Search: 76209 > Trailer Hitch >
Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
This Hopkins wiring harness does fit your 2019 Toyota Highlander. Since the location of the factory wiring is located inside the car and not under/behind the bumper, you will likely be limited to the current location of the wiring. That being said,…
view full answer...Thanks for the picture! While we do not have an exact replacement for a Profile 2000 winch we do recommend the Dutton-Lainson Hand Winch item #DL14627 as a replacement. This winch has an 1,800 lbs capacity and will work great with the 20' x…
view full answer...I wasn't able to find much about the Bargman 30-73-011 except for that it looks like a square dome light with a switch, for which you could use pretty much any dome light you want to replace it. Personally, I would go with a surface-mount LED…
view full answer...You will need to measure the diameter of the spindles where the seal and bearings ride. Check out the picture I attached that shows where this is. You will need an exact measurement so either a digital or dial caliper will be needed. To pick out the…
view full answer...I may have a solution for you on this, but the short answer to this is- no. Stabilizer jacks and auto-leveling systems have two fairly different functions and the PSX2 system is not going to be able to function as an auto-leveling system with any…
view full answer...Hi Bob; the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ falls under the Dexter limited 5-year warranty. This covers defects in material and workmanship.
view full answer...We do have the Bulldog Sidewind Jack for Genie Basket Lifts - 2,000-lb #BD150415 which is designed specifically for Genie Basket lifts like you mentioned. For a caster to go with this jack I recommend the #BD500245 as it is the heaviest duty caster…
view full answer...Hello Jonathan. So, as far as hitch fitment goes, the hatchback and the wagon are one and the same. We just have it listed as 5-door wagon instead of hatchback. So, for a class 1 hitch for the 2015 Subaru Impreza, I recommend the Curt #C11286. This…
view full answer...I have a solution for you but the Tekonsha Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers item #3016 does not fit your 2013 Chevy Tahoe. It is for 2014 GM trucks and suv's. The correct wiring harness you will need to connect your…
view full answer...I was not able to reference the grease seal "5013/29772". We may still have a replacement for you but I would need you to measure either the inner diameter (I.D.) and outer diameter (O.D.) of the grease seal or the part of the spindle where…
view full answer...While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…
view full answer...Hi Alberto; the Curt #C37RV is what you need for your 2024 Hyundai Santa Fe Caligraphy Hybrid. Curt redesigned the older hitch so this fits all models of the 2021-2025 Santa Fe, including your Caligraphy Hybrid. This is a Class III hitch with a…
view full answer...Filters
- 2 results
Vehicle Fit
Related Searches