1/2"-20 DeeMaxx Trailer Wheel Lug Nut #DE93GR is standard for the vast majority of trailer wheels out there. There are some 90-Degree cone shapes but these are typically for 5/8" and 9/16" wheel bolts so…
view full answer...I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…
view full answer...The Lippert Components 5th Wheel RV Landing Gear Foot Pad - 9" Round #LC314667 is compatible with your landing gear leg. The Replacement Front Foot Pad for Lippert Components Ground Control 3.0 Leveling System #LC362486 will work for your system…
view full answer...If the trailer tongue in question is 3-1/2 inches round then you can use Bulldog coupler #BD028383. If you have a square or rectangular tongue then a 3-1/2 inch wide straight coupler is not available. You may be able to use a channel bracket like…
view full answer...Filter Your Search
Contact and Help